概要
ソリューション
HW評価ツール
リソース
Tools and Software
主要製品
Get Started

IO-Link通信ネットワーク(IEC 61131-9)は、アクチュエータおよびセンサ・レベルにまで至る双方向のポイント・ツー・ポイント・データ通信に使用することにより、データの前処理、センサ・パラメータの調整、および高度な診断を可能にし、Industry 4.0への道を開きます。

STは、IO-Linkトランシーバ、STM32マイクロコントローラ、プロテクション・デバイスなどの幅広いソリューションを提供して、静電放電(ESD)、バースト、およびサージ耐性に関するIEC 6100の要件への適合を支援するとともに、各種ハードウェアおよびソフトウェア評価ツールも提供しており、効率的なIO-Linkゲートウェイの実装をサポートしています。


    • The STEVAL-IDP004V1 (powered by an STM32F205) hosts four L6360 IO-Link and SIO (Standard Input Output) mode Master transceivers, and can retrieve information from up to four STEVAL-IDP003V1 sensor boards. These sensor boards are powered by an STM32L071 and host the L6362A IO-Link and SIO mode Device transceiver.

      The solution is for industrial applications running serial asynchronous communication protocols such as IO-Link.

      This evaluation tool replicates an industrial-sensor board (form factor is 8 x 70 mm), but it also lets you swap the sensors (four daughter boards are provided with VL6180X, IIS2DH, STTS751, IIS328DQ) so you can perform proximity, vibration, temperature or acceleration measurements.

      A GUI is available for use with any free terminal emulator.
      The two boards are equipped with standard industrial M12 connectors, as you would expect in real use scenarios involving predictive maintenance applications.
      The IO-Link protocol stack is not included in the package.
       

      Solution Components
      製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Buy All
      STEVAL-IDP004V1

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      続きを読む

      IO-Link master multi-port evaluation board based on L6360
      アクティブ
      L6360 123.73 購入
      STEVAL-IDP003V1

      Key features

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      続きを読む

      IO-Link industrial modular sensor board based on L6362A
      アクティブ
      L6362A 106.58 購入
      STSW-IO-LINK

      Key features

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      続きを読む

      IMAGE

      STSW-IO-LINK
      STSW-IO-LINK
      IO-Link demonstration kit firmware
      アクティブ
      -
      ソフトウェア
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-IO-LINK 1.1.1 Active ST
      STEVAL-IDP004V1

      説明 :

      IO-Link master multi-port evaluation board based on L6360

      Price (US$)*

      123.73

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      続きを読む

      STEVAL-IDP003V1

      説明 :

      IO-Link industrial modular sensor board based on L6362A

      Price (US$)*

      106.58

      Key features

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      続きを読む

      STSW-IO-LINK

      説明 :

      IO-Link demonstration kit firmware

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      続きを読む

      IMAGE

      STSW-IO-LINK
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-IO-LINK 1.1.1 Active ST

製品型番
概要
STEVAL-IDP004V2 IO-Link master multi-port evaluation board based on L6360 Quick view

Key Features

  • Master IO-Link stack embedded with read out protection
  • Limitation of time of use (10000 minutes)
  • Fully compatible with all IO-Link devices
  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master transceiver ICs
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-PCC009V2 IBU Motor Control & IPS universal interface Quick view

Key Features

  • Supports two modes:
    • application mode: the PC GUI allows SPI, I2 C and UART interfacing and control of the communication parameters
    • DFU mode: allows the user to change the firmware if required to suit specific applications
  • Board power supplied through a USB Mini B-type connector
  • DLL files provided to allow users to create a customized PC GUI
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board based on the L6360 Quick view

Key Features

  • Supply voltage from 18 V to 32.5 V
  • Fully protected programmable output stages
  • Supports COM1, COM2 and COM3 mode
  • 5 mA IO-Link digital input
  • Additional IEC61131-2 type-1 input
  • 3.3 V / 5 V, 50 mA linear regulator
  • Fast mode I2 C for IC control, configuration and diagnostic
  • Diagnostic dual LED sequence generator and driver
  • 5 V and 3.3 V compatible I/Os
  • Interface compatible with STEVAL-PCC009V2 and STEVAL-PCC009V1
  • EMC immune application against ESD, burst, surge, RF noise, etc., according to IEC61000-4-2, IEC61000-4-4, IEC61000-4-5, and IEC61000-4-6 standards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-OUT01A1 Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo Quick view

Key Features

  • Enables industrial programmable logic controller (PLC) capabilities on STM32 Nucleo
  • ISO8200BQ galvanic isolated octal high-side smart power solid state-relay
  • Operating voltage from 10.5 V to 33 V
  • Maximum operating output current per channel IOUT = 700 mA
  • Status LEDs: Fault, Thermal protection
  • Compatible with Arduino® UNO R3 connector
  • Compliance with EMC standards:
    • IEC61000-4-2: 8kV Contact Discharge and 15kV Air discharge
    • IEC61000-4-3: 4kV Discharge on output and supply line
    • IEC61000-4-5: 2kV Discharge on output and supply line
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP017V3 Evaluation board for IO-Link transceiver device L6362A Quick view

Key Features

  • Operating voltage from 7 to 36 V
  • Operating current up to 300 mA
  • Configurable in push-pull, high-side or low-side
  • Overcurrent protection with cutoff function
  • Overtemperature protection
  • Suitable to drive R, L and C loads
  • Delayed cutoff for quick charging of capacitive loads
  • Able to handle up to 500 mJ inductive loads
  • Full reverse polarity protection on VCC , GND, OUTH, OUTL and I/Q pins
  • Green device status LED (ON or OFF)
  • Red diagnostic LEDs for:
    • cutoff and overtemperature events
    • overload
  • Supports COM1, COM2 and COM3
  • Meets IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-5-2/IEC 61000-4-5 (surge) requirements
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDP003V1 IO-Link industrial modular sensor board based on L6362A Quick view

Key Features

  • Main supply voltage: 32 V maximum
  • STM32L071CZ microcontroller
  • IO-Link PHY using the L6362A device for data communication with host unit
  • DC-DC converter and linear regulator on board
  • Integrated reverse polarity protection on L6362A ICs
  • Multi-sensor connection
  • 400 kHz I²C communication
  • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
  • Designed to meet IEC industrial standard requirements
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDP004V1 IO-Link master multi-port evaluation board based on L6360 Quick view

Key Features

  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master devices
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-OUT02A1 Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo Quick view

Key Features

  • Based on the ISO8200AQ whose main characteristics are:
    • Embedded 4kV galvanic isolation
    • Radio frequency communication between the logic and process sides for maximum noise immunity
    • Very low power dissipation (RON(MAX) = 220 mΩ)
    • Fast decay for inductive loads
    • 20 MHz SPI I/F on logic side
    • VCC power good diagnostics
    • Overload and overheating protections with thermal shutdown and diagnostics
    • QFN-32L (9x11x1 mm) package
  • 10.5 to 33 V operating voltage range
  • Green LED (x8) for output on/off status
  • Red LED for process supply power good fault
  • Red LED for overload and overheating
  • Supply reverse polarity protection
  • EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connectors
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
P-NUCLEO-IOD01A1 STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack) Quick view

Key Features

  • Equipped with Arduino UNO R3 connectors and compatible with STEVAL-IOD003V1, X-NUCLEO-IKS01A2 and NUCLEO-L073RZ boards.
  • The STEVAL-IOD003V1 features:
    • IO-Link (PHY) device layer based on L6362A
    • Operating voltage range 6.5 to 35 V
    • Dedicated CQ overload pin (wake-up)
    • Diagnostics pin (UVLO, overtemperature and cut-off)
    • UART interface
    • Linear regulators for independent supply from +24 V bus (12 mA 3.3 V and 100 mA 12 V)
    • LEDs for status and diagnostics
    • Overload and overheating protections with non-dissipative cut-off function
    • Full reverse polarity on IO-Link interface pins
    • EMC protections according to IO-Link v1.1 and IEC 60947-5-2
    • Ground and VCC wire break protections
  • The X-NUCLEO-IKS01A2 features:
    • LSM6DSL 3D accelerometer and 3D gyroscope
    • LSM303AGR 3D accelerometer and 3D magnetometer
    • LPS22HB pressure sensor
    • HTS221 capacitive digital relative humidity and temperature
    • DIL24 socket for additional MEMS adapters and other sensors
    • Free comprehensive development firmware library and samples for all sensors compatible with STM32Cube firmware
  • The NUCLEO-L073RZ features:
    • STM32L073RZT6 32-bit microcontroller based on ARM® Cortex® -M0+ core
    • Pre-programmed IO-Link device stack (v1.1 compatible)
    • Arduino UNO R3 connectivity and ST morpho extension pin headers
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
P-NUCLEO-IOM01M1 STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack Quick view

Key Features

  • STEVAL-IOM001V1
    • IO-Link master PHY based on L6360
    • Interrupt diagnostics pin
    • I²C and UART interface
    • SPI (slave) interface
    • 65 mA selectable (3.3 or 5.0 V) linear regulator
    • CQ (push-pull) and L+ (high side) switches
    • IQ additional IEC61131-2 type 1 digital input
    • L+ and CQ overload and overheating protections with non-dissipative cut-off function
    • QFN-26L (3.5x5x1 mm) package
    • Operating voltage range from 18 to 32.5 V
    • Additional high side switch for L+ heavy loads (IPS161H)
    • LEDs for status and diagnostics
    • Ground and VCC wire break protections
    • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
    • Equipped with ST morpho connectors
    • CE certified
    • RoHS and China RoHS compliant
  • NUCLEO-F446RE
    • STM32F446RET6 32-bit Micro-controller based on ARM® Cortex® -M4 core (180 MHz max.) with 512-Kbyte Flash memory and 128 (+4) Kbyte RAM
    • Two types of extension resources: Arduino™ UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IOM001V1 IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo Quick view

Key Features

  • IO-Link master PHY based on L6360
  • Interrupt diagnostics pin
  • I²C and UART interface
  • SPI (slave) interface
  • 65 mA selectable (3.3 or 5.0 V) linear regulator
  • CQ (push-pull) and L+ (high side) switches
  • IQ additional IEC61131-2 type 1 digital input
  • L+ and CQ overload and overheating protections with non-dissipative cut-off function
  • QFN-26L (3.5x5x1 mm) package
  • Operating voltage range from 18 to 32.5 V
  • Additional high side switch for L+ heavy loads (IPS161H)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Equipped with ST morpho connectors
  • CE certified
  • RoHS and China RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IOD003V1 IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo Quick view

Key Features

  • L6362A IO-Link device transceiver main characteristics:
    • IO-Link PHY layer
    • Dedicated overload diagnostics pin
    • UART interface
    • Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator
    • Overload and overheating protections with non-dissipative cut-off function
    • Full reverse polarity on IO-Link interface pins
    • EMC protections (as per IO-Link v1.1)
    • Surge protection (as per IEC 60947-5-2)
    • DFN-12L (3x3x0.9 mm) package
  • 6.5 to 35 V operating voltage range
  • On-board 100 mA 12 V linear regulator (L78L)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • RoHS and China RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP005V2 High side driver demonstration board based on the VN751PT Quick view

Key Features

  • RoHS compliant
  • Transil addition between TRIAC A2-G terminals
  • Overvoltage protection is not implemented on the board but some solder pads are available to implement it in two different ways:
  • Free development area with hole matrix available for application breadboard adaptation
  • 3 independent application programsHand dryer with infrared sensor and T1235H-6T switchBathroom fan with humidity sensor and ACS108 switchMulti-entrance room controller with push button and BTB08-600SW switch
  • Capacitive power supply (680 nF capacitor EPCOS B32923C36845 V ±10%Average output current: 16 mAStandby power losses < 0.3 W @ 230 V
  • Two potentiometers for setting sensor sensitivity and TRIAC turn-off delay
  • ICC connector for software adjustment
  • Varistor addition between mains voltage
  • Program selector (U2)

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
製品型番
STEVAL-IDP004V2

IO-Link master multi-port evaluation board based on L6360

Key Features

  • Master IO-Link stack embedded with read out protection
  • Limitation of time of use (10000 minutes)
  • Fully compatible with all IO-Link devices
  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master transceiver ICs
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-PCC009V2

IBU Motor Control & IPS universal interface

Key Features

  • Supports two modes:
    • application mode: the PC GUI allows SPI, I2 C and UART interfacing and control of the communication parameters
    • DFU mode: allows the user to change the firmware if required to suit specific applications
  • Board power supplied through a USB Mini B-type connector
  • DLL files provided to allow users to create a customized PC GUI
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP016V2

IO-Link communication master transceiver demonstration board based on the L6360

Key Features

  • Supply voltage from 18 V to 32.5 V
  • Fully protected programmable output stages
  • Supports COM1, COM2 and COM3 mode
  • 5 mA IO-Link digital input
  • Additional IEC61131-2 type-1 input
  • 3.3 V / 5 V, 50 mA linear regulator
  • Fast mode I2 C for IC control, configuration and diagnostic
  • Diagnostic dual LED sequence generator and driver
  • 5 V and 3.3 V compatible I/Os
  • Interface compatible with STEVAL-PCC009V2 and STEVAL-PCC009V1
  • EMC immune application against ESD, burst, surge, RF noise, etc., according to IEC61000-4-2, IEC61000-4-4, IEC61000-4-5, and IEC61000-4-6 standards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-OUT01A1

Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo

Key Features

  • Enables industrial programmable logic controller (PLC) capabilities on STM32 Nucleo
  • ISO8200BQ galvanic isolated octal high-side smart power solid state-relay
  • Operating voltage from 10.5 V to 33 V
  • Maximum operating output current per channel IOUT = 700 mA
  • Status LEDs: Fault, Thermal protection
  • Compatible with Arduino® UNO R3 connector
  • Compliance with EMC standards:
    • IEC61000-4-2: 8kV Contact Discharge and 15kV Air discharge
    • IEC61000-4-3: 4kV Discharge on output and supply line
    • IEC61000-4-5: 2kV Discharge on output and supply line
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP017V3

Evaluation board for IO-Link transceiver device L6362A

Key Features

  • Operating voltage from 7 to 36 V
  • Operating current up to 300 mA
  • Configurable in push-pull, high-side or low-side
  • Overcurrent protection with cutoff function
  • Overtemperature protection
  • Suitable to drive R, L and C loads
  • Delayed cutoff for quick charging of capacitive loads
  • Able to handle up to 500 mJ inductive loads
  • Full reverse polarity protection on VCC , GND, OUTH, OUTL and I/Q pins
  • Green device status LED (ON or OFF)
  • Red diagnostic LEDs for:
    • cutoff and overtemperature events
    • overload
  • Supports COM1, COM2 and COM3
  • Meets IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-5-2/IEC 61000-4-5 (surge) requirements
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDP003V1

IO-Link industrial modular sensor board based on L6362A

Key Features

  • Main supply voltage: 32 V maximum
  • STM32L071CZ microcontroller
  • IO-Link PHY using the L6362A device for data communication with host unit
  • DC-DC converter and linear regulator on board
  • Integrated reverse polarity protection on L6362A ICs
  • Multi-sensor connection
  • 400 kHz I²C communication
  • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
  • Designed to meet IEC industrial standard requirements
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDP004V1

IO-Link master multi-port evaluation board based on L6360

Key Features

  • Main supply voltage 32 V maximum
  • 4 L6360 IO-Link master devices
  • RS-485 serial interface
  • CAN serial interface
  • USB interface
  • DC-DC converter
  • On-board reverse polarity protection
  • Designed to meet IEC requirement for industrial standards
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-OUT02A1

Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo

Key Features

  • Based on the ISO8200AQ whose main characteristics are:
    • Embedded 4kV galvanic isolation
    • Radio frequency communication between the logic and process sides for maximum noise immunity
    • Very low power dissipation (RON(MAX) = 220 mΩ)
    • Fast decay for inductive loads
    • 20 MHz SPI I/F on logic side
    • VCC power good diagnostics
    • Overload and overheating protections with thermal shutdown and diagnostics
    • QFN-32L (9x11x1 mm) package
  • 10.5 to 33 V operating voltage range
  • Green LED (x8) for output on/off status
  • Red LED for process supply power good fault
  • Red LED for overload and overheating
  • Supply reverse polarity protection
  • EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connectors
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
P-NUCLEO-IOD01A1

STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack)

Key Features

  • Equipped with Arduino UNO R3 connectors and compatible with STEVAL-IOD003V1, X-NUCLEO-IKS01A2 and NUCLEO-L073RZ boards.
  • The STEVAL-IOD003V1 features:
    • IO-Link (PHY) device layer based on L6362A
    • Operating voltage range 6.5 to 35 V
    • Dedicated CQ overload pin (wake-up)
    • Diagnostics pin (UVLO, overtemperature and cut-off)
    • UART interface
    • Linear regulators for independent supply from +24 V bus (12 mA 3.3 V and 100 mA 12 V)
    • LEDs for status and diagnostics
    • Overload and overheating protections with non-dissipative cut-off function
    • Full reverse polarity on IO-Link interface pins
    • EMC protections according to IO-Link v1.1 and IEC 60947-5-2
    • Ground and VCC wire break protections
  • The X-NUCLEO-IKS01A2 features:
    • LSM6DSL 3D accelerometer and 3D gyroscope
    • LSM303AGR 3D accelerometer and 3D magnetometer
    • LPS22HB pressure sensor
    • HTS221 capacitive digital relative humidity and temperature
    • DIL24 socket for additional MEMS adapters and other sensors
    • Free comprehensive development firmware library and samples for all sensors compatible with STM32Cube firmware
  • The NUCLEO-L073RZ features:
    • STM32L073RZT6 32-bit microcontroller based on ARM® Cortex® -M0+ core
    • Pre-programmed IO-Link device stack (v1.1 compatible)
    • Arduino UNO R3 connectivity and ST morpho extension pin headers
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
P-NUCLEO-IOM01M1

STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack

Key Features

  • STEVAL-IOM001V1
    • IO-Link master PHY based on L6360
    • Interrupt diagnostics pin
    • I²C and UART interface
    • SPI (slave) interface
    • 65 mA selectable (3.3 or 5.0 V) linear regulator
    • CQ (push-pull) and L+ (high side) switches
    • IQ additional IEC61131-2 type 1 digital input
    • L+ and CQ overload and overheating protections with non-dissipative cut-off function
    • QFN-26L (3.5x5x1 mm) package
    • Operating voltage range from 18 to 32.5 V
    • Additional high side switch for L+ heavy loads (IPS161H)
    • LEDs for status and diagnostics
    • Ground and VCC wire break protections
    • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
    • Equipped with ST morpho connectors
    • CE certified
    • RoHS and China RoHS compliant
  • NUCLEO-F446RE
    • STM32F446RET6 32-bit Micro-controller based on ARM® Cortex® -M4 core (180 MHz max.) with 512-Kbyte Flash memory and 128 (+4) Kbyte RAM
    • Two types of extension resources: Arduino™ UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IOM001V1

IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo

Key Features

  • IO-Link master PHY based on L6360
  • Interrupt diagnostics pin
  • I²C and UART interface
  • SPI (slave) interface
  • 65 mA selectable (3.3 or 5.0 V) linear regulator
  • CQ (push-pull) and L+ (high side) switches
  • IQ additional IEC61131-2 type 1 digital input
  • L+ and CQ overload and overheating protections with non-dissipative cut-off function
  • QFN-26L (3.5x5x1 mm) package
  • Operating voltage range from 18 to 32.5 V
  • Additional high side switch for L+ heavy loads (IPS161H)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Equipped with ST morpho connectors
  • CE certified
  • RoHS and China RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IOD003V1

IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo

Key Features

  • L6362A IO-Link device transceiver main characteristics:
    • IO-Link PHY layer
    • Dedicated overload diagnostics pin
    • UART interface
    • Selectable 12 mA 3.3 V or 10 mA 5.0 V linear regulator
    • Overload and overheating protections with non-dissipative cut-off function
    • Full reverse polarity on IO-Link interface pins
    • EMC protections (as per IO-Link v1.1)
    • Surge protection (as per IEC 60947-5-2)
    • DFN-12L (3x3x0.9 mm) package
  • 6.5 to 35 V operating voltage range
  • On-board 100 mA 12 V linear regulator (L78L)
  • LEDs for status and diagnostics
  • Ground and VCC wire break protections
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • RoHS and China RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IFP005V2

High side driver demonstration board based on the VN751PT

Key Features

  • RoHS compliant
  • Transil addition between TRIAC A2-G terminals
  • Overvoltage protection is not implemented on the board but some solder pads are available to implement it in two different ways:
  • Free development area with hole matrix available for application breadboard adaptation
  • 3 independent application programsHand dryer with infrared sensor and T1235H-6T switchBathroom fan with humidity sensor and ACS108 switchMulti-entrance room controller with push button and BTB08-600SW switch
  • Capacitive power supply (680 nF capacitor EPCOS B32923C36845 V ±10%Average output current: 16 mAStandby power losses < 0.3 W @ 230 V
  • Two potentiometers for setting sensor sensitivity and TRIAC turn-off delay
  • ICC connector for software adjustment
  • Varistor addition between mains voltage
  • Program selector (U2)

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN5041
      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit
      3.0
      1.96 MB
      PDF
      AN4113
      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32F05x USART
      1.3
      142.25 KB
      PDF
      AN3070
      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32™’s USART
      1.4
      188.96 KB
      PDF
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN4828
      STEVAL-IFP017V3 evaluation board based on the L6362A transceiver for IO-Link and SIO mode communication
      1.0
      992.21 KB
      PDF
      AN5041

      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit

      AN4113

      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32F05x USART

      AN3070

      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32™’s USART

      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

      AN4828

      STEVAL-IFP017V3 evaluation board based on the L6362A transceiver for IO-Link and SIO mode communication

    • 概要 バージョン サイズ アクション
      UM2421
      Getting started with the P-NUCLEO-IOM01M1 full IO-Link master (PHY plus stack) evaluation board and development system
      3.0
      981.99 KB
      PDF
      UM2421

      Getting started with the P-NUCLEO-IOM01M1 full IO-Link master (PHY plus stack) evaluation board and development system

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      L6360 and L6362A: A smart way to drive industrial sensors and actuators 1.0
      906.99 KB
      PDF
      STM32 and STM8 embedded software solutions 7.0
      3.12 MB
      PDF

      L6360 and L6362A: A smart way to drive industrial sensors and actuators

      STM32 and STM8 embedded software solutions

関連資料

    • 概要 バージョン サイズ アクション
      L6360 &amp; L6362A - Industry 4.0をサポート 07.2018
      272.77 KB
      PDF

      L6360 &amp; L6362A - Industry 4.0をサポート

    • 概要 バージョン サイズ アクション
      Intelligent power switches (IPS) 04.2018
      627.09 KB
      PDF
      IO-Link向け ソリューション 08.2017
      1.12 MB
      PDF
      スマート・インダストリ向け 製品 &amp; ソリューション ガイド 3.1
      3.41 MB
      PDF

      Intelligent power switches (IPS)

      IO-Link向け ソリューション

      スマート・インダストリ向け 製品 &amp; ソリューション ガイド

ソフトウェア製品

    • 製品型番

      STSW-IFP016V2 application software setup

      IO-Link demonstration kit firmware

      L6362A IO-Link communication transceiver device IC evaluation software based on STM32Cube

      Graphical user interface for the STEVAL-IOM001V1 and STEVAL-IOD003V1 IO-Link evaluation boards

      L6360 IO-Link communication transceiver master IC evaluation software based on STM32Cube

    • 製品型番

      Managing the Driver Enable signal for RS-485 and IO-Link communications with the STM32 USART

      Managing the driver enable signal for RS-485 and IO-Link communications with the STM32F05x USART (AN4113)

eDesignSuite

コンバータ

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

パワー・マネージメント

Part number 概要
L6360 IO-Link communication master transceiver IC
L6362A IO-Link communication transceiver device IC
Part number
IO-Link communication master transceiver IC
IO-Link communication transceiver device IC