概要
ソリューション
HW評価ツール
リソース
ツール & ソフトウェア
主要製品
Get Started

製品や資産は、コンテナやパレットに積載され、最終目的地に到着するまでに長期間、世界中を移動する場合があります。そのため、世界各地でも倉庫や物流拠点の内部でもその位置を追跡管理し、輸送中に内部の温度や湿度などの諸条件を常時把握することが極めて重要です。

STは、低消費電力の短距離ワイヤレス通信モジュール(Bluetooth® low energy、NFCなど)、GPS / GNSSソリューション、幅広いモーション・センサ(加速度センサ、ジャイロ・センサ、地磁気センサ)と環境センサ(温度 / 湿度センサ、大気圧センサ)や、低消費電力マイクロコントローラSTM32を提供して、パレットおよびコンテナ向けの超低消費電力トラッキング・ソリューションの開発を支援しています。

推奨製品

    • 製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Teseo-LIV3F

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      続きを読む

      Tiny GNSS module
      Active
      13.94 Buy now
      EVB-LIV3F

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      続きを読む

      TESEO LIV3F module evaluation board
      Active
      165.38 Buy now
      TESEO-SUITE

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      続きを読む

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family
      Active
      -
      ソフトウェア
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      TESEO-SUITE 5.2.3 Active ST
      Teseo-LIV3F

      説明 :

      Tiny GNSS module

      Price (US$)*

      13.94

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      続きを読む

      EVB-LIV3F

      説明 :

      TESEO LIV3F module evaluation board

      Price (US$)*

      165.38

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      続きを読む

      TESEO-SUITE

      説明 :

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      続きを読む

      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      TESEO-SUITE 5.2.3 Active ST

製品型番
概要
CLOUD-ST25TA02KB Evaluation board for ST25TA series Quick view

主な特徴

  • Ready-to-use printed circuit board with
    • ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
    • 19 mm2 single layer inductive antenna, etched on the PCB
  • Contactless interface
    • TruST25™ digital signature
    • NFC Forum Type 4 Tag
    • ISO/IEC 14443 Type A
    • 106 kbps data rate
    • Internal 50 pF tuning capacitance, enabling design of small inductive antennas
  • Memory
    • 256 Byte (2 Kbit) EEPROM with NDEF data support
    • 200-year data retention
    • 1 million erase-write cycles endurance
    • 128-bit password data protection
    • 20-bit event counter for read or write access with anti-tearing feature
  • Digital pad
    • Configurable general purpose output (GPO) indicating, for example, RF field detection

さらに表示

画像

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-STRKT01 LoRa® IoT tracker Quick view

主な特徴

  • Optimized IoT tracker solution over LoRaWAN™ network with simultaneous multi-constellation GNSS positioning and geofencing support
  • Battery operated solution with smart power management architecture
  • First IoT ST reference embedding a USB Type-C connector and a port controller
  • Environmental and motion sensors
  • Data logging
  • STM32Cube function pack (FP-ATR-LORA1)
  • High flexibility to cover different application profiles:
    • asset tracker
    • people and animal tracker
    • fleet management
  • WEEE and RoHS compliant
  • 2006/66/EC Directive compliant
  • Contains trasmitter module FCC ID: VPYCMABZ and IC ID: 772C-CMABZ
  • CE certified

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI187V1 ArgonKey mezzanine board based on different ST sensors Quick view

主な特徴

  • The following ST MEMS sensors are mounted:
    • LSM6DSL 6-axis inertial module
    • LIS2MDL Magnetic sensor
    • LPS22HB Pressure sensor
    • HTS221 Humidity and Temperature sensor
    • MP34DT05-AMicrophone
  • VL53L0X gesture detector
  • Based on STM32F412C microcontroller

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V2 STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1 Quick view

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI183V1 LPS33HW adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete LPS33HW pinout for a standard DIL 24 socket
  • Fully compatible with and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA109V2 800 mA, 3 MHz, adjustable output high efficiency dual-mode buck-boost DC-DC converter based on the STBB2 Quick view

主な特徴

  • Input voltage: from 2.3 V to 5.5 V
  • Output voltage: 3.3 V
  • Output current: 800 mA
  • Operating frequency: 3 MHz
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY Discovery kit for the M24SR series - Dynamic NFC/RFID tag Quick view

主な特徴

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-L053R8 STM32 Nucleo-64 development board with STM32L053R8 MCU, supports Arduino and ST morpho connectivity Quick view

主な特徴

  • Common features
    • STM32 microcontroller in LQFP64 package
    • 1 user LED shared with Arduino™
    • 1 user and 1 reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External SMPS to generate Vcore logic supply
    • 24 MHz HSE
    • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI151V1 LIS2DH12 3-axis accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2 Quick view

主な特徴

  • Complete LIS2DH12 pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI153V1 H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2 Quick view

主な特徴

  • Complete H3LIS331DL pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI141V2 HTS221 humidity sensor adapter board for standard DIL24 socket (full pinout) Quick view

主な特徴

  • Complete HTS221 pinout (SPI & I²C interface) for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

主な特徴

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI155V3 Microphone coupon board based on the MP34DT01-M digital MEMS microphone Quick view

主な特徴

  • 4xMP34DT01-M top port digital MEMS microphones
  • Functions as a daughterboard for use with STEVAL-MKI126Vx kit
  • V supply from 1.64 to 3.6 V
  • 120 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • PDM single-bit output
  • 61 dB of SNR
  • Sensitivity -26 dBFS
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-L476RG STM32 Nucleo-64 development board with STM32L476RG MCU, supports Arduino and ST morpho connectivity Quick view

主な特徴

  • Common features
    • STM32 microcontroller in LQFP64 package
    • 1 user LED shared with Arduino™
    • 1 user and 1 reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External SMPS to generate Vcore logic supply
    • 24 MHz HSE
    • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-CCA02M1 Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo. Quick view

主な特徴

  • 2 on-board MP34DT01-M digital MEMS microphones
  • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
  • Synchronized acquisition and streaming of up to 4 microphones
  • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connector (upwards and downwards)
  • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MET001V1 LPS22HB adapter board for a standard DIL 24 socket Quick view

主な特徴

  • Complete LPS22HB pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI172V1 LSM303AGR adapter board for a standard DIL 24 socket Quick view

主な特徴

  • Complete LSM303AGR pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

主な特徴

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1 SensorTile development kit Quick view

主な特徴

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1 Li-Ion/Li-Po battery power management evaluation board based on STBC02 Quick view

主な特徴

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A2 Motion MEMS and environmental sensor expansion board for STM32 Nucleo Quick view

主な特徴

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

主な特徴

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

主な特徴

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • リセットボタン
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
B-L072Z-LRWAN1 STM32L0 Discovery kit LoRa, Sigfox, low-power wireless Quick view

主な特徴

  • CMWX1ZZABZ-091 LoRa® /Sigfox™ module (Murata)
    • Embedded ultra-low-power STM32L072CZ MCU, based on Arm® Cortex® -M0+ core, with 192 Kbytes of Flash memory, 20 Kbytes of RAM, 20 Kbytes of EEPROM
    • Frequency range: 860 MHz - 930 MHz
    • USB 2.0 FS
    • 4-channel,12-bit ADC, 2 × DAC
    • 6-bit timers, LP-UART, I2 C and SPI
    • Embedded SX1276 transceiver
    • LoRa® , FSK, GFSK, MSK, GMSK, and OOK modulations (+ Sigfox™ compatibility)
    • +14 dBm or +20 dBm selectable output power
    • 157 dB maximum link budget
    • Programmable bit rate up to 300 kbit/s
    • High sensitivity: down to -137 dBm
    • Bullet-proof front end: IIP3 = -12.5 dBm
    • 89 dB blocking immunity
    • Low Rx current of 10 mA, 200 nA register retention
    • Fully integrated synthesizer with a resolution of 61 Hz
    • Built-in bit synchronizer for clock recovery
    • Sync word recognition
    • Preamble detection
    • 127 dB+ dynamic range RSSI
    • LoRaWAN™ Class A certified
  • SMA and U.FL RF interface connectors
  • Including 50-ohm SMA RF antenna
  • 7 LEDs:
    • 4 general-purpose LEDs
    • 5 V power LED
    • ST-LINK-communication LED
    • Fault-power LED
  • 1 user and 1 reset push-buttons
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  • Arduino™ Uno V3 connectors
  • Board power supply through the USB bus or external VIN/3.3 V supply voltage or batteries
  • 3 × AAA-type battery holder for standalone operation
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® , GCC-based IDEs, Arm® Mbed™

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT Quick view

主な特徴

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
I-NUCLEO-LRWAN1 USI® STM32™ Nucleo expansion board for LoRa™ Quick view

主な特徴

  • USI® low-cost, LPWAN module supporting LoRa® technology:
    • ST ultra-low-power STM32L052T8Y6 MCU, Cortex® -M0+ based with 64 Kbytes of Flash memory, 8 Kbytes of RAM, 2 Kbytes of EEPROM, T-RNG
    • Semtech SX1272 radio transceiver supporting LoRa® , FSK, GFSK, MSK, GMSK and OOK modulation
    • High sensitivity down to -137 dBm
    • 860 MHz to 1020 MHz frequency range
    • 14 dBm to 20 dBm output power
    • 2.0 V to 3.6 V voltage range
    • -40°C to +85°C temperature range
    • Embedded 32 kHz and 32 MHz crystals
    • USART communication interface
  • ST accelerometer and magnetometer sensor (LSM303AGR)
  • ST relative humidity and temperature sensor (HTS221)
  • ST pressure sensor (LPS22HB)
  • Arduino™ connectors
  • SMA connector (antenna included in the kit)

さらに表示

画像

Image
Image
X-NUCLEO-NFC05A1 NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos Quick view

主な特徴

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVB-LIV3F TESEO LIV3F module evaluation board Quick view

主な特徴

  • ST Teseo-LIV3F GNSS platform
  • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
  • USB Power Supply and battery charge
  • Internal battery footprint for standalone usage
  • ON/OFF and Reset buttons available
  • NMEA over
    • UART by USB
    • I2C by connector
  • PPS output
  • Leds:
    • PPS
    • Power

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

主な特徴

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI139V5 Microphone coupon board based on the MP23AB01DH fully differential analog MEMS microphone Quick view

主な特徴

  • 4 x MP23AB01DH bottom port analog MEMS microphones
  • Vsupply from 2.3 to 3.6 V
  • 135 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • Frequency range 100 Hz - 10 kHz
  • 65 dB of SNR
  • Sensitivity -38 dBFV ± 1 dBV
  • THD < 0.2% @ 94 dBSPL, 1 kHz
  • THD < 5% @ 130 dBSPL, 1 kHz
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1 BlueCoin Starter kit Quick view

主な特徴

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-GNSS1A1 GNSS expansion board based on Teseo-LIV3F module for STM32 Nucleo Quick view

主な特徴

  • Operating supply voltage: 3.3 - 5 V
  • Ambient temperature: -40/+85 °C
  • Sensitivity: -162 dBm indoor (tracking mode)
  • Interfaces:
    • a UART port
    • an I²C port
    • Configurable digital I/O timepulse
    • EXTINT input for wakeup
  • NMEA protocol
  • Assisted GNSS:
    • Predictive autonomous
    • Predictive server-based
    • Real-time server-based
  • Compatible with STM32 Nucleo boards
  • Compatible with the Arduino™ UNO R3 connector
  • LNA and SAW filter on the RF path
  • SMA female antenna connector
  • Battery holder
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI179V1 LIS2DW12 adapter board for a standard DIL 24 socket Quick view

主な特徴

  • Complete LIS2DW12 pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-MKI181V1 LIS2MDL adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete LIS2MDL pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SMARTAG1 NFC Dynamic Tag sensor node evaluation board Quick view

主な特徴

  • ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
  • STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
  • LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
  • LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
  • HTS221 capacitive digital sensor for relative humidity and temperature
  • STLQ015 low drop linear regulator power management
  • CR2032 Battery powered (not included)
  • STM32Cube function pack (FP-SNS-SMARTAG1)
  • Android (Google Play) and iOS demo apps (ST SmarTag)
  • Suitable for the following applications:
    • Internet of Things
    • Supply Chain and Cold-Chain Management
    • Smart building, home and city
    • Retail and apparel
    • Smart packaging
    • Medical and pharmaceutical
    • Batteryless sensing
    • Smart agriculture (soil control, animal tracking, etc.)

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-FKI868V2 Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP Quick view

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-FKI433V2 Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP Quick view

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25-TAG-BAG-A The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM Quick view

主な特徴

  • ST25TA02K with a wet inlay 10*17 mm2 copper antenna
  • ST25TA02K with a wet inlay aluminum antenna
  • ST25TA02K with round- and square-stickers aluminum antennas
  • ST25TA64K with a PET card
  • ST25TA64K with a water-proof tag

さらに表示

画像

Image
Image
STEVAL-MKI178V2 LSM6DSL adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete LMS6DSL pinout for a standard DIL24 socket
  • Default compatibility with STEVAL-MKI109V3 motherboard
  • Also compatible with the STEVAL-MKI109V2 motherboard by changing resistor settings (R2, R4, R6 and R8)
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
製品型番
CLOUD-ST25TA02KB

Evaluation board for ST25TA series

主な特徴

  • Ready-to-use printed circuit board with
    • ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
    • 19 mm2 single layer inductive antenna, etched on the PCB
  • Contactless interface
    • TruST25™ digital signature
    • NFC Forum Type 4 Tag
    • ISO/IEC 14443 Type A
    • 106 kbps data rate
    • Internal 50 pF tuning capacitance, enabling design of small inductive antennas
  • Memory
    • 256 Byte (2 Kbit) EEPROM with NDEF data support
    • 200-year data retention
    • 1 million erase-write cycles endurance
    • 128-bit password data protection
    • 20-bit event counter for read or write access with anti-tearing feature
  • Digital pad
    • Configurable general purpose output (GPO) indicating, for example, RF field detection

さらに表示

画像

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-STRKT01

LoRa® IoT tracker

主な特徴

  • Optimized IoT tracker solution over LoRaWAN™ network with simultaneous multi-constellation GNSS positioning and geofencing support
  • Battery operated solution with smart power management architecture
  • First IoT ST reference embedding a USB Type-C connector and a port controller
  • Environmental and motion sensors
  • Data logging
  • STM32Cube function pack (FP-ATR-LORA1)
  • High flexibility to cover different application profiles:
    • asset tracker
    • people and animal tracker
    • fleet management
  • WEEE and RoHS compliant
  • 2006/66/EC Directive compliant
  • Contains trasmitter module FCC ID: VPYCMABZ and IC ID: 772C-CMABZ
  • CE certified

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI187V1

ArgonKey mezzanine board based on different ST sensors

主な特徴

  • The following ST MEMS sensors are mounted:
    • LSM6DSL 6-axis inertial module
    • LIS2MDL Magnetic sensor
    • LPS22HB Pressure sensor
    • HTS221 Humidity and Temperature sensor
    • MP34DT05-AMicrophone
  • VL53L0X gesture detector
  • Based on STM32F412C microcontroller

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V2

STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI183V1

LPS33HW adapter board for a standard DIL24 socket

主な特徴

  • Complete LPS33HW pinout for a standard DIL 24 socket
  • Fully compatible with and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA109V2

800 mA, 3 MHz, adjustable output high efficiency dual-mode buck-boost DC-DC converter based on the STBB2

主な特徴

  • Input voltage: from 2.3 V to 5.5 V
  • Output voltage: 3.3 V
  • Output current: 800 mA
  • Operating frequency: 3 MHz
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

主な特徴

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-L053R8

STM32 Nucleo-64 development board with STM32L053R8 MCU, supports Arduino and ST morpho connectivity

主な特徴

  • Common features
    • STM32 microcontroller in LQFP64 package
    • 1 user LED shared with Arduino™
    • 1 user and 1 reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External SMPS to generate Vcore logic supply
    • 24 MHz HSE
    • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI151V1

LIS2DH12 3-axis accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2

主な特徴

  • Complete LIS2DH12 pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI153V1

H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2

主な特徴

  • Complete H3LIS331DL pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI141V2

HTS221 humidity sensor adapter board for standard DIL24 socket (full pinout)

主な特徴

  • Complete HTS221 pinout (SPI & I²C interface) for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

主な特徴

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI155V3

Microphone coupon board based on the MP34DT01-M digital MEMS microphone

主な特徴

  • 4xMP34DT01-M top port digital MEMS microphones
  • Functions as a daughterboard for use with STEVAL-MKI126Vx kit
  • V supply from 1.64 to 3.6 V
  • 120 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • PDM single-bit output
  • 61 dB of SNR
  • Sensitivity -26 dBFS
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-L476RG

STM32 Nucleo-64 development board with STM32L476RG MCU, supports Arduino and ST morpho connectivity

主な特徴

  • Common features
    • STM32 microcontroller in LQFP64 package
    • 1 user LED shared with Arduino™
    • 1 user and 1 reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External SMPS to generate Vcore logic supply
    • 24 MHz HSE
    • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-CCA02M1

Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.

主な特徴

  • 2 on-board MP34DT01-M digital MEMS microphones
  • 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
  • Synchronized acquisition and streaming of up to 4 microphones
  • Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connector (upwards and downwards)
  • Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MET001V1

LPS22HB adapter board for a standard DIL 24 socket

主な特徴

  • Complete LPS22HB pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI172V1

LSM303AGR adapter board for a standard DIL 24 socket

主な特徴

  • Complete LSM303AGR pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

主な特徴

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1

SensorTile development kit

主な特徴

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1

Li-Ion/Li-Po battery power management evaluation board based on STBC02

主な特徴

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IKS01A2

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

主な特徴

  • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
  • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
  • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
  • HTS221: capacitive digital relative humidity and temperature
  • DIL24 socket for additional MEMS adapters and other sensors
  • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
  • I²C sensor hub features on LSM6DSL available
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

主な特徴

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

主な特徴

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • リセットボタン
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
B-L072Z-LRWAN1

STM32L0 Discovery kit LoRa, Sigfox, low-power wireless

主な特徴

  • CMWX1ZZABZ-091 LoRa® /Sigfox™ module (Murata)
    • Embedded ultra-low-power STM32L072CZ MCU, based on Arm® Cortex® -M0+ core, with 192 Kbytes of Flash memory, 20 Kbytes of RAM, 20 Kbytes of EEPROM
    • Frequency range: 860 MHz - 930 MHz
    • USB 2.0 FS
    • 4-channel,12-bit ADC, 2 × DAC
    • 6-bit timers, LP-UART, I2 C and SPI
    • Embedded SX1276 transceiver
    • LoRa® , FSK, GFSK, MSK, GMSK, and OOK modulations (+ Sigfox™ compatibility)
    • +14 dBm or +20 dBm selectable output power
    • 157 dB maximum link budget
    • Programmable bit rate up to 300 kbit/s
    • High sensitivity: down to -137 dBm
    • Bullet-proof front end: IIP3 = -12.5 dBm
    • 89 dB blocking immunity
    • Low Rx current of 10 mA, 200 nA register retention
    • Fully integrated synthesizer with a resolution of 61 Hz
    • Built-in bit synchronizer for clock recovery
    • Sync word recognition
    • Preamble detection
    • 127 dB+ dynamic range RSSI
    • LoRaWAN™ Class A certified
  • SMA and U.FL RF interface connectors
  • Including 50-ohm SMA RF antenna
  • 7 LEDs:
    • 4 general-purpose LEDs
    • 5 V power LED
    • ST-LINK-communication LED
    • Fault-power LED
  • 1 user and 1 reset push-buttons
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
  • Arduino™ Uno V3 connectors
  • Board power supply through the USB bus or external VIN/3.3 V supply voltage or batteries
  • 3 × AAA-type battery holder for standalone operation
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® , GCC-based IDEs, Arm® Mbed™

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

主な特徴

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
I-NUCLEO-LRWAN1

USI® STM32™ Nucleo expansion board for LoRa™

主な特徴

  • USI® low-cost, LPWAN module supporting LoRa® technology:
    • ST ultra-low-power STM32L052T8Y6 MCU, Cortex® -M0+ based with 64 Kbytes of Flash memory, 8 Kbytes of RAM, 2 Kbytes of EEPROM, T-RNG
    • Semtech SX1272 radio transceiver supporting LoRa® , FSK, GFSK, MSK, GMSK and OOK modulation
    • High sensitivity down to -137 dBm
    • 860 MHz to 1020 MHz frequency range
    • 14 dBm to 20 dBm output power
    • 2.0 V to 3.6 V voltage range
    • -40°C to +85°C temperature range
    • Embedded 32 kHz and 32 MHz crystals
    • USART communication interface
  • ST accelerometer and magnetometer sensor (LSM303AGR)
  • ST relative humidity and temperature sensor (HTS221)
  • ST pressure sensor (LPS22HB)
  • Arduino™ connectors
  • SMA connector (antenna included in the kit)

さらに表示

画像

Image
Image
X-NUCLEO-NFC05A1

NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos

主な特徴

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVB-LIV3F

TESEO LIV3F module evaluation board

主な特徴

  • ST Teseo-LIV3F GNSS platform
  • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
  • USB Power Supply and battery charge
  • Internal battery footprint for standalone usage
  • ON/OFF and Reset buttons available
  • NMEA over
    • UART by USB
    • I2C by connector
  • PPS output
  • Leds:
    • PPS
    • Power

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

主な特徴

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI139V5

Microphone coupon board based on the MP23AB01DH fully differential analog MEMS microphone

主な特徴

  • 4 x MP23AB01DH bottom port analog MEMS microphones
  • Vsupply from 2.3 to 3.6 V
  • 135 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • Frequency range 100 Hz - 10 kHz
  • 65 dB of SNR
  • Sensitivity -38 dBFV ± 1 dBV
  • THD < 0.2% @ 94 dBSPL, 1 kHz
  • THD < 5% @ 130 dBSPL, 1 kHz
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1

BlueCoin Starter kit

主な特徴

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-GNSS1A1

GNSS expansion board based on Teseo-LIV3F module for STM32 Nucleo

主な特徴

  • Operating supply voltage: 3.3 - 5 V
  • Ambient temperature: -40/+85 °C
  • Sensitivity: -162 dBm indoor (tracking mode)
  • Interfaces:
    • a UART port
    • an I²C port
    • Configurable digital I/O timepulse
    • EXTINT input for wakeup
  • NMEA protocol
  • Assisted GNSS:
    • Predictive autonomous
    • Predictive server-based
    • Real-time server-based
  • Compatible with STM32 Nucleo boards
  • Compatible with the Arduino™ UNO R3 connector
  • LNA and SAW filter on the RF path
  • SMA female antenna connector
  • Battery holder
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI179V1

LIS2DW12 adapter board for a standard DIL 24 socket

主な特徴

  • Complete LIS2DW12 pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

BOM Gerber
STEVAL-MKI181V1

LIS2MDL adapter board for a standard DIL24 socket

主な特徴

  • Complete LIS2MDL pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SMARTAG1

NFC Dynamic Tag sensor node evaluation board

主な特徴

  • ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
  • STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
  • LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
  • LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
  • HTS221 capacitive digital sensor for relative humidity and temperature
  • STLQ015 low drop linear regulator power management
  • CR2032 Battery powered (not included)
  • STM32Cube function pack (FP-SNS-SMARTAG1)
  • Android (Google Play) and iOS demo apps (ST SmarTag)
  • Suitable for the following applications:
    • Internet of Things
    • Supply Chain and Cold-Chain Management
    • Smart building, home and city
    • Retail and apparel
    • Smart packaging
    • Medical and pharmaceutical
    • Batteryless sensing
    • Smart agriculture (soil control, animal tracking, etc.)

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-FKI433V2

Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25-TAG-BAG-A

The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM

主な特徴

  • ST25TA02K with a wet inlay 10*17 mm2 copper antenna
  • ST25TA02K with a wet inlay aluminum antenna
  • ST25TA02K with round- and square-stickers aluminum antennas
  • ST25TA64K with a PET card
  • ST25TA64K with a water-proof tag

さらに表示

画像

Image
Image
STEVAL-MKI178V2

LSM6DSL adapter board for a standard DIL24 socket

主な特徴

  • Complete LMS6DSL pinout for a standard DIL24 socket
  • Default compatibility with STEVAL-MKI109V3 motherboard
  • Also compatible with the STEVAL-MKI109V2 motherboard by changing resistor settings (R2, R4, R6 and R8)
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4974
      Antenna matching for ST25R3911B/ST25R391x devices
      2.0
      3 MB
      PDF
      AN4914
      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices
      2.0
      1.9 MB
      PDF
      AN4428
      Best practices in the manufacturing process of MEMS microphones
      1.1
      1 MB
      PDF
      AN4818
      Bringing up the BlueNRG-1, BlueNRG-2 devices
      8.0
      6.26 MB
      PDF
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN4503
      Environmental sensors: Hardware abstraction layer for Android
      3.0
      241.61 KB
      PDF
      AN4427
      Gasket design for optimal acoustic performance in MEMS microphones
      2.0
      840.29 KB
      PDF
      AN4722
      HTS221 digital humidity sensor: hardware guidelines for system integration
      1.0
      844.49 KB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN5005
      LIS2DH12: MEMS digital output motion sensor ultra-low-power high-performance 3-axis "nano" accelerometer
      2.0
      2.14 MB
      PDF
      AN5038
      LIS2DW12: always-on 3D accelerometer
      3.0
      1.18 MB
      PDF
      AN4672
      LPS22HB/LPS25HB digital pressure sensors: hardware guidelines for system integration
      3.0
      1,005.15 KB
      PDF
      AN5063
      LPS33HW digital pressure sensor: guidelines for system integration
      1.0
      681.3 KB
      PDF
      AN5040
      LSM6DSL: always-on 3D accelerometer and 3D gyroscope
      3.0
      1.5 MB
      PDF
      AN5043
      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices
      4.0
      873.78 KB
      PDF
      AN4833
      Measuring pressure data from ST's LPS22HB digital pressure sensor
      2.0
      923.98 KB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN4947
      PCB design guidelines for the S2-LP transceiver
      2.0
      1.07 MB
      PDF
      AN4433
      Storing data into the NDEF memory of M24SR
      2.0
      507.23 KB
      PDF
      AN4426
      Tutorial for MEMS microphones
      2.0
      947.08 KB
      PDF
      AN4825
      Ultra-compact high-performance eCompass module based on the LSM303AGR
      1.0
      1.67 MB
      PDF
      AN4985
      Wake-up mode of the ST25R3911B/ST25R391x
      1.0
      805.57 KB
      PDF
      AN4974

      Antenna matching for ST25R3911B/ST25R391x devices

      AN4914

      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices

      AN4428

      Best practices in the manufacturing process of MEMS microphones

      AN4818

      Bringing up the BlueNRG-1, BlueNRG-2 devices

      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN4503

      Environmental sensors: Hardware abstraction layer for Android

      AN4427

      Gasket design for optimal acoustic performance in MEMS microphones

      AN4722

      HTS221 digital humidity sensor: hardware guidelines for system integration

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN5005

      LIS2DH12: MEMS digital output motion sensor ultra-low-power high-performance 3-axis "nano" accelerometer

      AN5038

      LIS2DW12: always-on 3D accelerometer

      AN4672

      LPS22HB/LPS25HB digital pressure sensors: hardware guidelines for system integration

      AN5063

      LPS33HW digital pressure sensor: guidelines for system integration

      AN5040

      LSM6DSL: always-on 3D accelerometer and 3D gyroscope

      AN5043

      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices

      AN4833

      Measuring pressure data from ST's LPS22HB digital pressure sensor

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN4947

      PCB design guidelines for the S2-LP transceiver

      AN4433

      Storing data into the NDEF memory of M24SR

      AN4426

      Tutorial for MEMS microphones

      AN4825

      Ultra-compact high-performance eCompass module based on the LSM303AGR

      AN4985

      Wake-up mode of the ST25R3911B/ST25R391x

    • 概要 バージョン サイズ アクション
      TN1219
      HTS221 digital humidity sensor: reference design implementation
      2.0
      367.08 KB
      PDF
      TN1229
      How to interpret pressure and temperature readings in the LPS22HB pressure sensor
      1.0
      211.13 KB
      PDF
      TN1251
      How to interpret pressure and temperature readings in the LPS33HW pressure sensor
      1.0
      197.58 KB
      PDF
      TN1218
      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor
      4.0
      3.67 MB
      PDF
      TN1198
      Surface mount guidelines for MEMS sensors in HLGA packages
      1.0
      128.17 KB
      PDF
      TN0018
      Surface mounting guidelines for MEMS sensors in an LGA package
      6.0
      214.31 KB
      PDF
      TN1219

      HTS221 digital humidity sensor: reference design implementation

      TN1229

      How to interpret pressure and temperature readings in the LPS22HB pressure sensor

      TN1251

      How to interpret pressure and temperature readings in the LPS33HW pressure sensor

      TN1218

      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor

      TN1198

      Surface mount guidelines for MEMS sensors in HLGA packages

      TN0018

      Surface mounting guidelines for MEMS sensors in an LGA package

    • 概要 バージョン サイズ アクション
      UM2229
      ST Teseo-LIV3F binary image - User manual
      3.0
      4.23 MB
      PDF
      UM1718
      STM32CubeMX for STM32 configuration and initialization C code generation
      29.0
      26.65 MB
      PDF
      UM2231
      Teseo-LIV3 GNSS Module - Hardware Manual
      6.0
      1.32 MB
      PDF
      UM2229

      ST Teseo-LIV3F binary image - User manual

      UM1718

      STM32CubeMX for STM32 configuration and initialization C code generation

      UM2231

      Teseo-LIV3 GNSS Module - Hardware Manual

    • 概要 バージョン サイズ アクション
      PM0257
      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines
      4.0
      1.06 MB
      PDF
      PM0257

      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      EEPROM 2 Mbit highest density memories 1.0
      2.49 MB
      PDF
      M24SR Product Presentation 2.1
      1.27 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF
      ST25TA NFC Tags Product Presentation 1.0
      1.49 MB
      PDF

      EEPROM 2 Mbit highest density memories

      M24SR Product Presentation

      ST25DV-I2C product presentation

      ST25TA NFC Tags Product Presentation

Publications and Collaterals

    • 概要 バージョン サイズ アクション
      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip 3.1
      273.59 KB
      PDF
      LIS2DW12 Flexible ultra-low-power 3-axis smart accelerometer 1.0
      813.75 KB
      PDF
      MEMS analog and digital microphones
      989.69 KB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.24 MB
      PDF
      NFC /RFID tags ST25TA series 1.0
      809.42 KB
      PDF
      S2-LP:Ultra-low-power, high-performance, sub-1GHz RF transceiver 1.2
      664.12 KB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      831.22 KB
      PDF
      STM32 Nucleo boards - Unified scalable offering 17.6
      913.03 KB
      PDF

      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip

      LIS2DW12 Flexible ultra-low-power 3-axis smart accelerometer

      MEMS analog and digital microphones

      NFC / RFID tags M24SR series

      NFC /RFID tags ST25TA series

      S2-LP:Ultra-low-power, high-performance, sub-1GHz RF transceiver

      ST25DV-I2C series - Dynamic NFC/RFID tags

      STM32 Nucleo boards - Unified scalable offering

    • 概要 バージョン サイズ アクション
      EEPROM selection guide 2.0
      475.96 KB
      PDF

      EEPROM selection guide

    • 概要 バージョン サイズ アクション
      Operational amplifiers: performance, robust and advanced technology
      1.41 MB
      PDF
      ROBOTS for a better living 1.0
      1.16 MB
      PDF
      STM32 32-bit MCU family - Leading supplier of Arm® Cortex®-M microcontrollers 17.3
      1.34 MB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 17.5
      1.66 MB
      PDF

      Operational amplifiers: performance, robust and advanced technology

      ROBOTS for a better living

      STM32 32-bit MCU family - Leading supplier of Arm® Cortex®-M microcontrollers

      STM32L series - Ultra-low-power 32-bit MCUs

開発ツール・ハードウェア

    • 製品型番

      STM32Cube initialization code generator

ソフトウェア製品

    • 製品型番

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

    • 製品型番

      Embedded software samples for BlueCoin: data streaming via USB and BLE, logging on SD card, gesture recognition, audio acquisition and playback

      BlueNRG-1, BlueNRG-2 DK SW package

      Unico GUI - MEMS evaluation kit software package for Windows

      Evaluation SW package based on S2-LP

      Evaluation SW package based on S2-LP

      Embedded software samples for SensorTile, including sensor data streaming via USB and BLE, data logging on SD card, audio acquisition and playback

      GUI for X-CUBE-MEMS1, motion MEMS and environmental sensor software expansion for STM32Cube