概要
ソリューション
HW評価ツール
リソース
Tools and Software
主要製品
Get Started

電動工具は、ドリルやねじ回しから複雑なインテリジェント・レンチやガーデニング用具まで、さまざまな形状のものがあり、AC電源から給電するものとコードレスでバッテリ駆動式のものがあります。

電動工具では、日曜大工向けでも本格的な業務用でも、機器のタイプや必要な性能に応じて、ブラシ付きDCモータ3相ブラシレスDCモータ、または誘導モータが使用されます。

内部の電子回路は、高効率(特にコードレス設計の場合)で耐用期間が長く、モーション・センシングや通信などの新しい機能に対応して幅広い用途に対応する必要があります。

STは、パワーMOSFET、インテリジェント・パワー・モジュール(IPM)、MOSFET / IGBT駆動用のゲート・ドライバ、モノリシック・モータ・ドライバなど、電動工具の各種モータや電力定格に適合する幅広いモータ制御ソリューションや、幅広いラインアップを備えた32bitマイクロコントローラSTM32、モーション・センサ、および測距センサを提供しています。

power tools block diagram
    • 製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Buy All
      NUCLEO-L476RG

      主な特徴

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      STM32 Nucleo-64 development board with STM32L476RG MCU, supports Arduino and ST morpho connectivity
      アクティブ
      STM32L476RG 13.72 購入
      X-NUCLEO-IDB05A1

      主な特徴

      • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
      • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
      • SPBTLE-RF:
        • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
        • Integrated Balun (BALF-NRG-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Scalable solution, capable of cascading multiple boards for larger systems
      • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo
      アクティブ
      SPBTLE-RF; BlueNRG-MS; BALF-NRG-01D3 12.87 購入
      X-NUCLEO-IKS01A2

      主な特徴

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      続きを読む

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo
      アクティブ
      LSM6DSL; LSM303AGR; LPS22HB; HTS221 18.38 購入
      FP-SNS-MOTENV1

      主な特徴

      • Complete firmware to develop an IoT node with BLE connectivity, environmental and motion sensors
      • Middleware libraries for sensor data fusion and accelerometer-based real-time activity recognition
      • Compatible with BlueMS applications for Android/iOS, to perform sensor data reading, motion algorithm features demo and firmware update (FOTA)
      • Example implementation available for the X-NUCLEO-IKS01A2 (or X-NUCLEO-IKS01A1), P-NUCLEO-IKA02A1 and X-NUCLEO-IDB05A1 (or X- NUCLEO-IDB04A1) connected to a NUCLEO-F401RE or NUCLEO-L476RG or NUCLEO-L053R8 board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-SNS-MOTENV1
      FP-SNS-MOTENV1
      STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors
      アクティブ
      -
      ソフトウェア
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-SNS-MOTENV1 STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors 3.3.0 ST -
      NUCLEO-L476RG

      説明 :

      STM32 Nucleo-64 development board with STM32L476RG MCU, supports Arduino and ST morpho connectivity

      Price (US$)*

      13.72

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      X-NUCLEO-IDB05A1

      説明 :

      Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

      Price (US$)*

      12.87

      Key features

      • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
      • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
      • SPBTLE-RF:
        • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
        • Integrated Balun (BALF-NRG-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Scalable solution, capable of cascading multiple boards for larger systems
      • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      X-NUCLEO-IKS01A2

      説明 :

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

      Price (US$)*

      18.38

      Key features

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      続きを読む

      FP-SNS-MOTENV1

      説明 :

      STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Complete firmware to develop an IoT node with BLE connectivity, environmental and motion sensors
      • Middleware libraries for sensor data fusion and accelerometer-based real-time activity recognition
      • Compatible with BlueMS applications for Android/iOS, to perform sensor data reading, motion algorithm features demo and firmware update (FOTA)
      • Example implementation available for the X-NUCLEO-IKS01A2 (or X-NUCLEO-IKS01A1), P-NUCLEO-IKA02A1 and X-NUCLEO-IDB05A1 (or X- NUCLEO-IDB04A1) connected to a NUCLEO-F401RE or NUCLEO-L476RG or NUCLEO-L053R8 board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-SNS-MOTENV1
      FP-SNS-MOTENV1
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-SNS-MOTENV1 STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors 3.3.0 ST -

製品型番
概要
STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL6498L Evaluation board for the L6498L gate driver Quick view

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI868V2 Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP Quick view

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3204 Six-step brushless motor driver evaluation board for applications based on the STSPIN32F0B BLDC controller Quick view

主な特徴

  • Input voltage from 7 to 45 V
  • Output current up to 15 ARMS
  • Power stage based on STD140N6F7 MOSFET
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM032V1 150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control Quick view

主な特徴

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14 Quick view

主な特徴

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM036V1 Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B Quick view

主な特徴

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package Quick view

主な特徴

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM040V1 BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™ Quick view

主な特徴

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM
STEVAL-IHM035V2 3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano) Quick view

主な特徴

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM045V1 3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano) Quick view

主な特徴

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 Quick view

主な特徴

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI153V1 H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2 Quick view

主な特徴

  • Complete H3LIS331DL pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM028V2 2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module Quick view

主な特徴

  • Complete solution for a 2 kW power inverter
  • HV supply mode: voltage 90 VAC to 285 VAC or direct DC line 125 V DC to 400 V DC
  • Input voltage range extended to +400 V, for PFC compliance
  • Input inrush limiter with bypassing relay
  • Brake feature with overvoltage comparator
  • Single- or three-shunt resistor current sensing method
  • Hall sensor or encoder input
  • Tachometer input
  • Overtemperature and overcurrent hardware protection
  • Active fan with automatic overtemperature switching
  • Compact and safe design
  • Universal conception for further evaluation with bread board and testing pins
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM023V3 1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT Quick view

主な特徴

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

主な特徴

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IHM08M1 Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo Quick view

主な特徴

  • 3-phase driver board for BLDC/PMSM motors
  • Nominal operating voltage range from 10 V to 48 V DC
  • 15 ARMS output current
  • Operating frequency selectable by firmware
  • Overcurrent detection and protection (30 Apeak )
  • Thermal monitoring and overheating protection
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connectors
  • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
  • Hall/Encoder motor sensor connector and circuit
  • Debug connector for DAC, GPIOs, etc.
  • Potentiometer available for speed regulation
  • User LED
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IDS01A4 Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo Quick view

主な特徴

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL6491HB Demonstration board for L6491 gate driver with smart shut down feature Quick view

主な特徴

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主な特徴

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM05F 500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM07F 700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 700 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI169V1 I3G4250D adapter board for a standard DIL 24 socket Quick view

主な特徴

  • Complete I3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM08B 800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3201 STSPIN32F0 Advanced BLDC controller with embedded STM32 MCU evaluation board Quick view

主な特徴

  • Input voltage from 8 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • 3-shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully supporting STM32 PMSM FOC Software Development Kit (STSW-STM32100)
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI915V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

主な特徴

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3202 STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board Quick view

主な特徴

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

主な特徴

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI182V1 ISM330DLC adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete ISM330DLC pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPMNM1N 60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPMNM2N 100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI433V2 Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP Quick view

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-CTM009V1 5 kW low voltage high current inverter for industrial motor control applications Quick view

主な特徴

  • STEVAL-CTM004V1 (power board)
    • insulated metal substrate (IMS)
    • hosts 36 STH310N10F7 or STH315N10F7 power MOSFETs in the H²PAK-6 (6x switch) package
    • Decoupling gate resistors (2.2 Ω)
    • 3-shunt resistors ground referred for current sensing (optional)
    • 3 NTCs for thermal protection
  • STEVAL-CTM005V1 (bulk capacitor board)
    • 22x 270 μF, 100 V through-hole aluminium electrolytic capacitor
  • STEVAL-CTM006V1 (driver board)
    • based on 3x L6491 gate driver with current capability up to 4 A sink/source
    • 34-pin MC connector
    • overcurrent, overtemperature and overvoltage protection
  • STEVAL-CTM008V1 (current sensing board)
    • accurate phase current sensing
    • DC current sensing (ICS not mounted)
    • possibility of overdriving VREF with an external reference voltage

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
製品型番
STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主な特徴

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL6498L

Evaluation board for the L6498L gate driver

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3204

Six-step brushless motor driver evaluation board for applications based on the STSPIN32F0B BLDC controller

主な特徴

  • Input voltage from 7 to 45 V
  • Output current up to 15 ARMS
  • Power stage based on STD140N6F7 MOSFET
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • RoHS and WEEE compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM032V1

150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control

主な特徴

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA095V1

Up to 3 A step-down switching regulator based on the ST1S14

主な特徴

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM036V1

Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

主な特徴

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA099V1

3 A step-down switching demonstration board based on the L7986 in DFN10 package

主な特徴

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM040V1

BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™

主な特徴

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM
STEVAL-IHM035V2

3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)

主な特徴

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM045V1

3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)

主な特徴

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

主な特徴

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI153V1

H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2

主な特徴

  • Complete H3LIS331DL pinout for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM028V2

2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module

主な特徴

  • Complete solution for a 2 kW power inverter
  • HV supply mode: voltage 90 VAC to 285 VAC or direct DC line 125 V DC to 400 V DC
  • Input voltage range extended to +400 V, for PFC compliance
  • Input inrush limiter with bypassing relay
  • Brake feature with overvoltage comparator
  • Single- or three-shunt resistor current sensing method
  • Hall sensor or encoder input
  • Tachometer input
  • Overtemperature and overcurrent hardware protection
  • Active fan with automatic overtemperature switching
  • Compact and safe design
  • Universal conception for further evaluation with bread board and testing pins
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IHM023V3

1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT

主な特徴

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

主な特徴

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IHM08M1

Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo

主な特徴

  • 3-phase driver board for BLDC/PMSM motors
  • Nominal operating voltage range from 10 V to 48 V DC
  • 15 ARMS output current
  • Operating frequency selectable by firmware
  • Overcurrent detection and protection (30 Apeak )
  • Thermal monitoring and overheating protection
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connectors
  • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
  • Hall/Encoder motor sensor connector and circuit
  • Debug connector for DAC, GPIOs, etc.
  • Potentiometer available for speed regulation
  • User LED
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IDS01A4

Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo

主な特徴

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL6491HB

Demonstration board for L6491 gate driver with smart shut down feature

主な特徴

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主な特徴

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM05F

500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM07F

700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 700 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI169V1

I3G4250D adapter board for a standard DIL 24 socket

主な特徴

  • Complete I3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPM08B

800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3201

STSPIN32F0 Advanced BLDC controller with embedded STM32 MCU evaluation board

主な特徴

  • Input voltage from 8 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • 3-shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully supporting STM32 PMSM FOC Software Development Kit (STSW-STM32100)
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI915V1

Sub-1GHz transceiver development kit based on S2-LP

主な特徴

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-SPIN3202

STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board

主な特徴

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

主な特徴

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-MKI182V1

ISM330DLC adapter board for a standard DIL24 socket

主な特徴

  • Complete ISM330DLC pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPMNM1N

60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-IPMNM2N

100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-FKI433V2

Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

主な特徴

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-CTM009V1

5 kW low voltage high current inverter for industrial motor control applications

主な特徴

  • STEVAL-CTM004V1 (power board)
    • insulated metal substrate (IMS)
    • hosts 36 STH310N10F7 or STH315N10F7 power MOSFETs in the H²PAK-6 (6x switch) package
    • Decoupling gate resistors (2.2 Ω)
    • 3-shunt resistors ground referred for current sensing (optional)
    • 3 NTCs for thermal protection
  • STEVAL-CTM005V1 (bulk capacitor board)
    • 22x 270 μF, 100 V through-hole aluminium electrolytic capacitor
  • STEVAL-CTM006V1 (driver board)
    • based on 3x L6491 gate driver with current capability up to 4 A sink/source
    • 34-pin MC connector
    • overcurrent, overtemperature and overvoltage protection
  • STEVAL-CTM008V1 (current sensing board)
    • accurate phase current sensing
    • DC current sensing (ICS not mounted)
    • possibility of overdriving VREF with an external reference voltage

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4607
      Basics on the thyristor (SCR) structure and its application
      2.0
      317.41 KB
      PDF
      AN4966
      Design guidelines for the shutdown function in the SLLIMM-nano series
      1.0
      1.54 MB
      PDF
      AN4694
      EMC design guides for motor control applications
      1.0
      2.13 MB
      PDF
      AN4030
      Gate to cathode capacitor, impact on Triac immunity and reliability
      1.0
      223.75 KB
      PDF
      AN4363
      How to select the Triac, ACS, or ACST that fits your application
      2.1
      361.44 KB
      PDF
      AN4608
      How to select the right thyristor (SCR) for your application
      1.0
      895.7 KB
      PDF
      AN4544
      IGBT datasheet tutorial
      1.1
      2.4 MB
      PDF
      AN5125
      ISM330DLC: 3D accelerometer and 3D gyroscope with digital output for industrial applications
      2.0
      1.62 MB
      PDF
      AN441
      Inductive load control with AC switches
      3.2
      712.21 KB
      PDF
      AN4564
      Is a positive power supply mandatory for my application, or could a negative output work also?
      1.0
      384.04 KB
      PDF
      AN5417
      Low consumption standby implementation with STSPIN32F0 family
      1.0
      317.32 KB
      PDF
      AN4193
      Low duty cycle operation with the SPIRIT1 transceiver
      2.0
      225.38 KB
      PDF
      AN3168
      Non-insulated SCR / Triac control circuits
      1.2
      315.8 KB
      PDF
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN2703
      Parameter list for SCRs, TRIACs, AC switches, and DIACS
      2.6
      98.99 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN440
      QII and QIII TRIAC triggering with positive power supply
      3.4
      97.11 KB
      PDF
      AN437
      RC snubber circuit design for TRIACs
      2.6
      587.73 KB
      PDF
      AN533
      SCRs, TRIACs, and AC switches, thermal management precautions for handling and mounting
      3.6
      217.19 KB
      PDF
      AN4768
      SLLIMM™ 2nd series small low-loss intelligent molded module
      4.0
      23.7 MB
      PDF
      AN3338
      SLLIMM™ small low-loss intelligent molded module
      2.0
      5.96 MB
      PDF
      AN4840
      SLLIMM™-nano 2nd series small low-loss intelligent molded module
      1.0
      3.63 MB
      PDF
      AN4043
      SLLIMM™-nano small low-loss intelligent molded module
      2.0
      8.28 MB
      PDF
      AN4198
      SPIRIT1: increasing the output power
      1.0
      387.86 KB
      PDF
      AN4999
      STSPIN32F0 overcurrent protection
      1.0
      1.2 MB
      PDF
      AN5128
      STSPIN32F0/F0A - buck converter
      1.0
      334.87 KB
      PDF
      AN5123
      STSPIN32F0A - bootloader and USART protocol
      1.0
      265.82 KB
      PDF
      AN439
      Snubberless™ and logic level TRIAC behavior at turn-off
      3.4
      458.5 KB
      PDF
      AN308
      TRIAC analog control circuits for inductive loads
      4.2
      141.89 KB
      PDF
      AN442
      TRIACS AND MICROCONTROLLERS - THE EASY CONNECTION
      2.1
      55.99 KB
      PDF
      AN3169
      Technology performance comparison of Triacs subjected to fast transient voltages
      1.1
      169.53 KB
      PDF
      AN302
      Thyristors and TRIACs: holding current - an important parameter
      3.5
      138.63 KB
      PDF
      AN303
      Thyristors and TRIACs: latching current
      3.4
      164.96 KB
      PDF
      AN4076
      Two or three shunt resistor based current sensing circuit design in 3-phase inverters
      1.6
      1.17 MB
      PDF
      AN4772
      wM-Bus (2013) firmware stack overview
      1.0
      786.08 KB
      PDF
      AN4607

      Basics on the thyristor (SCR) structure and its application

      AN4966

      Design guidelines for the shutdown function in the SLLIMM-nano series

      AN4694

      EMC design guides for motor control applications

      AN4030

      Gate to cathode capacitor, impact on Triac immunity and reliability

      AN4363

      How to select the Triac, ACS, or ACST that fits your application

      AN4608

      How to select the right thyristor (SCR) for your application

      AN4544

      IGBT datasheet tutorial

      AN5125

      ISM330DLC: 3D accelerometer and 3D gyroscope with digital output for industrial applications

      AN441

      Inductive load control with AC switches

      AN4564

      Is a positive power supply mandatory for my application, or could a negative output work also?

      AN5417

      Low consumption standby implementation with STSPIN32F0 family

      AN4193

      Low duty cycle operation with the SPIRIT1 transceiver

      AN3168

      Non-insulated SCR / Triac control circuits

      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN2703

      Parameter list for SCRs, TRIACs, AC switches, and DIACS

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN440

      QII and QIII TRIAC triggering with positive power supply

      AN437

      RC snubber circuit design for TRIACs

      AN533

      SCRs, TRIACs, and AC switches, thermal management precautions for handling and mounting

      AN4768

      SLLIMM™ 2nd series small low-loss intelligent molded module

      AN3338

      SLLIMM™ small low-loss intelligent molded module

      AN4840

      SLLIMM™-nano 2nd series small low-loss intelligent molded module

      AN4043

      SLLIMM™-nano small low-loss intelligent molded module

      AN4198

      SPIRIT1: increasing the output power

      AN4999

      STSPIN32F0 overcurrent protection

      AN5128

      STSPIN32F0/F0A - buck converter

      AN5123

      STSPIN32F0A - bootloader and USART protocol

      AN439

      Snubberless™ and logic level TRIAC behavior at turn-off

      AN308

      TRIAC analog control circuits for inductive loads

      AN442

      TRIACS AND MICROCONTROLLERS - THE EASY CONNECTION

      AN3169

      Technology performance comparison of Triacs subjected to fast transient voltages

      AN302

      Thyristors and TRIACs: holding current - an important parameter

      AN303

      Thyristors and TRIACs: latching current

      AN4076

      Two or three shunt resistor based current sensing circuit design in 3-phase inverters

      AN4772

      wM-Bus (2013) firmware stack overview

    • 概要 バージョン サイズ アクション
      TN1221
      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)
      1.0
      542.38 KB
      PDF
      TN1220
      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)
      1.0
      604.33 KB
      PDF
      TN0107
      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)
      4.0
      698.06 KB
      PDF
      TN1037
      SLLIMM™-nano mounting instructions and heatsink
      3.0
      1.21 MB
      PDF
      TN0018
      Surface mounting guidelines for MEMS sensors in an LGA package
      6.0
      214.31 KB
      PDF
      TN1221

      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)

      TN1220

      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)

      TN0107

      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)

      TN1037

      SLLIMM™-nano mounting instructions and heatsink

      TN0018

      Surface mounting guidelines for MEMS sensors in an LGA package

    • 概要 バージョン サイズ アクション
      UM1036
      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60
      2.0
      1.58 MB
      PDF
      UM0969
      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A
      2.0
      3.07 MB
      PDF
      UM1483
      Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B
      1.1
      591.59 KB
      PDF
      UM2325
      ST PowerStudio パワー・デバイス用動的電気・熱シミュレーション・ソフトウェア
      1.0
      3.61 MB
      PDF
      UM1036

      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60

      UM0969

      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A

      UM1483

      Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

      UM2325

      ST PowerStudio パワー・デバイス用動的電気・熱シミュレーション・ソフトウェア

    • 概要 バージョン サイズ アクション
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.1
      1.78 MB
      PDF
      PM0257
      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines
      4.1
      1.06 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      An introduction to electric motors 1.0
      2.23 MB
      PDF
      ST PowerStudio overview 1.0
      1.81 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      An introduction to electric motors

      ST PowerStudio overview

      X-NUCLEO-IDB05A1 Quick start guide

関連資料

    • 概要 バージョン サイズ アクション
      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series 1.0
      351.54 KB
      PDF
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      189.85 KB
      PDF
      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip 3.1
      273.59 KB
      PDF
      DC-DC converters
      557.92 KB
      PDF
      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V) 1.0
      844.43 KB
      PDF
      ISM330DLC iNEMO® 6-axis inertial module for Industry 4.0 1.0
      684.95 KB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      STSPINモータ・ドライバIC 7 x 7mm小型QFNパッケージに 32bitマイコンを搭載 11.2018
      210.5 KB
      PDF
      S2-LP:Ultra-low-power, high-performance, sub-1GHz RF transceiver 1.2
      664.12 KB
      PDF
      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules 1.2
      877.68 KB
      PDF
      ST Diodes Finder : the new app for Android and iOS 2.0
      1.46 MB
      PDF
      ST Thyristor Finder: SCRs and Triacs on Android and iOS 1.0
      854.07 KB
      PDF

      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip

      DC-DC converters

      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V)

      ISM330DLC iNEMO® 6-axis inertial module for Industry 4.0

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      STSPINモータ・ドライバIC 7 x 7mm小型QFNパッケージに 32bitマイコンを搭載

      S2-LP:Ultra-low-power, high-performance, sub-1GHz RF transceiver

      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules

      ST Diodes Finder : the new app for Android and iOS

      ST Thyristor Finder: SCRs and Triacs on Android and iOS

    • 概要 バージョン サイズ アクション
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      STSPIN モータ・ドライバ 09.2016
      377.82 KB
      PDF
      Thyristors, Triacs, AC switches and A.S.D™ selection guide 2.0
      1.51 MB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

      STSPIN モータ・ドライバ

      Thyristors, Triacs, AC switches and A.S.D™ selection guide

    • 概要 バージョン サイズ アクション
      モータ制御 リファレンス ガイド 15.11
      2.67 MB
      PDF
      スマート・インダストリ向け 製品 & ソリューション ガイド 3.1
      3.41 MB
      PDF

      モータ制御 リファレンス ガイド

      スマート・インダストリ向け 製品 & ソリューション ガイド

    • 概要 バージョン サイズ アクション
      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control 1.0
      5.54 MB
      PDF

      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control

ソフトウェア製品

    • 製品型番

      STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors

      Bluetooth Low Energy software expansion for STM32Cube

      STM32 Motor Control Software Development Kit (MCSDK)

      Sub-1 GHz RF communication software expansion for STM32Cube

    • 製品型番

      Standard C platform-independent drivers for MEMS motion and environmental sensors

    • 製品型番

      Six-step motor driving library for STSPIN32F0 and STSPIN32F0A

    • 製品型番

      STSW-BNRG-S2LP evaluation software package based on BlueNRG-1 and S2-LP

      BlueNRG current consumption estimation tool

eDesignSuite

コンバータ

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

EMI Filtering and Signal Conditioning

品名 概要
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
品名
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter

MEMS and Sensors

品名 概要
H3LIS331DL Low power High-g 3-axis accelerometer, SPI/I2C digital output MEMS motion sensor, user-selectable full scales of ±100g/±200g/±400g
I3G4250D 3-axis gyroscope for industrial applications, digital output, extended operating temperature range
ISM330DLC iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications
品名
Low power High-g 3-axis accelerometer, SPI/I2C digital output MEMS motion sensor, user-selectable full scales of ±100g/±200g/±400g
3-axis gyroscope for industrial applications, digital output, extended operating temperature range
iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications

Motor Drivers

品名 概要
STSPIN32F0 Advanced BLDC controller with embedded STM32 MCU
STSPIN32F0A Advanced BLDC controller with embedded STM32 MCU
品名
Advanced BLDC controller with embedded STM32 MCU
Advanced BLDC controller with embedded STM32 MCU

パワー・マネージメント

品名 概要
L6491 High voltage high and low-side 4 A gate driver
L6498 High voltage high and low-side 2 A gate driver
L6985F 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
L6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
L7985 2A step-down switching regulator
L7986 3A step-down switching regulator
L7987 61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
L7987L 61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
ST1S14 Up to 3 A step down switching regulator
ST1S40 3A DC step-down switching regulator
ST1S41 4 A step-down switching regulator
品名
High voltage high and low-side 4 A gate driver
High voltage high and low-side 2 A gate driver
38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
2A step-down switching regulator
3A step-down switching regulator
61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
Up to 3 A step down switching regulator
3A DC step-down switching regulator
4 A step-down switching regulator

Power Transistors

品名 概要
STF18N65M5 N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
STF24N60M2 N-channel 600 V, 0.168 Ohm typ., 18 A MDmesh M2 Power MOSFET in TO-220FP package
STF33N60M2 N-channel 600 V, 0.108 Ohm typ., 26 A MDmesh M2 Power MOSFETs in TO-220FP package
STF34N65M5 N-channel 650 V, 0.09 Ohm typ., 28 A MDmesh M5 Power MOSFET in TO-220FP package
STF7N105K5 N-channel 1050 V, 1.4 Ohm typ., 4 A MDmesh K5 Power MOSFETs in TO-220FP package
STF7N90K5 N-channel 900 V, 0.72 Ohm typ., 7 A MDmesh K5 Power MOSFET in a TO-220FP package
STF8N90K5 N-channel 900 V, 0.60 Ohm typ., 8 A MDmesh K5 Power MOSFET in a TO-220FP package
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL19N60M2 N-channel 600 V, 0.278 Ohm typ., 11 A MDmesh M2 Power MOSFET in a PowerFLAT 8x8 HV package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STW69N65M5 N-channel 650 V, 0.037 Ohm typ., 58 A MDmesh M5 Power MOSFET in TO-247 package
品名
N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
N-channel 600 V, 0.168 Ohm typ., 18 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.108 Ohm typ., 26 A MDmesh M2 Power MOSFETs in TO-220FP package
N-channel 650 V, 0.09 Ohm typ., 28 A MDmesh M5 Power MOSFET in TO-220FP package
N-channel 1050 V, 1.4 Ohm typ., 4 A MDmesh K5 Power MOSFETs in TO-220FP package
N-channel 900 V, 0.72 Ohm typ., 7 A MDmesh K5 Power MOSFET in a TO-220FP package
N-channel 900 V, 0.60 Ohm typ., 8 A MDmesh K5 Power MOSFET in a TO-220FP package
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 600 V, 0.278 Ohm typ., 11 A MDmesh M2 Power MOSFET in a PowerFLAT 8x8 HV package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 650 V, 0.037 Ohm typ., 58 A MDmesh M5 Power MOSFET in TO-247 package

ワイヤレス・トランシーバ / マイコン / モジュール

品名 概要
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
S2-LP Ultra-low power, high performance, sub-1GHz transceiver
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
SPIRIT1 Low data rate, low power Sub 1GHz transceiver
SPSGRF Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
STS1TX Low data rate, low power sub-1GHz transmitter
品名
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Ultra-low power, high performance, sub-1GHz transceiver
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1
Low data rate, low power Sub 1GHz transceiver
Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
Low data rate, low power sub-1GHz transmitter