概要
ソリューション
HW評価ツール
リソース
Tools and Software
主要製品
Get Started

LEDランプ/電球は、レトロフィット電球、ハイベイ照明、非常用照明など、アプリケーション固有の用途、規模、寸法に応じてさまざまな形状のものがあります。LEDストリングの駆動では、(非絶縁型、絶縁型、1段または多段トポロジで設計された)AC-DC/DC-DC変換を利用して、高い効率と信頼性を競争力のある価格帯で実現する必要があります。

STは、各種のパルス幅変調(PWM)コントローラ、力率補正(PFC)コントローラ、パワーMOSFET、ダイオード、幅広いハードウェア評価および開発ツール(リファレンス設計を含む)の提供により、高効率のLED照明ソリューションの設計をサポートしています。

推奨製品

製品型番
概要
STEVAL-VP26K01B 15 V / 100 mA high voltage buck converter reference design based on VIPER26K Quick view

主な特徴

  • Ultra-wide range: 90–600 VAC or 60–870 VDC
  • Frequency: 50-60 Hz
  • Output voltage: 15 V
  • Output current: 100 mA
  • Very compact size
  • Tight line and load regulation over the entire input and output range
  • Meets IEC55022 Class B conducted EMI even with a reduced EMI filter, thanks to the frequency jittering feature
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVALHVLED805 HVLED805 based evaluation board: 4.2 W isolated LED driver with primary side current regulation Quick view

主な特徴

  • Input voltage range (VIN ): 185 - 265 VAC
  • Main frequency (fL ): 50 - 60 Hz
  • Maximum (rated) output power: 4.2 W
  • Output: IOUT = 350 mA ± 5%
    • Over voltage = 12 V max
    • Current ripple < 10% IOUT
  • Minimum switching frequency in normal mode: 70 kHz
  • Target average efficiency (from 1 to 3 LEDs) > 70 %
  • Maximum input power in no-load < 100 mW

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL037V1 3.2 W LED power supply based on HVLED805 Quick view

主な特徴

  • Input voltage: 90 Vac - 265 Vac
  • Input frequency: 50 Hz - 60 Hz
  • Output power: 3.2 W
  • Expected efficiency: 85%
  • Output voltage: ~16 Vdc (from 3 to 5 LEDs)
  • Output current: 200 mA
  • For E26/E27/GU10 LED lamps
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL043V1 High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings Quick view

主な特徴

  • Mains voltage range VACmin = 165Vac , VACmax = 277 Vac
  • Minimum mains frequency fl = 47 Hz
  • DC output voltage Vout = 65 V
  • Maximum output current Iout = 1.5 A
  • Maximum 2fL output ripple ΔVO% = 1.0%
  • Minimum switching frequency fswmin = 40 KHz
  • Expected efficiency: 90%
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA125V1 5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L Quick view

主な特徴

  • Input voltage range: 90 VRMS - 265 VRMS
  • Output voltage: 5 V
  • Max output current: IOUT max = 2 A
  • Peak output current: IOUT pk = 3 A
  • Precision of output regulation: ΔVOUT_LF ±5%
  • High frequency output voltage ripple: ΔVOUT_HF = 50 mV
  • Max ambient operating temperature: TA = 60 ºC
  • 800 V avalanche-rugged power section
  • PWM operation at 60 kHz with frequency jittering for lower EMI
  • Limiting current with adjustable set point
  • On-board soft-start
  • Safe auto-restart after a fault condition; low standby power (< 50 mW at 265 Vac ).
  • Adjustable, accurate overvoltage protection, thermal shutdown with hysteresis, delayed overload protection

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVLHVLED815W10F HVLED815 based evaluation board: 10 W wide range high power factor isolated LED driver with primary side current regulation Quick view

主な特徴

  • 10 W LED driver
  • Wide-range input (88 - 265 VAC)
  • Isolated solution
  • Single stage HPF flyback
  • Primary side regulation - no optocoupler
  • Power factor > 0.95
  • LED driver efficiency > 84%
  • THD < 20%

さらに表示

EVLHVLED815W15 HVLED815 based evaluation board: 15 W European range high power factor LED driver with primary side current regulation Quick view

主な特徴

  • 15 W LED driver
  • Single stage HPF flyback
  • Primary side regulation - no optocoupler
  • Power factor > 0.95
  • LED driver efficiency > 84%
  • THD < 20%
  • European input range

さらに表示

STEVAL-ISA142V1 50 W wide-range high power factor flyback converter using the L6564 Quick view

主な特徴

  • Line voltage range: 90 to 265 VAC
  • Minimum line frequency (fl): 47-63 Hz
  • Minimum switching frequency: 44 KHz
  • Reflected voltage: 140 V
  • Regulated output voltage: 24 V
  • Rated output power: 50 W
  • Power factor (load ≥ 50%): 0.9 minimum
  • Minimum efficiency at full load: 88%
  • Maximum 2 fl output voltage ripple: 1.1 V pk-pk (VIN =230 VAC , Pout =50 W)
  • Maximum ambient temperature: 50 °C
  • Conducted EMI: in accordance with EN55022 class-B
  • PCB type and size: single-sided, 35 um, CEM-1, 140 x 60 mm
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
32F3348DISCOVERY Discovery kit with STM32F334C8 MCU Quick view

主な特徴

  • STM32F334C8T6 microcontroller featuring 64 KB of Flash memory, 16 KB RAM in an LQFP48 package.
  • On-board ST-LINK/V2-1 with selection mode switch to use the kit as a standalone ST-LINK/V2-1 (with SWD connector for programming and debugging).
  • mbed -enabled (mbed.org)
  • USB ST-LINK with re-enumeration capability and three different interfaces:
    • virtual com port
    • mass storage
    • debug port
  • Board power supply: through USB bus or from an external 5 V supply voltage.
  • External application power supply: 3 V and 5 V.
  • High brightness LED dimming with buck converter.
  • One buck / boost converter.
  • Six LEDs:
    • LD1 (red) for 3.3 V power on
    • LD2 (red/green) for USB communication
    • Four user LEDs: LD3 (red), LD4 (orange), LD5 (green) and LD6 (blue).
  • Two pushbuttons (user and reset).
  • Extension header for LQFP48 I/Os for a quick connection to the prototyping board and easy probing.
  • Comprehensive free software including a variety of examples, part of STM32CubeF3 package or STSW-STM32148 for legacy Standard Library usage.

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA162V1 12 V/10 W isolated flyback converter based on VIPer25HD Quick view

主な特徴

  • Universal input mains range: 90 – 265 VAC , frequency: 50 – 60 Hz
  • Output voltage: 12 V/0.84 A
  • Very compact size
  • Quasi resonant operation
  • Standby mains consumption: < 35 mW at 230 VAC
  • Average efficiency: > 82% (compliant with CoC version 5, Tier 2)
  • EMI: in accordance with EN55022-Class-B

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL075V1 STLUX385A evaluation board Quick view

主な特徴

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL074V2 60 W wide input range flyback converter using HVLED001A controller in FOT mode Quick view

主な特徴

  • Input voltage: Vin = 90 - 277 Vrms , f = 45-66 Hz
  • Output voltage: 52 V / 1.2 A
  • High power factor, low THD
  • Full load efficiency: above 90%
  • Short circuit protection
  • Safety: compliant with EN60065
  • PCB board: 165 mm x 50 mm double-sided PCB
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL082V1 Smart home lighting based on HVLED815PF and SPSGRF Quick view

主な特徴

  • LED driver features:
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open circuit and short-circuit LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • Sub-GHz connectivity features:
    • Works with the bundled STEVAL-ILL082V1_remote controller based on SP1ML-868 sub-GHz module
    • Allows remote lamp powering on and off
    • Allows lamp remote dimming
    • Standby power consumption: < 0.5 W
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL083V1 Smart home lighting based on HVLED815PF and SPBTLE-RF Quick view

主な特徴

  • LED driver main features
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open/short LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • BLE connectivity main features
    • Works with Android App - Smart Home Lighting
    • Allows lamp remote power-on / power-off
    • Allows lamp remote dimming
  • Standby power consumption: <0.5 W
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL069V2 35 W wide input range flyback converter using HVLED001A quasi resonant flyback controller and STF10LN80K5 Quick view

主な特徴

  • Input voltage: Vin: 90 - 305 Vrms, f: 45 - 66 Hz
  • Output voltage: 48 V / 730 mA
  • High power factor, low THD
  • No-load: better than 250 mW @ 230 Vin
  • Full load efficiency: 90%
  • Short circuit protection with auto restart
  • Safety: accordance with EN60065
  • PCB board: 130 mm x 50 mm single side PCB
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA180V1 12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P Quick view

主な特徴

  • Universal AC main input voltage range: 85 to 265 VAC
  • Output range: 12 V - 0.6 A
  • Rated output power: 7.2 W
  • Input power in standby @ 230 VAC : less than 18 mW
  • Active mode efficiency: > 80%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL085V1 Wide input and wide output voltage LED driver with high power factor and low THD based on HVLED001A Quick view

主な特徴

  • AC input voltage range: 90 V to 300 V
  • LED voltage / current: 60 V-105 V / 700 mA
  • Constant LED current: 700 mA ± 2%
  • Power factor: > 0.95
  • Input current THD: < 10%
  • Standby consumption: < 0.5 W
  • Open-circuit and short-circuit protection
  • Provision for smart features: ON / OFF / DIMMING
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL070V4 35 W dimmable single string LED driver using HVLED001A and STF10LN80K5 Quick view

主な特徴

  • Input voltage: VIN = 90 - 305 Vrms , f: 45 - 66 Hz
  • Output current: 700 mA (VLED = 24 V to 48 V)
  • Dimming: 100% to 10%
  • Dimming interfaces: 0 - 10 V and PWM input
  • High power factor, low THD
  • Efficiency: > 90% @ full load
  • Open load voltage limiting (52.4 V)
  • Optional remote turn-off input
  • Optional 3.3 V – 0.1 A voltage regulator
  • Fast VOUT discharge
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics Gerber
STEVAL-ILL080V1 18 W tube replacement zero ripple LED driver using HVLED001A quasi resonant flyback controller and STF10LN80K5 Quick view

主な特徴

  • Input voltage: Vin = 180 - 264 Vrms, f = 45 - 66 Hz
  • Output current: 200 mA
  • 100 Hz output current ripple: < 1%
  • LED string voltage: 83 V ±10%
  • No load output voltage: 110 V
  • High power factor, low THD
  • No-load: better than 300 mW at 230 Vin
  • Full load efficiency: > 85 %
  • Short circuit protection with auto restart
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL076V2 18 W wide input range ultra slim flyback converter using HVLED001A quasi resonant flyback controller and STD8N80K5 Quick view

主な特徴

  • Input voltage: Vin: 90 – 264 Vrms, f: 45 – 66 Hz
  • Output power:
    • 18 W at wide input range
    • 40 W at European input range
  • Output voltage: 56 V ±5 %
  • High power factor, low THD
  • No-load: better than 400 mW at 230 Vin
  • Full load efficiency: greater than 92 %
  • Short circuit protection with auto restart
  • EMI: pre-compliant with EN55022 (B) limits
  • Safety: complies with EN60950
  • Dimensions: 183 mm x 28 mm x 17 mm
  • PCB: single sided, 35 µm, FR4, mixed PTH/SMD
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL066V2 100 W LED street lighting evaluation board using the STLUX385A digital controller Quick view

主な特徴

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-LLL004V1 75 W digitally controlled constant current LED driver reference design Quick view

主な特徴

  • Wide input voltage range 85 – 265 VAC
  • Transition Mode PFC
  • Two constant current outputs working in transition mode based on different topologies:
    • Buck topology
    • Inverse buck topology
  • Output current: 500 mA ±2.5%
    • Number of LEDs connected at output: 16 – 24 white LEDs (3.3 V each)
  • PFC > 0.97 and THD < 20% at full load with input voltage 85-265 VAC
  • Peak Efficiency at maximum load ≅ 90%
  • Comprehensive safety protections:
    • Open/no-load circuit protection
    • Short-/overload circuit protection
  • Soft start implementation
  • LED dimming range: 0.5% to 100%
    • Analog dimming
    • Digital dimming
  • Dimming control options:
    • Push button
    • 0-10 V input
  • Meets EN55022 Class B
  • WEEE and RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVALSTDRIVE601 EVALSTRIVE601 - Demonstration board for STDRIVE601 triple gate driver Quick view

主な特徴

  • High voltage rail up to 600V
  • Driver supply input voltage range 9V-20V
  • STGD6M65DF2 IGBTs power stage featuring:
    • V(BR)CES = 650 V
    • VCE(sat) = 1.55 V @ IC = 6 A
  • Dual footprint for IGBT/MOSFET package:
    • DPAK
    • PowerFlat 8x8
  • Selectable single or 3-shunt current sensing topology:
    • Sensored or sensorless BEMF detection
    • FOC or 6-Step algorithm
  • SmartShutdown overcurrent protection
  • Hall effect sensors connector
  • Bus voltage sensing
  • 450V bulk capacitor
  • Connector for interfacing with MCU
  • RoHS compliant

さらに表示

画像

Image
Image
STEVAL-ILL013V1 80 W offline PFC and LED driver demonstration board with dimming based on the L6562A Quick view

主な特徴

  • EN55015 and EN61000-3-2 compliant
  • EMI filter implemented
  • Non-isolated SMPS
  • Universal PWM input for dimming (external board required)
  • 80 W LED driver
  • High efficiency (~90%)
  • 350 mA, 700 mA and 1 A LED current settings
  • High power factor: 0.982 for 230 V/50 Hz AC
  • Brightness regulation between 0 and 100%
  • Wide input voltage range: 88 V to 265 VAC

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVL6562A-35WFLB 35W WIDE RANGE HIGH POWER FACTOR FLYBACK CONVERTER USING THE L6562A
製品型番
STEVAL-VP26K01B

15 V / 100 mA high voltage buck converter reference design based on VIPER26K

主な特徴

  • Ultra-wide range: 90–600 VAC or 60–870 VDC
  • Frequency: 50-60 Hz
  • Output voltage: 15 V
  • Output current: 100 mA
  • Very compact size
  • Tight line and load regulation over the entire input and output range
  • Meets IEC55022 Class B conducted EMI even with a reduced EMI filter, thanks to the frequency jittering feature
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVALHVLED805

HVLED805 based evaluation board: 4.2 W isolated LED driver with primary side current regulation

主な特徴

  • Input voltage range (VIN ): 185 - 265 VAC
  • Main frequency (fL ): 50 - 60 Hz
  • Maximum (rated) output power: 4.2 W
  • Output: IOUT = 350 mA ± 5%
    • Over voltage = 12 V max
    • Current ripple < 10% IOUT
  • Minimum switching frequency in normal mode: 70 kHz
  • Target average efficiency (from 1 to 3 LEDs) > 70 %
  • Maximum input power in no-load < 100 mW

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL037V1

3.2 W LED power supply based on HVLED805

主な特徴

  • Input voltage: 90 Vac - 265 Vac
  • Input frequency: 50 Hz - 60 Hz
  • Output power: 3.2 W
  • Expected efficiency: 85%
  • Output voltage: ~16 Vdc (from 3 to 5 LEDs)
  • Output current: 200 mA
  • For E26/E27/GU10 LED lamps
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL043V1

High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings

主な特徴

  • Mains voltage range VACmin = 165Vac , VACmax = 277 Vac
  • Minimum mains frequency fl = 47 Hz
  • DC output voltage Vout = 65 V
  • Maximum output current Iout = 1.5 A
  • Maximum 2fL output ripple ΔVO% = 1.0%
  • Minimum switching frequency fswmin = 40 KHz
  • Expected efficiency: 90%
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA125V1

5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L

主な特徴

  • Input voltage range: 90 VRMS - 265 VRMS
  • Output voltage: 5 V
  • Max output current: IOUT max = 2 A
  • Peak output current: IOUT pk = 3 A
  • Precision of output regulation: ΔVOUT_LF ±5%
  • High frequency output voltage ripple: ΔVOUT_HF = 50 mV
  • Max ambient operating temperature: TA = 60 ºC
  • 800 V avalanche-rugged power section
  • PWM operation at 60 kHz with frequency jittering for lower EMI
  • Limiting current with adjustable set point
  • On-board soft-start
  • Safe auto-restart after a fault condition; low standby power (< 50 mW at 265 Vac ).
  • Adjustable, accurate overvoltage protection, thermal shutdown with hysteresis, delayed overload protection

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVLHVLED815W10F

HVLED815 based evaluation board: 10 W wide range high power factor isolated LED driver with primary side current regulation

主な特徴

  • 10 W LED driver
  • Wide-range input (88 - 265 VAC)
  • Isolated solution
  • Single stage HPF flyback
  • Primary side regulation - no optocoupler
  • Power factor > 0.95
  • LED driver efficiency > 84%
  • THD < 20%

さらに表示

EVLHVLED815W15

HVLED815 based evaluation board: 15 W European range high power factor LED driver with primary side current regulation

主な特徴

  • 15 W LED driver
  • Single stage HPF flyback
  • Primary side regulation - no optocoupler
  • Power factor > 0.95
  • LED driver efficiency > 84%
  • THD < 20%
  • European input range

さらに表示

STEVAL-ISA142V1

50 W wide-range high power factor flyback converter using the L6564

主な特徴

  • Line voltage range: 90 to 265 VAC
  • Minimum line frequency (fl): 47-63 Hz
  • Minimum switching frequency: 44 KHz
  • Reflected voltage: 140 V
  • Regulated output voltage: 24 V
  • Rated output power: 50 W
  • Power factor (load ≥ 50%): 0.9 minimum
  • Minimum efficiency at full load: 88%
  • Maximum 2 fl output voltage ripple: 1.1 V pk-pk (VIN =230 VAC , Pout =50 W)
  • Maximum ambient temperature: 50 °C
  • Conducted EMI: in accordance with EN55022 class-B
  • PCB type and size: single-sided, 35 um, CEM-1, 140 x 60 mm
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
32F3348DISCOVERY

Discovery kit with STM32F334C8 MCU

主な特徴

  • STM32F334C8T6 microcontroller featuring 64 KB of Flash memory, 16 KB RAM in an LQFP48 package.
  • On-board ST-LINK/V2-1 with selection mode switch to use the kit as a standalone ST-LINK/V2-1 (with SWD connector for programming and debugging).
  • mbed -enabled (mbed.org)
  • USB ST-LINK with re-enumeration capability and three different interfaces:
    • virtual com port
    • mass storage
    • debug port
  • Board power supply: through USB bus or from an external 5 V supply voltage.
  • External application power supply: 3 V and 5 V.
  • High brightness LED dimming with buck converter.
  • One buck / boost converter.
  • Six LEDs:
    • LD1 (red) for 3.3 V power on
    • LD2 (red/green) for USB communication
    • Four user LEDs: LD3 (red), LD4 (orange), LD5 (green) and LD6 (blue).
  • Two pushbuttons (user and reset).
  • Extension header for LQFP48 I/Os for a quick connection to the prototyping board and easy probing.
  • Comprehensive free software including a variety of examples, part of STM32CubeF3 package or STSW-STM32148 for legacy Standard Library usage.

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA162V1

12 V/10 W isolated flyback converter based on VIPer25HD

主な特徴

  • Universal input mains range: 90 – 265 VAC , frequency: 50 – 60 Hz
  • Output voltage: 12 V/0.84 A
  • Very compact size
  • Quasi resonant operation
  • Standby mains consumption: < 35 mW at 230 VAC
  • Average efficiency: > 82% (compliant with CoC version 5, Tier 2)
  • EMI: in accordance with EN55022-Class-B

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL075V1

STLUX385A evaluation board

主な特徴

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL074V2

60 W wide input range flyback converter using HVLED001A controller in FOT mode

主な特徴

  • Input voltage: Vin = 90 - 277 Vrms , f = 45-66 Hz
  • Output voltage: 52 V / 1.2 A
  • High power factor, low THD
  • Full load efficiency: above 90%
  • Short circuit protection
  • Safety: compliant with EN60065
  • PCB board: 165 mm x 50 mm double-sided PCB
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL082V1

Smart home lighting based on HVLED815PF and SPSGRF

主な特徴

  • LED driver features:
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open circuit and short-circuit LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • Sub-GHz connectivity features:
    • Works with the bundled STEVAL-ILL082V1_remote controller based on SP1ML-868 sub-GHz module
    • Allows remote lamp powering on and off
    • Allows lamp remote dimming
    • Standby power consumption: < 0.5 W
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL083V1

Smart home lighting based on HVLED815PF and SPBTLE-RF

主な特徴

  • LED driver main features
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open/short LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • BLE connectivity main features
    • Works with Android App - Smart Home Lighting
    • Allows lamp remote power-on / power-off
    • Allows lamp remote dimming
  • Standby power consumption: <0.5 W
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL069V2

35 W wide input range flyback converter using HVLED001A quasi resonant flyback controller and STF10LN80K5

主な特徴

  • Input voltage: Vin: 90 - 305 Vrms, f: 45 - 66 Hz
  • Output voltage: 48 V / 730 mA
  • High power factor, low THD
  • No-load: better than 250 mW @ 230 Vin
  • Full load efficiency: 90%
  • Short circuit protection with auto restart
  • Safety: accordance with EN60065
  • PCB board: 130 mm x 50 mm single side PCB
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISA180V1

12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P

主な特徴

  • Universal AC main input voltage range: 85 to 265 VAC
  • Output range: 12 V - 0.6 A
  • Rated output power: 7.2 W
  • Input power in standby @ 230 VAC : less than 18 mW
  • Active mode efficiency: > 80%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL085V1

Wide input and wide output voltage LED driver with high power factor and low THD based on HVLED001A

主な特徴

  • AC input voltage range: 90 V to 300 V
  • LED voltage / current: 60 V-105 V / 700 mA
  • Constant LED current: 700 mA ± 2%
  • Power factor: > 0.95
  • Input current THD: < 10%
  • Standby consumption: < 0.5 W
  • Open-circuit and short-circuit protection
  • Provision for smart features: ON / OFF / DIMMING
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL070V4

35 W dimmable single string LED driver using HVLED001A and STF10LN80K5

主な特徴

  • Input voltage: VIN = 90 - 305 Vrms , f: 45 - 66 Hz
  • Output current: 700 mA (VLED = 24 V to 48 V)
  • Dimming: 100% to 10%
  • Dimming interfaces: 0 - 10 V and PWM input
  • High power factor, low THD
  • Efficiency: > 90% @ full load
  • Open load voltage limiting (52.4 V)
  • Optional remote turn-off input
  • Optional 3.3 V – 0.1 A voltage regulator
  • Fast VOUT discharge
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics Gerber
STEVAL-ILL080V1

18 W tube replacement zero ripple LED driver using HVLED001A quasi resonant flyback controller and STF10LN80K5

主な特徴

  • Input voltage: Vin = 180 - 264 Vrms, f = 45 - 66 Hz
  • Output current: 200 mA
  • 100 Hz output current ripple: < 1%
  • LED string voltage: 83 V ±10%
  • No load output voltage: 110 V
  • High power factor, low THD
  • No-load: better than 300 mW at 230 Vin
  • Full load efficiency: > 85 %
  • Short circuit protection with auto restart
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL076V2

18 W wide input range ultra slim flyback converter using HVLED001A quasi resonant flyback controller and STD8N80K5

主な特徴

  • Input voltage: Vin: 90 – 264 Vrms, f: 45 – 66 Hz
  • Output power:
    • 18 W at wide input range
    • 40 W at European input range
  • Output voltage: 56 V ±5 %
  • High power factor, low THD
  • No-load: better than 400 mW at 230 Vin
  • Full load efficiency: greater than 92 %
  • Short circuit protection with auto restart
  • EMI: pre-compliant with EN55022 (B) limits
  • Safety: complies with EN60950
  • Dimensions: 183 mm x 28 mm x 17 mm
  • PCB: single sided, 35 µm, FR4, mixed PTH/SMD
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ILL066V2

100 W LED street lighting evaluation board using the STLUX385A digital controller

主な特徴

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-LLL004V1

75 W digitally controlled constant current LED driver reference design

主な特徴

  • Wide input voltage range 85 – 265 VAC
  • Transition Mode PFC
  • Two constant current outputs working in transition mode based on different topologies:
    • Buck topology
    • Inverse buck topology
  • Output current: 500 mA ±2.5%
    • Number of LEDs connected at output: 16 – 24 white LEDs (3.3 V each)
  • PFC > 0.97 and THD < 20% at full load with input voltage 85-265 VAC
  • Peak Efficiency at maximum load ≅ 90%
  • Comprehensive safety protections:
    • Open/no-load circuit protection
    • Short-/overload circuit protection
  • Soft start implementation
  • LED dimming range: 0.5% to 100%
    • Analog dimming
    • Digital dimming
  • Dimming control options:
    • Push button
    • 0-10 V input
  • Meets EN55022 Class B
  • WEEE and RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVALSTDRIVE601

EVALSTRIVE601 - Demonstration board for STDRIVE601 triple gate driver

主な特徴

  • High voltage rail up to 600V
  • Driver supply input voltage range 9V-20V
  • STGD6M65DF2 IGBTs power stage featuring:
    • V(BR)CES = 650 V
    • VCE(sat) = 1.55 V @ IC = 6 A
  • Dual footprint for IGBT/MOSFET package:
    • DPAK
    • PowerFlat 8x8
  • Selectable single or 3-shunt current sensing topology:
    • Sensored or sensorless BEMF detection
    • FOC or 6-Step algorithm
  • SmartShutdown overcurrent protection
  • Hall effect sensors connector
  • Bus voltage sensing
  • 450V bulk capacitor
  • Connector for interfacing with MCU
  • RoHS compliant

さらに表示

画像

Image
Image
STEVAL-ILL013V1

80 W offline PFC and LED driver demonstration board with dimming based on the L6562A

主な特徴

  • EN55015 and EN61000-3-2 compliant
  • EMI filter implemented
  • Non-isolated SMPS
  • Universal PWM input for dimming (external board required)
  • 80 W LED driver
  • High efficiency (~90%)
  • 350 mA, 700 mA and 1 A LED current settings
  • High power factor: 0.982 for 230 V/50 Hz AC
  • Brightness regulation between 0 and 100%
  • Wide input voltage range: 88 V to 265 VAC

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVL6562A-35WFLB

35W WIDE RANGE HIGH POWER FACTOR FLYBACK CONVERTER USING THE L6562A

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4461
      100 W LED street lighting application using STLUX385A
      4.0
      1.81 MB
      PDF
      AN2711
      120 VAC input-Triac dimmable LED driver based on the L6562A
      3.3
      1.28 MB
      PDF
      AN3360
      3.2 W LED power supply based on HVLED805
      2.2
      2.8 MB
      PDF
      AN5316
      35 W wide input range flyback converter using HVLED001B quasi resonant Flyback controller and STF10LN80K5
      1.0
      2.8 MB
      PDF
      AN2838
      35 W wide-range high power factor flyback converter evaluation board using the L6562A
      2.0
      1.32 MB
      PDF
      AN5335
      35W transition-mode flyback converter with ultra-low THD based on HVLED007
      1.1
      3.36 MB
      PDF
      AN3106
      48 V - 130 W high-efficiency converter with PFC for LED street lighting applications
      3.1
      1.17 MB
      PDF
      AN1768
      ADMISSIBLE AVALANCHE POWER OF SCHOTTKY DIODES
      1.1
      46.82 KB
      PDF
      AN2644
      An introduction to LLC resonant half-bridge converter
      2.0
      1.27 MB
      PDF
      AN4607
      Basics on the thyristor (SCR) structure and its application
      2.0
      317.41 KB
      PDF
      AN4656
      Bootloading procedure for STLUX™ and STNRG™ digital controllers
      2.0
      635.41 KB
      PDF
      AN2983
      Constant current inverse buck LED driver using L6562A
      1.3
      1.9 MB
      PDF
      AN5351
      EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications
      1.0
      6.21 MB
      PDF
      AN3286
      EVLVIPER25L-10WSB: 5 V/10 W, quasi-resonant isolated flyback
      1.0
      1.44 MB
      PDF
      AN4250
      Fishbone diagram for power factor correction
      1.1
      772.32 KB
      PDF
      AN4539
      HRTIM cookbook
      3.0
      1.17 MB
      PDF
      AN4932
      HVLED001A - enhanced QR high power factor flyback controller for LED drivers
      2.0
      3.01 MB
      PDF
      AN4885
      High brightness LED dimming using the STM32F334 Discovery kit
      1.1
      594.69 KB
      PDF
      AN5119
      How to design an application from draft with STNRG011
      1.0
      343.37 KB
      PDF
      AN4496
      How to get a high power factor with the HVLED815PF device
      1.0
      365.44 KB
      PDF
      AN4608
      How to select the right thyristor (SCR) for your application
      1.0
      895.7 KB
      PDF
      AN4606
      Inrush-current limiter circuits (ICL) with Triacs and Thyristors (SCR) and controlled bridge design tips
      2.2
      1,008.92 KB
      PDF
      AN2450
      LLC resonant half-bridge converter design guideline
      6.0
      746.74 KB
      PDF
      AN4406
      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies
      1.0
      652.78 KB
      PDF
      AN3168
      Non-insulated SCR / Triac control circuits
      1.2
      315.8 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN4674
      SRK2001 adaptive synchronous rectification controller for LLC resonant converter evaluation board family
      2.0
      963.78 KB
      PDF
      AN3424
      STEVAL-ILL042V1: high power factor flyback LED driver based on the L6562A and TSM101
      1.1
      2.24 MB
      PDF
      AN303
      Thyristors and TRIACs: latching current
      3.4
      164.96 KB
      PDF
      AN4461

      100 W LED street lighting application using STLUX385A

      AN2711

      120 VAC input-Triac dimmable LED driver based on the L6562A

      AN3360

      3.2 W LED power supply based on HVLED805

      AN5316

      35 W wide input range flyback converter using HVLED001B quasi resonant Flyback controller and STF10LN80K5

      AN2838

      35 W wide-range high power factor flyback converter evaluation board using the L6562A

      AN5335

      35W transition-mode flyback converter with ultra-low THD based on HVLED007

      AN3106

      48 V - 130 W high-efficiency converter with PFC for LED street lighting applications

      AN1768

      ADMISSIBLE AVALANCHE POWER OF SCHOTTKY DIODES

      AN2644

      An introduction to LLC resonant half-bridge converter

      AN4607

      Basics on the thyristor (SCR) structure and its application

      AN4656

      Bootloading procedure for STLUX™ and STNRG™ digital controllers

      AN2983

      Constant current inverse buck LED driver using L6562A

      AN5351

      EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications

      AN3286

      EVLVIPER25L-10WSB: 5 V/10 W, quasi-resonant isolated flyback

      AN4250

      Fishbone diagram for power factor correction

      AN4539

      HRTIM cookbook

      AN4932

      HVLED001A - enhanced QR high power factor flyback controller for LED drivers

      AN4885

      High brightness LED dimming using the STM32F334 Discovery kit

      AN5119

      How to design an application from draft with STNRG011

      AN4496

      How to get a high power factor with the HVLED815PF device

      AN4608

      How to select the right thyristor (SCR) for your application

      AN4606

      Inrush-current limiter circuits (ICL) with Triacs and Thyristors (SCR) and controlled bridge design tips

      AN2450

      LLC resonant half-bridge converter design guideline

      AN4406

      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies

      AN3168

      Non-insulated SCR / Triac control circuits

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN4674

      SRK2001 adaptive synchronous rectification controller for LLC resonant converter evaluation board family

      AN3424

      STEVAL-ILL042V1: high power factor flyback LED driver based on the L6562A and TSM101

      AN303

      Thyristors and TRIACs: latching current

    • 概要 バージョン サイズ アクション
      UM1736
      Getting started with STM32F334 discovery kit software development tools
      1.1
      2.18 MB
      PDF
      UM1735
      Discovery kit for STM32F3 series with STM32F334C8 MCU
      2.0
      1.61 MB
      PDF
      UM1733
      Getting started with STM32F334 Discovery kit
      1.1
      351.28 KB
      PDF
      UM1736

      Getting started with STM32F334 discovery kit software development tools

      UM1735

      Discovery kit for STM32F3 series with STM32F334C8 MCU

      UM1733

      Getting started with STM32F334 Discovery kit

    • 概要 バージョン サイズ アクション
      DN0039
      35 W wide input range flyback converter using HVLED001A quasi resonant Flyback controller and STF10LN80K5
      1.1
      1 MB
      PDF
      DN0028
      STEVAL-ILL066V1 - 90Vac-305Vac input
      1.0
      583.39 KB
      PDF
      DN0039

      35 W wide input range flyback converter using HVLED001A quasi resonant Flyback controller and STF10LN80K5

      DN0028

      STEVAL-ILL066V1 - 90Vac-305Vac input

関連資料

    • 概要 バージョン サイズ アクション
      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series 1.0
      351.54 KB
      PDF
      HVLED: Lighting the future 12.2018
      700.32 KB
      PDF
      LED drivers for automotive applications 1.0
      707.5 KB
      PDF
      STLUX385A 100 W LED street lighting 1.0
      2.02 MB
      PDF
      STLUX: Intelligent lighting made easy 07.2017
      280.46 KB
      PDF

      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series

      HVLED: Lighting the future

      LED drivers for automotive applications

      STLUX385A 100 W LED street lighting

      STLUX: Intelligent lighting made easy

開発ツール・ハードウェア

ソフトウェア製品

    • 製品型番

      Graphical user interface for the STEVAL-PCC020V1 USB to I²C/UART interface board for STNRG011

eDesignSuite

LEDドライバ

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

カスタムLED

V This option is required.
A This option is required.
Ω This option is required.

LEDs

This option is required. And must be a whole positive number between 1 and 20.
This option is required. And must be a whole positive number between 1 and 20.

アンプ & コンパレータ

品名 概要
TS3011 Rail-to-rail high-speed comparator
TS3021 Rail-to-rail 1.8 V high-speed comparator
TS507 High precision single supply rail to rail op-amp
品名
Rail-to-rail high-speed comparator
Rail-to-rail 1.8 V high-speed comparator
High precision single supply rail to rail op-amp

Diodes and Rectifiers

品名 概要
FERD40M45C 45 V, 40 A dual Field-Effect Rectifier (FERD)
FERD40U45C 45 V, 40 A dual Ultra-Low Vf Field-Effect Rectifier Diode (FERD)
FERD60M45C 45 V, 60 A dual Field-Effect Rectifier Diode (FERD)
FERD60U45C 45 V, 60 A dual ultra low Vf Field-Effect Rectifier Diode (FERD)
STPS10170C 170 V, 10 A dual Power Schottky Rectifier
STPS1170 170 V, 1 A Power Schottky rectifier
STPS16170C 170 V, 16 A dual Power Schottky Rectifier
STPS200170TV1 170 V, 200 A dual Power Schottky Rectifier
STPS20170C 170 V, 20 A dual Power Schottky Rectifier
STPS20200C 200 V, 20 A dual Power Schottky diode
STPS20LCD200C 200 V, 20 A dual Power Schottky Rectifier
STPS2170 170 V, 2 A Power Schottky rectifier
STPS30170C 170 V, 30 A dual TO-220 Power Schottky Rectifier
STPS30170DJF 170 V, 30 A PowerFlat Power Schottky rectifier
STPS3170 170 V, 3 A Power Schottky Rectifier
STPS40170C 170 V, 40 A dual Power Schottky Rectifier
STPS60170C 170 V, 60 A dual Power Schottky Rectifier
STPS60SM200C 200 V, 60 A dual Low Leakage Power Schottky Rectifier
STPS61170C 170 V, 60 A dual Low Drop Power Schottky Rectifier
STPS80170C 170 V, 80 A dual Power Schottky Rectifier
STPS8170DEE 170 V, 8 A PowerFLAT Power Schottky Rectifier
品名
45 V, 40 A dual Field-Effect Rectifier (FERD)
45 V, 40 A dual Ultra-Low Vf Field-Effect Rectifier Diode (FERD)
45 V, 60 A dual Field-Effect Rectifier Diode (FERD)
45 V, 60 A dual ultra low Vf Field-Effect Rectifier Diode (FERD)
170 V, 10 A dual Power Schottky Rectifier
170 V, 1 A Power Schottky rectifier
170 V, 16 A dual Power Schottky Rectifier
170 V, 200 A dual Power Schottky Rectifier
170 V, 20 A dual Power Schottky Rectifier
200 V, 20 A dual Power Schottky diode
200 V, 20 A dual Power Schottky Rectifier
170 V, 2 A Power Schottky rectifier
170 V, 30 A dual TO-220 Power Schottky Rectifier
170 V, 30 A PowerFlat Power Schottky rectifier
170 V, 3 A Power Schottky Rectifier
170 V, 40 A dual Power Schottky Rectifier
170 V, 60 A dual Power Schottky Rectifier
200 V, 60 A dual Low Leakage Power Schottky Rectifier
170 V, 60 A dual Low Drop Power Schottky Rectifier
170 V, 80 A dual Power Schottky Rectifier
170 V, 8 A PowerFLAT Power Schottky Rectifier

パワー・マネージメント

品名 概要
HVLED001A Offline controller for LED lighting with constant voltage primary-sensing and high power factor
HVLED001B High power factor flyback controller with constant voltage primary sensing and ultra low standby consumption
HVLED002 High performance current mode LED controller
HVLED805 Off-line LED driver with primary-sensing up to 5W
HVLED815PF Off-line LED driver with primary-sensing and high power factor up to 15W
L6562A Transition-mode PFC controller BCD technology
L6562AT Transition-mode PFC controller
L6563 Advanced transition-mode PFC controller
L6563H High voltage start-up transition-mode PFC
L6563S Enhanced transition-mode PFC controller
L6564 10 pin transition-mode PFC controller
L6564H High voltage start-up transition-mode PFC
L6564T 10 pin transition-mode PFC controller for outdoor applications
L6599A Improved high-voltage resonant controller
L6599AF Ultra-extreme temperature range improved high voltage resonant controller
L6599AT IMPROVED HIGH-VOLTAGE RESONANT CONTROLLER
L6699 Enhanced high-voltage resonant controller
STCMB1 TM PFC with X-cap discharge and LLC resonant combo controller
STLUX285A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX325A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX385A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STNRG011 Digital combo multi-mode PFC and time-shift LLC resonant controller
VIPER01 VIPerPlus family: Low voltage energy saving fixed frequency high voltage converter
VIPER01B Energy saving off-line high voltage converter
VIPER06 VIPerPlus family: Energy saving high voltage converter for direct feedback
VIPER0P VIPerPlus family: Zero-power off-line high voltage converter
VIPER11 Energy saving off-line high voltage converter
VIPER16 VIPerPlus family: Energy saving 6W high voltage converter with direct feedback
VIPER17 VIPerPlus family: Fixed frequency 6W high performance off line high voltage converter
VIPER25 VIPerPlus family: Quasi-resonant high performance off line high voltage converter
VIPER26 VIPerPlus family: Energy saving 12W high voltage converter with direct feedback
VIPER27 VIPerPlus family: Fixed frequency 12W high performance off line high voltage converter
VIPER28 VIPerPlus family: Peak power fixed frequency off line high voltage converter
VIPER35 VIPerPlus family: Quasi-resonant high performance off line high voltage converter
VIPER37 VIPerPlus family: Fixed frequency 15W high performance off line high voltage converter
VIPER38 VIPerPlus family: Peak power fixed frequency high voltage converter
品名
Offline controller for LED lighting with constant voltage primary-sensing and high power factor
High power factor flyback controller with constant voltage primary sensing and ultra low standby consumption
High performance current mode LED controller
Off-line LED driver with primary-sensing up to 5W
Off-line LED driver with primary-sensing and high power factor up to 15W
Transition-mode PFC controller BCD technology
Transition-mode PFC controller
Advanced transition-mode PFC controller
High voltage start-up transition-mode PFC
Enhanced transition-mode PFC controller
10 pin transition-mode PFC controller
High voltage start-up transition-mode PFC
10 pin transition-mode PFC controller for outdoor applications
Improved high-voltage resonant controller
Ultra-extreme temperature range improved high voltage resonant controller
IMPROVED HIGH-VOLTAGE RESONANT CONTROLLER
Enhanced high-voltage resonant controller
TM PFC with X-cap discharge and LLC resonant combo controller
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital combo multi-mode PFC and time-shift LLC resonant controller
VIPerPlus family: Low voltage energy saving fixed frequency high voltage converter
Energy saving off-line high voltage converter
VIPerPlus family: Energy saving high voltage converter for direct feedback
VIPerPlus family: Zero-power off-line high voltage converter
Energy saving off-line high voltage converter
VIPerPlus family: Energy saving 6W high voltage converter with direct feedback
VIPerPlus family: Fixed frequency 6W high performance off line high voltage converter
VIPerPlus family: Quasi-resonant high performance off line high voltage converter
VIPerPlus family: Energy saving 12W high voltage converter with direct feedback
VIPerPlus family: Fixed frequency 12W high performance off line high voltage converter
VIPerPlus family: Peak power fixed frequency off line high voltage converter
VIPerPlus family: Quasi-resonant high performance off line high voltage converter
VIPerPlus family: Fixed frequency 15W high performance off line high voltage converter
VIPerPlus family: Peak power fixed frequency high voltage converter

Power Transistors

品名 概要
STD25N10F7 N-channel 100 V, 0.027 Ohm typ., 25 A, STripFET F7 Power MOSFET in DPAK package
STF13N60M2 N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
STF15N65M5 N-channel 650 V, 0.308 Ohm typ., 11 A MDmesh M5 Power MOSFET in TO-220FP package
STF16N60M2 N-channel 600 V, 0.28 Ohm typ., 12 A MDmesh M2 Power MOSFET in TO-220FP package
STF18N60M2 N-channel 600 V, 0.255 Ohm typ., 13 A MDmesh M2 Power MOSFET in TO-220FP package
STF18N65M5 N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
品名
N-channel 100 V, 0.027 Ohm typ., 25 A, STripFET F7 Power MOSFET in DPAK package
N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 650 V, 0.308 Ohm typ., 11 A MDmesh M5 Power MOSFET in TO-220FP package
N-channel 600 V, 0.28 Ohm typ., 12 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.255 Ohm typ., 13 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package

Thyristors (SCR) and AC Switches

品名 概要
TN1205H High temperature 12 A SCRs
TN1205T-600 12 A 600 V DPAK standard SCRs
TN1215 12A standard SCRs
TN1515-600B 15 A 600 V standard SCR Thyristor in DPAK
TN1605H-6G High Temperature 16A SCRs
TN2010H-6G High Temperature 20A SCRs
TN815 8A standard SCRs
品名
High temperature 12 A SCRs
12 A 600 V DPAK standard SCRs
12A standard SCRs
15 A 600 V standard SCR Thyristor in DPAK
High Temperature 16A SCRs
High Temperature 20A SCRs
8A standard SCRs
サポート & フィードバック