概要
ツール & ソフトウェア
リソース
ソリューション
品質 & 信頼性
Sales Briefcase
eDesignSuite
Get Started
サンプル & 購入
Partner products
  • FP-CLD-WATSON1 is an STM32Cube function pack. It can connect an IoT node based on the STM32L4 Discovery kit IoT node (B-L475E-IOT01A) or the NUCLEO-F429ZI to IBM Watson IoT, transmit sensor data and receive commands from remote applications.

    This package lets you jump-start end-to-end IoT development so that you can focus on adding desired functions.
    The software includes a middleware package implementing the MQTT protocol to facilitate interaction between the featured boards and Cloud services.
    The package is further extended with pre-integrated algorithms for the processing of accelerometer data which can be used to detect vibration from devices such as motors, fans and pumps. Maximum frequencies and tear/wear conditions of the device under test are reported together with raw sensor data to IBM Watson IoT thus enabling and speeding up development of solutions for industrial condition monitoring and predictive maintenance.
    IBM Watson IoT parameter configuration is greatly simplified thanks to the use of NFC. The software runs on the STM32 microcontroller and includes drivers for the featured sensor devices and dynamic NFC/RFID tag.

    主な特徴

    • Complete middleware to build applications based on Wi-Fi/Ethernet connectivity, inertial and environmental sensors, and to connect an STM32 Nucleo-144 development board with STM32F429ZI MCU, or an STM32L4 Discovery kit IoT node (B-L475E-IOT01A) to IBM Watson IoT Cloud
    • Software interface to access temperature and humidity sensor (HTS221), pressure sensor (LPS25HB), motion sensors (LIS3MDL, LSM303AGR, LSM6DSL) and to write and read the RFID/NFC tag (ST25DV04K)
    • Integrated mbedTLS and MQTT protocol middleware
    • Integrated Fast Fourier Transform (FFT) algorithm for vibration analysis
    • Sample implementation based on Wi-Fi connectivity available for STM32L4 Discovery kit IoT node (B-L475E-IOT01A), based on Ethernet connectivity available for X-NUCLEO-IKS01A2, and X-NUCLEO-NFC04A1, when both connected to a NUCLEO-F429ZI
    • Easy access to IBM Watson IoT Cloud services for sensor data visualization and processing (refer to http://www.ibm.com/internet-of-things/trial/ for details on license terms)
    • Easy portability across different MCU families, thanks to STM32Cube
    • Free, user-friendly license terms

ソフトウェア入手

推奨コンテンツ

開発環境

    • 製品型番

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

      Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

評価ツール

    • 製品型番

      STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

      STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      DB3159
      STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud
      2.0
      214.09 KB
      PDF
      DB3159

      STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud

    • 概要 バージョン サイズ アクション
      UM2130
      Getting started with the STM32Cube function pack for IoT node with Ethernet/Wi-Fi, NFC and sensors for vibration analysis connected with IBM Watson IoT Cloud
      2.0
      1.83 MB
      PDF
      UM2130

      Getting started with the STM32Cube function pack for IoT node with Ethernet/Wi-Fi, NFC and sensors for vibration analysis connected with IBM Watson IoT Cloud

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      FP-CLD-WATSON1 Quick start guide 2.4
      3.26 MB
      PDF
      STM32 and STM8 embedded software solutions 7.0
      3.12 MB
      PDF

      FP-CLD-WATSON1 Quick start guide

      STM32 and STM8 embedded software solutions

法務

    • 概要 バージョン サイズ アクション
      SLA0055
      SOFTWARE LICENSE AGREEMENT ("Agreement")
      4.23
      122.05 KB
      PDF
      SLA0055

      SOFTWARE LICENSE AGREEMENT ("Agreement")

    • The following complete (HW+SW) solution based on STM32 ODE directly connects your IoT node to the IBM Watson IoT cloud, transmits sensor data and receives commands from cloud applications. This package lets you jump-startend-to-end IoT development so that you can focus on developing and integrating your sensor-to-cloud functions. The boards (hardware) can be ordered separately or all together as a kit (using a single order code).
      Solution Components
      製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      P-NUCLEO-CLD1

      Key features

      • NUCLEO-F401RE: STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino UNO R3 and ST morpho connectivity
      • X-NUCLEO-IDW01M1: Wi-Fi expansion board based on SWPF01SA module
      • X-NUCLEO-IKS01A2: Motion MEMS and environmental sensor expansion board
      • X-NUCLEO-NFC01A1: Dynamic NFC tag expansion board based on M24SR
      • Out-of-the-box software support to connect the device to the IBM Watson IoT cloud or to the Microsoft Azure IoT cloud, by using one of the following package:
        • FP-CLD-AZURE1: STM32 ODE function pack for IoT node with Wi-Fi, NFC and sensors, connected to Microsoft Azure IoT cloud
        • FP-CLD-WATSON1: STM32 ODE function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud
      • RoHS compliant

      続きを読む

      IMAGE

      P-NUCLEO-CLD1
      P-NUCLEO-CLD1
      STM32Nucleo pack for IoT node with Wi-Fi, sensors and NFC connected to the cloud
      NRND
      63.70 購入
      NUCLEO-F401RE

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity
      Active
      STM32F401RE 12.74 購入
      X-NUCLEO-IDW01M1

      Key features

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo
      NRND
      SPWF01SA 22.05 購入
      X-NUCLEO-IKS01A2

      Key features

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      続きを読む

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo
      Active
      LSM6DSL; LSM303AGR; LPS22HB; HTS221 18.38 購入
      X-NUCLEO-NFC01A1

      Key features

      • M24SR64-Y Dynamic NFC/RFID tag IC
      • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Powered through the Arduino UNO R3 connectors
      • 3 color LEDs for general purpose

      続きを読む

      Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo
      Active
      M24SR 9.19 購入
      FP-CLD-WATSON1

      Key features

      • Complete middleware to build applications based on Wi-Fi/Ethernet connectivity, inertial and environmental sensors, and to connect an STM32 Nucleo-144 development board with STM32F429ZI MCU, or an STM32L4 Discovery kit IoT node (B-L475E-IOT01A) to IBM Watson IoT Cloud
      • Software interface to access temperature and humidity sensor (HTS221), pressure sensor (LPS25HB), motion sensors (LIS3MDL, LSM303AGR, LSM6DSL) and to write and read the RFID/NFC tag (ST25DV04K)
      • Integrated mbedTLS and MQTT protocol middleware
      • Integrated Fast Fourier Transform (FFT) algorithm for vibration analysis
      • Sample implementation based on Wi-Fi connectivity available for STM32L4 Discovery kit IoT node (B-L475E-IOT01A), based on Ethernet connectivity available for X-NUCLEO-IKS01A2, and X-NUCLEO-NFC04A1, when both connected to a NUCLEO-F429ZI
      • Easy access to IBM Watson IoT Cloud services for sensor data visualization and processing (refer to http://www.ibm.com/internet-of-things/trial/ for details on license terms)
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-CLD-WATSON1
      FP-CLD-WATSON1
      STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud
      Active
      -
      ソフトウェア
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-CLD-WATSON1 STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud 3.0.1 ST -
      P-NUCLEO-CLD1

      説明 :

      STM32Nucleo pack for IoT node with Wi-Fi, sensors and NFC connected to the cloud

      Price (US$)*

      63.70

      Key features

      • NUCLEO-F401RE: STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino UNO R3 and ST morpho connectivity
      • X-NUCLEO-IDW01M1: Wi-Fi expansion board based on SWPF01SA module
      • X-NUCLEO-IKS01A2: Motion MEMS and environmental sensor expansion board
      • X-NUCLEO-NFC01A1: Dynamic NFC tag expansion board based on M24SR
      • Out-of-the-box software support to connect the device to the IBM Watson IoT cloud or to the Microsoft Azure IoT cloud, by using one of the following package:
        • FP-CLD-AZURE1: STM32 ODE function pack for IoT node with Wi-Fi, NFC and sensors, connected to Microsoft Azure IoT cloud
        • FP-CLD-WATSON1: STM32 ODE function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud
      • RoHS compliant

      続きを読む

      IMAGE

      P-NUCLEO-CLD1
      P-NUCLEO-CLD1
      NUCLEO-F401RE

      説明 :

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity

      Price (US$)*

      12.74

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      X-NUCLEO-IDW01M1

      説明 :

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo

      Price (US$)*

      22.05

      Key features

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      X-NUCLEO-IKS01A2

      説明 :

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

      Price (US$)*

      18.38

      Key features

      • LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
      • LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
      • LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
      • HTS221: capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
      • I²C sensor hub features on LSM6DSL available
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • RoHS compliant

      続きを読む

      X-NUCLEO-NFC01A1

      説明 :

      Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

      Price (US$)*

      9.19

      Key features

      • M24SR64-Y Dynamic NFC/RFID tag IC
      • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connector
      • Powered through the Arduino UNO R3 connectors
      • 3 color LEDs for general purpose

      続きを読む

      FP-CLD-WATSON1

      説明 :

      STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Complete middleware to build applications based on Wi-Fi/Ethernet connectivity, inertial and environmental sensors, and to connect an STM32 Nucleo-144 development board with STM32F429ZI MCU, or an STM32L4 Discovery kit IoT node (B-L475E-IOT01A) to IBM Watson IoT Cloud
      • Software interface to access temperature and humidity sensor (HTS221), pressure sensor (LPS25HB), motion sensors (LIS3MDL, LSM303AGR, LSM6DSL) and to write and read the RFID/NFC tag (ST25DV04K)
      • Integrated mbedTLS and MQTT protocol middleware
      • Integrated Fast Fourier Transform (FFT) algorithm for vibration analysis
      • Sample implementation based on Wi-Fi connectivity available for STM32L4 Discovery kit IoT node (B-L475E-IOT01A), based on Ethernet connectivity available for X-NUCLEO-IKS01A2, and X-NUCLEO-NFC04A1, when both connected to a NUCLEO-F429ZI
      • Easy access to IBM Watson IoT Cloud services for sensor data visualization and processing (refer to http://www.ibm.com/internet-of-things/trial/ for details on license terms)
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-CLD-WATSON1
      FP-CLD-WATSON1
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-CLD-WATSON1 STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud 3.0.1 ST -