STSW-IME008
|
1.0.0
|
Active
|
ST
|
x
Please note, that cookies should be enabled for successful downloading the software.
x
サーバへのリクエストに失敗しました。しばらくしてから再度お試しください
my.st.comのアカウントをお持ちの場合は、ログイン後、認証手続きをせずにソフトウェアをダウンロードしていただけます。
ログインを希望されない場合でも、お名前とメールアドレスを下のフォームに入力し、確定していただくだけで、ソフトウェアをダウンロードすることが可能です。
これにより、STはお客様への継続的な情報提供が可能となり、本ソフトウェアの更新についてお知らせすることができます。
さらにダウンロードを続ける場合、多くのソフトウェアについては、この手順をもう一度行う必要はありません。
To validate your e-mail and start the download, please click on the link inside the e-mail that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the e-mail.
x
IMPORTANT-READ CAREFULLY:This Production Limited License Agreement ("PLLA") for ST
materials is made between you on behalf of yourself or on behalf of any entity by which you
are employed or engaged (collectively referred to in this PLLA as "You" or “Licensee”) and
STMicroelectronics International NV, a company incorporated under the laws of the Netherlands
acting for the purpose of this PLLA through its Swiss branch located at 39, Chemin du Champ
des Filles, 1228 Plan-les-Ouates, Geneva, Switzerland (hereinafter “ST”). Affiliates shall
mean any corporation, partnership, or other entity that, directly or indirectly, owns, is
owned by, or is under common ownership with ST, for so long as such ownership exists. For the
purposes of the foregoing, "own", "owned," or "ownership" shall mean ownership of more than
fifty percent (50%) of the stock or other equity interests entitled to vote for the election
of directors or an equivalent governing body.The ST materials licensed under this PLLA shall mean the
software made available by ST and/or its Affiliates upon agreeing to this PLLA, including any
associated Documentation (collectively the “Licensed Materials”). Documentation shall mean and
include any comments, annotations, instructions, manuals, and other materials, whether in
printed or electronic form, including without limitation installation manuals, user’s guides,
and programmer guides, related to any software made available under this PLLA. The Licensed
Materials include any software updates, and supplements that ST and/or its Affiliates may
provide You or make available to You after the date You obtain the Licensed Materials to the
extent that such items are not accompanied by a separate license agreement or other terms of
use.THE LICENSED MATERIALS ARE LICENSED TO YOU ON THE CONDITION
THAT YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS PLLA. BY CLICKING ON THE "I ACCEPT"
BUTTON OR BY INSTALLING, COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THE LICENSED
MATERIALS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS PLLA. IF YOU DO NOT AGREE WITH ANY
CONDITION OF THIS PLLA, DO NOT INSTALL, ACCESS OR USE THE LICENSED MATERIALS. 1.
LIMITED LICENSESubject to the terms and conditions of this PLLA and applicable Open
Source Terms (as defined hereafter) and during the term of this PLLA, ST hereby grants You
under intellectual property rights owned by ST and its Affiliates or under which ST and its
Affiliates has the right to grant a license, a worldwide, non-exclusive, non-transferable,
royalty-free license, without the right to sub-license (except as expressly stipulated herein
or authorized in writing by an authorized representative of ST):(i) to use, reproduce and modify (to the extent delivered to
You in source code) the Licensed Materials for the sole purpose of and to the extent necessary
to create a software or hardware application (“Licensee Product”) embedding the Licensed
Materials, provided always that the Licensed Materials execute solely and exclusively on, or
in conjunction with an integrated circuit manufactured by or for ST or its Affiliates (“ST
Product”);(ii) to distribute the Licensed Materials to third parties in
the same code form only as delivered to You by ST and only as embedded in the Licensee Product
(and not as a standalone product) provided always that the Licensed Materials execute solely
and exclusively on, or in conjunction with ST Product and grant such third parties sublicenses
of the rights granted to You in subsections 1 (i) and (ii). You will enter into an agreement
with such third parties which limit use of the Licensed Materials to no more than is allowed
for under this PLLA. Upon request, You shall provide ST with requested contact information of
third parties to whom you distributed the Licensed Materials and confirm in writing that such
agreements with such third parties are in place.(iii) to use the Documentation solely to support and exercise
the rights granted under this article 1 and to copy, modify and/or create derivative works
from the Documentation, but only for the purpose of creating technically accurate subsets and
supersets thereof or by translating it into other languages or otherwise creating technically
accurate localized versions thereof – and distributing such Documentation and modifications
and/or derivative works only with Licensee Product.Subject to all limitations described herein, You are
authorized to have third party contractors exercise for You and on your behalf the license
rights as set forth above. You are fully responsible vis-à-vis ST for any act or omission of
Your contractors and any breach by Your contractors shall be deemed a breach by You
hereunder.You acknowledge that the Licensed Materials have not been
specifically designed to meet your individual requirements and that You have all information
necessary to evaluate whether the Licensed Materials meet your requirements or not, and will
be suitable for your intended use or application. Therefore the Licensed Materials shall be
deemed accepted upon delivery to Licensee. You shall use, at your own risk, the Licensed
Materials. You acknowledge that ST and its Affiliates cannot in any way be held responsible
for the consequences resulting from use of the Licensed Materials and any development made
following such use of the Licensed Materials. Notwithstanding anything to the contrary herein,
You are not authorized to sublicense to or have used the Licensed Materials by a competitor of
ST.Licensed Materials are not specifically designed for use in
safety critical applications such as life supporting devices or systems, and nuclear,
automotive or aerospace applications or environments. ST and its Affiliates expressly disclaim
any responsibility for such usage which shall be made by You at your sole risk, even if ST and
its Affiliates have been informed You in writing of such usage. You acknowledge and agree to
be solely responsible for regulatory and safety related requirements concerning Licensee
Products and any claim arising from incorporation of the Licensed Materials in any application
or system where failure of the Licensed Materials could lead to death or personal
injury.
2. RESTRICTIONS AND ADDITIONAL OBLIGATIONS
Unless otherwise expressly stipulated under Article 1, You shall not,
and shall not permit any third party to: (i) copy, reproduce or duplicate the Licensed
Materials; (ii) translate, modify, adapt, decompile, disassemble or reverse engineer and
make derivative works of all or any portion of the Licensed Materials; (iii) rent, disclose,
publish, sell, assign, lease, lend, sublicense, market, transfer, distribute or otherwise
provide third parties access to (any portion of) the Licensed Materials for any purpose;
(iv) attempt to derive the source code, algorithmic nature or structure of any object code
portions of the Licensed Materials; (v) use the Licensed Materials to create any product
that competes with the Licensed Materials or ST Products; (vi) remove or circumvent any
protection or other restrictive technology mechanism of the Licensed Materials or ST
Products; (vii) disclose the results of the Licensed Materials’ performance benchmarks to
any third party; or (viii) otherwise use (any portion of) the Licensed Materials in any
manner not expressly authorized by this PLLA.
Other than the limited expressed license granted to You under Article 1
herein, no other rights or licenses are granted, or implied by estoppel or otherwise, under
any intellectual property rights of ST and/or its Affiliates or any intellectual property of
a third-party residing in the Licensed Materials or any other confidential information
furnished by ST and its Affiliates, including (i) for the combination of such Licensed
Materials or other confidential information with one or more other items (including items
acquired from ST and/or its Affiliates) even if such items have no substantial use other
than as part of such combination (ii) with respect to any trademark, trade or brand name, a
corporate name of ST and/or its Affiliates, or any other name or mark, or contraction
abbreviation or simulation thereof, (iii) under any intellectual property rights covering
any standard set by a standard setting body and any de facto standards.
ST and its Affiliates have no obligation to provide You with
maintenance, support or updates for the Licensed Materials. Nothing in this PLLA will be
construed as: (i) a warranty or representation by ST and its Affiliates to maintain
production of any ST software or ST Product with which the Licensed Materials may be used in
any manner; and (ii) a commitment from ST and its Affiliates to bring or prosecute actions
against third-parties for infringement.
You shall limit access and use of the Licensed Materials to You and
those individuals who may be employed by You who have a need to access the Licensed
Materials for the purpose of this PLLA and provided that You shall ensure that such
individuals shall comply with the provisions of this PLLA, and except as expressly permitted
under Article 1 or as otherwise expressly agreed in writing by ST, You shall not allow any
third-party to use the Licensed Materials, You shall be liable towards ST for any damages
due to a failure by such third-party(ies) to comply with the provisions of this PLLA.
3. OWNERSHIP, COPYRIGHTS AND TRADEMARKS
The Licensed Materials are and will remain the exclusive property of ST
and/or its Affiliates or its licensors, whether or not specifically recognized or perfected
under the laws of the country where the Licensed Materials are used. You will not take any
action that jeopardizes ST and its Affiliates or its licensors' proprietary rights or
acquire any rights in the Licensed Materials, except the limited rights specified in Article
1.
All rights, titles, and interests in and to the Licensed Materials are
owned or licensed by ST, its Affiliates and suppliers. You shall ensure that all notices,
including but not limited to all copyright and trademark notices of ST or its Affiliates or
licensors are reproduced in any copy of the whole or any part of the Licensed Materials. You
shall not remove, modify or alter any ST or its Affiliates’ or licensors’ copyright or
trademark notice from any part of the Licensed Materials.
4. CONFIDENTIALITY
Confidential information shall include all information provided with the Licensed Materials
which (a) is designated as “confidential”, “proprietary” or with a similar legend, (b) is by
its own nature of a type which would reasonably be considered confidential and/or (c) is
source code (“Confidential Information”). You may only use the Confidential Information for
the purpose of this PLLA and shall protect the confidentiality of the Confidential
Information provided by ST and its Affiliates under this PLLA by using the same degree of
care, but not less than a reasonable degree of care, to prevent its unauthorized use,
dissemination, or publication as You use to protect your own confidential information of
like nature.
You shall be liable towards ST for any damages incurred due to a failure by any employee,
third party contractor or customer having access to the Licensed Materials and/or the
Confidential Information to comply with the provisions in this PLLA. You shall immediately
notify ST of any unauthorised use or disclosure of, or of any unauthorised access to, or of
any theft or loss of the Licensed Materials or Confidential Information or part thereof,
which comes to your notice.
The confidentiality obligations shall not apply to Confidential Information, which can be
shown by documentary evidence: (i) entered the public domain through no fault of the
Licensee; or, (ii) was known to the Licensee prior to receipt from ST and its Affiliates;
or, (iii) was disclosed to the Licensee by a third party having the right to disclose; or,
(iv) was independently developed by the Licensee without use of the Licensed Materials or
the Confidential Information, the onus of proof of independence being on the Licensee.
These confidentiality obligations shall survive any termination or expiration of the PLLA
for whatever cause.
5. DISCLAIMER OF WARRANTY
YOU ACKNOWLEDGE THAT THE LICENSED MATERIALS AND ANY AND ALL PARTS THEREOF ARE PROVIDED “AS
IS”. ST AND ITS AFFILIATE MAKE NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE LICENSED
MATERIALS AND OR PARTS THEREOF WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SPECIFICALLY, WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, ST AND ITS AFFILIATES MAKE
NO REPRESENTATION OR WARRANTY THAT (I) THE USE AND DISTRIBUTION OF THE LICENSED MATERIALS
AND OR PARTS THEREOF WILL BE UNINTERRUPTED OR ERROR FREE, AND OR (II) ANY USE AND
DISTRIBUTION OF THE LICENSED MATERIALS AND OR PARTS THEREOF, WHETHER INTEGRATED INTO OTHER
EQUIPMENT OR NOT, ARE FREE FROM INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY
RIGHTS. IT SHALL BE YOUR SOLE RESPONSIBILITY TO MAKE SUCH DETERMINATION AS NECESSARY WITH
RESPECT TO THE ACQUISITION OF LICENSES UNDER PATENTS AND OTHER INTELLECTUAL PROPERTY RIGHTS
OF THIRD PARTIES. CONSEQUENTLY, ST AND ITS AFFILIATES DISCLAIM ANY LIABILITY IN CASE ANY
SUCH USE AND DISTRIBUTION INFRINGE ANY THIRD PARTY’S INTELLECTUAL PROPERTY RIGHTS.
FURTHERMORE ST AND ITS AFFILIATES HEREBY DISCLAIM ANY WARRANTY AND LIABILITY WHATSOEVER FOR
ANY DEVELOPMENT CREATED BY OR FOR YOU OR YOUR CUSTOMERS.
YOU ACKNOWLEDGE THAT YOU HAVE RELIED ON NO WARRANTIES AND THAT NO WARRANTIES ARE MADE BY ST
AND ITS AFFILIATES OR GRANTED BY LAW WHENEVER IT IS PERMITTED BY LAW.
6. OPEN SOURCE
Some portion of the Licensed Materials might contain Open Source
Software subject to Open Source Terms (as defined below) applicable for each such portion,
as further specified in the Licensed Materials. Such Open Source Software is supplied to You
under the applicable Open Source Terms and is not subject to the terms of this PLLA to the
extent the terms of this PLLA are in conflict with such applicable Open Source Terms.
Except for Open Source Software, You have no rights under this PLLA to,
and may not under any circumstances use the Licensed Materials or any parts thereof such
that they become subject to any Open Source Terms. These actions include but are not limited
to combining the Licensed Materials by means of incorporation or linking or otherwise.
For the purpose of this PLLA, “Open Source Terms” shall mean any open
source license which requires as part of distribution of software that the source code of
such software is distributed therewith, or open source license that complies with the Open
Source Definition specified at www.opensource.org and any other comparable open source
license such as for example GNU General Public License (GPL), Eclipse Public License (EPL),
Apache Software License, BSD license and MIT license. “Open Source Software” shall mean any
software that is licensed or distributed under Open Source Terms as specified in the
Licensed Materials.
7. COMPLIANCE
You agree not to use the Licensed Materials in violation of any
applicable law, statute, ordinance or other regulation or any obligation by which You are
bound. You agree to comply with all applicable laws and regulations affecting the use of the
Licensed Materials. Specifically but without limiting the generality of the foregoing, You
acknowledge that the Licensed Materials are subject to export controls restrictions and You
agree to comply with any applicable export control law or regulation including but not
limited to the European export regulations and US similar regulations, and to obtain any
necessary export license or other documentation prior to exportation or re-exportation of
the Licensed Materials.
Some Licensed Materials may (i) require licenses from third parties
claiming intellectual property rights covering use or implementation of the Licensed
Materials or (ii) be based on industry recognized standards or software programs published
by industry recognized standards bodies and certain third parties may claim to own
intellectual property rights that cover implementation or use of those standards. You agree
that You are responsible for obtaining any such license which may be needed, and no such
license is provided by ST or its Affiliates.
You shall be responsible for the due and proper compliance with the
terms and conditions of this PLLA by your customers and shall be liable to ST for any and
all damages incurred by ST, its Affiliates and its suppliers and licensors in connection
with any such customers’ non-compliance therewith.
8. DISCLAIMER OF DAMAGES
IN NO EVENT SHALL ST AND ITS AFFILIATES BE LIABLE TO THE LICENSEE AND
ITS CUSTOMERS FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST
PROFITS OR LOST SAVINGS, LOSS OF BARGAIN OR OPPORTUNITY, PROFESSIONAL FEES OR EXPENSES,
BUSINESS INTERRUPTION, LOST REVENUES OR SALES, DAMAGE TO PRODUCT OR EQUIPMENT OR TO
FACILITIES, COSTS OF SUBSTITUTE PRODUCT, FACILITIES OR SERVICES, REWORK CHARGES, COSTS
ASSOCIATED WITH DOWN TIME, LOSS OF GOODWILL, LOSS OF DATA OR FOR ANY DAMAGES COSTS OR
EXPENSES ASSOCIATED WITH WARRANTY OR INTELLECTUAL PROPERTY INFRINGEMENT CLAIMS, WHETHER
FORESEEABLE OR UNFORESEEABLE AND WHETHER OR NOT SUCH DAMAGES ARE BASED ON WARRANTY, CONTRACT
OR ANY OTHER LEGAL THEORY – EVEN IF LICENSEE HAS BEEN ADVISED, OR IS AWARE, OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM OR IN CONNECTION WITH THIS PLLA. ST AND ITS
AFFILIATES AGGREGATE AND CUMULATIVE LIABILITY UNDER THIS PLLA SHALL NOT EXCEED 100 USD (ONE
HUNDRED USD). THE LIMITATIONS SET FORTH IN THIS ARTICLE 8 SHALL ONLY APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW.
9. TERM AND TERMINATION
This PLLA shall be valid from acceptance by You of this PLLA for an
unlimited period of time until terminated by either ST or Licensee upon one (1) month prior
written notice to the other. Notwithstanding the foregoing, Licensee may terminate this PLLA
at any time by destroying all Licensed Materials, Documentation and other Confidential
Information or by returning those to ST. ST may terminate this PLLA at any time if (i) You
fail to comply with the terms and conditions of this PLLA, or (ii) You file litigation
against ST or its Affiliates, (iii) ST or its Affiliates receive notice of any claim, suit
or proceeding that alleges that the Licensed Materials or Your use or distribution of the
Licensed Materials infringes any third-party intellectual property rights or (iv) to the
extent permitted by laws, a voluntary or involuntary petition in bankruptcy or winding up is
filed against Licensee, any proceedings in insolvency or bankruptcy are instituted against
Licensee, a trustee or receiver is appointed over Licensee, or any assignment is made for
the benefit of creditors of Licensee. Upon termination You shall delete, destroy, or return
to ST all Licensed Materials in your possession and You shall stop using the Licensed
Materials for any purpose whatsoever. The rights and obligations under Articles from 2 to 11
will survive the termination of this PLLA. However the right to use the Licensed Materials
incorporated in a Licensee Product as per Article 1 will survive with respect to Licensee
Products sold, licensed or distributed before the termination of this PLLA.
10. MISCELLANEOUS
If a court or agency of competent jurisdiction holds any term of this
PLLA invalid, illegal, or unenforceable for any reason, the remainder of this PLLA shall be
valid and enforceable and You and ST shall discuss in good faith a substitute, valid,
enforceable provision which most nearly effects the parties intent in entering into this
PLLA.
The failure by ST to enforce any provisions of this PLLA or to exercise
any right in respect thereto shall not be construed as constituting a waiver of its rights
thereof.
No agency, joint venture, partnership or other business organisation
shall be created or be construed as being created by reason of this PLLA. You will not have
the right or authority to, and shall not, assume or create any obligation of any nature
whatsoever on behalf of ST and its Affiliates or bind ST and its Affiliates in any respect
whatsoever. You and ST are independent parties and nothing in this PLLA shall be construed
as making You an employee, agent or legal representative of ST.
This PLLA contains the entire and sole agreement between You and ST on
the subject matter of this PLLA, and supersedes all representations, undertakings and
agreements previously made between You and ST and/or its Affiliates and shall prevail over
the terms and conditions set forth in any document from You with respect to the subject
matter of this PLLA.
Any amendment to this PLLA shall be agreed in writing and duly signed by
You and ST or signed solely by You on the format proposed by ST and shall make reference to
this PLLA.
11. APPLICABLE LAW
This PLLA is governed by the laws of Switzerland, without regard to its
conflict of law rules. All disputes or questions arising out of or in connection with this
PLLA shall be finally settled by the competent courts of Geneva, Switzerland.
Notwithstanding the aforesaid, nothing in this PLLA shall prevent ST from seeking any
interim or final injunctive or equitable relief by a court of competent jurisdiction.
|