製品概要
概要
The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.
-
特徴
- Operating voltage 2.25 V to 3.6 V
- Operating temperature –40 °C to +125 °C
- Programmable
- 10 different conversion rates 0.0625 to 32 conversions/sec. 1 conversion/sec. - default
- 4 different resolutions 9-bit (0.5 °C/LSB) to12-bit (0.0625 °C/LSB) 10-bit (0.25 °C/LSB) - default
- Low supply current
- 50 μA (typ) for 8 conversions/sec.
- 20 μA (typ) for 1 conversion/sec.
- 3 μA (typ) standby
- Accuracy
- ±0.5 °C (typ) 0 °C to +85 °C
- ±0.5 °C (typ) –40 °C to +125 °C
- One-shot mode for power saving
- Fast conversion time 21 ms (typ) 10-bit
- Pull-up resistor value allows single pin to select one of four slave addresses
- Supports 400 kHz serial clock
- SMBus 2.0 compatible
- SMBus ALERT (ARA) support
- SMBus timeout
- RoHS/green
おすすめ製品
注目ビデオ
センサ技術とスマート・アプリケーションに対するSTの豊富な経験から生み出されたこのIoT端末開発キットは、パッケージから取り出すと、すぐに使うことができます。
推奨コンテンツ
All tools & software
すべてのリソース
タイトル | バージョン | 更新日 |
---|
製品スペック (1)
タイトル | バージョン | 更新日 | ||
---|---|---|---|---|
7.0 | 21 May 2019 | 21 May 2019 |
アプリケーションノート (2)
タイトル | バージョン | 更新日 | ||
---|---|---|---|---|
1.0 | 13 Sep 2018 | 13 Sep 2018 | ||
1.0 | 02 Apr 2020 | 02 Apr 2020 |
Design Notes & Tips (1)
タイトル | バージョン | 更新日 | ||
---|---|---|---|---|
1.0 | 10 Mar 2021 | 10 Mar 2021 |
フライヤ (1)
タイトル | バージョン | 更新日 | ||
---|---|---|---|---|
1.0 | 20 Oct 2023 | 20 Oct 2023 |
パンフレット (4)
タイトル | バージョン | 更新日 | ||
---|---|---|---|---|
1.3 | 02 Mar 2022 | 02 Mar 2022 | ||
1.1 | 30 Nov 2020 | 30 Nov 2020 | ||
01.21 | 26 May 2021 | 26 May 2021 | ||
2.0 | 16 Aug 2021 | 16 Aug 2021 |
EDAシンボル / フットプリント / 3Dモデル
品質 & 信頼性
製品型番 | マーケティング・ステータス | パッケージ | RoHSコンプライアンスグレード | 材料宣誓書** |
---|---|---|---|---|
STTS751-0DP3F | 量産中 | DFN6 2X2X0.5 | Ecopack2 | |
STTS751-1DP3F | 量産中 | DFN6 2X2X0.5 | Ecopack2 |
(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
サンプル & 購入
製品型番 | 製品ステータス | Budgetary Price (US$)*/Qty | STから購入 | Order from distributors | パッケージ | 梱包タイプ | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度(℃) | Operating Temperature (°C) (min) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
最小 | 最大 | |||||||||||||
STTS751-0DP3F | | | distributors 販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください | DFN6 2X2X0.5 | Tape and Reel | THAILAND | EAR99 | NEC | -40 | 125 | -40 | |||
STTS751-1DP3F | | | distributors 販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください | DFN6 2X2X0.5 | Tape and Reel | THAILAND | EAR99 | NEC | -40 | 125 | -40 |
STTS751-0DP3F 量産中
販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください
STTS751-1DP3F 量産中
販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください
(*)概算用の参考価格(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。