-
ARM® core with embedded Flash and RAM
The STR71x series is a family of ARM-powered 32-bit microcontrollers with embedded Flash and RAM. It combines the high performance ARM7TDMI CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STR71xF devices have on-chip high-speed single voltage FLASH memory and high-speed RAM. STR710R devices have high-speed RAM but no internal Flash. The STR71x family has an embedded ARM core and is therefore compatible with all ARM tools and software.
Extensive tools support
STMicroelectronics’ 32-bit, ARM core-based microcontrollers are supported by a complete range of high-end and low-cost development tools to meet the needs of application developers. This extensive line of hardware/software tools includes starter kits and complete development packages all tailored for ST’s ARM core-based MCUs. The range of development packages includes third-party solutions that come complete with a graphical development environment and an in-circuit emulator/programmer featuring a JTAG application interface. These support a range of embedded operating systems (OS), while several royalty-free OSs are also available.
For more information, please refer to ST MCU site http://www.st.com/mcu主な特徴
- Core
- ARM7TDMI 32-bit RISC CPU
- 59 MIPS @ 66 MHz from SRAM
- 45 MIPS @ 50 MHz from Flash
- Memories
- Up to 256 Kbytes Flash program memory (10 kcycles endurance, 20 years retention @ 85 ° C)
- 16 Kbytes Flash data memory (100 kcycles endurance, 20 years retention@ 85 ° C)
- Up to 64 Kbytes RAM
- External Memory Interface (EMI) for up to 4 banks of SRAM, Flash, ROM
- Multi-boot capability
- Clock, reset and supply management
- 3.0 to 3.6 V application supply and I/Os
- Internal 1.8 V regulator for core supply
- Clock input from 0 to 16.5 MHz
- Embedded RTC osc. running from external 32 kHz crystal
- Embedded PLL for CPU clock
- Realtime Clock for clock-calendar function
- 5 power saving modes: SLOW, WAIT, LPWAIT, STOP and STANDBY modes
- Nested interrupt controller
- Fast interrupt handling with multiple vectors
- 32 vectors with 16 IRQ priority levels
- 2 maskable FIQ sources
- Up to 48 I/O ports
- 30/32/48 multifunctional bidirectional I/OsUp to 14 ports with interrupt capability
- 5 timers
- 16-bit watchdog timer
- 3 16-bit timers with 2 input captures, 2 output compares, PWM and pulse counter
- 16-bit timer for timebase functions
- 10 communication interfaces
- 2 I2C interfaces (1 multiplexed with SPI)
- 4 UART asynchronous serial interfaces
- Smartcard ISO7816-3 interface on UART1
- 2 BSPI synchronous serial interfaces
- CAN interface (2.0B Active)
- USB Full Speed (12 Mbit/s) Device Function with Suspend and Resume
- HDLC synchronous communications
- 4-channel 12-bit A/D converter
- Sampling frequency up to 1 kHz
- Conversion range: 0 to 2.5 V
- Development tools support
- Atomic bit SET and RES operations
- Core
ダウンロード
サンプル & 購入
| 製品型番 | Marketing Status | 数量 | Budgetary Price (US$)* | パッケージ | Packing Type | Temperature (°C) | ECCN (US) | Country of Origin | More info | Order from Distributors | Order from ST | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小値 | max | |||||||||||
| STR710FZ1T6 |
NRND
|
10000 | - | LQFP 144 20x20x1.4 | Tray | -40 | 85 | 3A991A2 | MALTA | Check Availability | ||
| STR710FZ1H6 |
Active
|
10000 | - | LFBGA 144 10x10x1.7 | Tray | -40 | 85 | 3A991A2 | MALTA | No availability of distributors reported, please contact our sales office | ||
STR710FZ1T6
Marketing Status
NRND数量
10000Unit Price (US$)
*STR710FZ1H6
Marketing Status
アクティブ数量
10000Unit Price (US$)
*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
開発ツール･ハードウェア
-
-
写真 Part number 製造元 Description AI-JTAG/OPTO ST Opto-isolation board for galvanic isolation for use between applications and development tools using a 20-pin JTAG connection 製品型番Opto-isolation board for galvanic isolation for use between applications and development tools using a 20-pin JTAG connection
-
-
-
写真 Part number 製造元 Description MDK-ARM-STR Keil MDK-ARM software development environment for Cortex-R based MCUs RIDE-STR Raisonance Raisonance branded integrated development environment for ST7, STR7 and STR9 MCUs STSW-STR7050 ST STR7 Family Flash Programming Software 製品型番MDK-ARM software development environment for Cortex-R based MCUs
Raisonance branded integrated development environment for ST7, STR7 and STR9 MCUs
STR7 Family Flash Programming Software
-
ソフトウェア製品
-
-
写真 Part number 製造元 Description STSW-STR7013 ST STR71x Software Development Getting Started STSW-STR7014 ST Interrupt Handling for STR7 microcontroller STSW-STR7015 ST STR71x RTC Application Example STSW-STR7016 ST STR71x GPIO Driving Four 7-Segment Display STSW-STR7017 ST STR71x I2C Communication with M24Cxx EEPROM STSW-STR7018 ST STR71x UART Communication with a PC using RS232 STSW-STR7019 ST How to use the STR71x A/D converter and apply a conversion speed-up technique STSW-STR7020 ST STR71x GPIO Driving a 4x4 Matrix Keypad STSW-STR7021 ST STR71x BSPI Used as an UART STSW-STR7022 ST STR71x ADC Driving an Analog Keyboard STSW-STR7023 ST STR71x BSPI Communication with M25P10-A Serial Flash STSW-STR7024 ST STR71x Clock Configurations Easy Setup STSW-STR7025 ST EEPROM Emulation with STR71x STSW-STR7026 ST STR7 In-Application programming using UART STSW-STR7027 ST STR71x Microcontroller Power Management STSW-STR7028 ST Getting Started with uClinux for STR71x, all necessary information to start with uClinux for any STR71xF MCU STSW-STR7029 ST STR71xF Embedded Flash Programming with ARM Developer Suite (ADS) STSW-STR7031 ST TCP/IP Over Ethernet Connectivity with the STR710 STSW-STR7032 ST Smart Card Interface with the STR71xx STSW-STR7033 ST STR7/STR9 audio generation with PWM STSW-STR7034 ST RFID library for SR176 tag management with STR71x STSW-STR7036 ST Connecting I2S audio devices to the STR7/STR9 MCU STSW-STR7040 ST STR71x Firmware Library 製品型番STR71x Software Development Getting Started
Interrupt Handling for STR7 microcontroller
STR71x RTC Application Example
STR71x GPIO Driving Four 7-Segment Display
STR71x I2C Communication with M24Cxx EEPROM
STR71x UART Communication with a PC using RS232
How to use the STR71x A/D converter and apply a conversion speed-up technique
STR71x GPIO Driving a 4x4 Matrix Keypad
STR71x BSPI Used as an UART
STR71x ADC Driving an Analog Keyboard
STR71x BSPI Communication with M25P10-A Serial Flash
STR71x Clock Configurations Easy Setup
EEPROM Emulation with STR71x
STR7 In-Application programming using UART
STR71x Microcontroller Power Management
Getting Started with uClinux for STR71x, all necessary information to start with uClinux for any STR71xF MCU
STR71xF Embedded Flash Programming with ARM Developer Suite (ADS)
TCP/IP Over Ethernet Connectivity with the STR710
Smart Card Interface with the STR71xx
STR7/STR9 audio generation with PWM
RFID library for SR176 tag management with STR71x
Connecting I2S audio devices to the STR7/STR9 MCU
STR71x Firmware Library
-
| 製品型番 | Marketing Status | パッケージ | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| STR710FZ1H6 |
Active
|
LFBGA 144 10x10x1.7 | インダストリアル | Ecopack2 | |
| STR710FZ1T6 |
NRND
|
LQFP 144 20x20x1.4 | インダストリアル | Ecopack2 |
|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
