-
The STWBC-WA is STMicroelectronics’ wireless battery charger transmitter application optimized for wearable usage.
Thanks to its 5 V native supply, the STWBC-WA device is ideal to operate with USB power supplies.
Wireless battery charging systems replace the traditional power supply cable by means of electromagnetic induction between a transmitting pad or dongle (TX) and a battery-powered unit (RX), such as a smartwatch or sports gear.
The power transmitter unit is responsible for controlling the transmitting coil and generating the correct amount of power requested by the receiver unit. The receiver unit continuously provides the transmitter the correct power level requested, by modulating the transmitter carrier through controlled resistive or capacitive insertion. Generating the correct amount of power guarantees the highest level of end-to-end efficiency due to reduced energy waste. It also helps to maintain a lower operational temperature.
The digital wireless battery transmitter can adapt to the amount of energy transferred by the coil by modulating the frequency, duty cycles or coil input voltage.Key Features
- Digital controller for wireless battery charger transmitters
- Optimized for < 3 W applications
- Smartwatches and healthcare
- Internet of Things (IoT) battery-powered smart devices
- Remote controllers
- Cost effective half-bridge topology with integrated drivers
- Optional full-bridge configuration for 3 W applications
- VIN range: 3 V to 5.5 V
- Supports USB VIN
- Active presence detector
- Parametric customization via graphical interface
- 2 firmware options:
- Turnkey solution for quick design
- APIs available for application customization
- Peripherals available via APIs
- ADC, with 10-bit precision
- UART
- I2C master fast/slow speed rate
- GPIOs
- Memory
- Flash and EEPROM with read-while-write (RWW) and Error Correction Code (ECC)
- Program memory: 32 Kbytes Flash; data retention: 15 years at 85 °C after 10 kcycles at 25 °C
- Data memory: 1 Kbyte true data EEPROM; data retention: 15 years at 85 °C after 100 kcycles at 85 °C
- RAM: 6 Kbytes
- Transmitter reference design:
- Evaluation board order code: STEVAL-ISB038V1T
- 2-layer PCBs
- Active object detection
- Graphical user interface for application monitoring
- Interoperable with receiver: STEVAL-ISB038V1R
- Operating temperature
- -40 °C up to 105 °C
- パッケージ
- VFQFPN32
サンプル & 購入
| 製品型番 | 製品ステータス | パッケージ | グレード | ECCN (US) | 概算価格（USS） | 数量 | Country of Origin | Operating Temperature (°C) (max) | Operating Temperature (°C) (min) | Output Power (W) (typ) | More info | 販売代理店からオーダー | STからオーダー |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STWBC-WATR |
アクティブ
|
VFQFPN 32 5x5x1.0 | Industrial | 3A991A2 | 2.5125 | 1000 | PHILIPPINES | 105 | -40 | 2.5 | 販売代理店に在庫がない場合は、STのセールスオフィスまでお問い合わせください | ||
| STWBC-WA |
アクティブ
|
VFQFPN 32 5x5x1.0 | Industrial | 3A991A2 | 2.5125 | 1000 | PHILIPPINES | 105 | -40 | 2.5 | 在庫チェック |
STWBC-WATR
製品ステータス
アクティブパッケージ
VFQFPN 32 5x5x1.0Unit Price (US$)
2.5125*STWBC-WA
製品ステータス
アクティブパッケージ
VFQFPN 32 5x5x1.0Unit Price (US$)
2.5125*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
開発ツール･ハードウェア
ソフトウェア製品
-
-
写真 Part number 製造元 概要 
STSW-ISB045FW ST Firmware for the STEVAL-ISB045V1 wireless charger transmitter evaluation kit based on STWBC-WA 
STSW-STWBCFWDT ST STWBC firmware downloader tool 
STSW-STWBCGUI ST Graphical user interface for wireless power transmitter evaluation boards based on the STWBC chip family 製品型番Firmware for the STEVAL-ISB045V1 wireless charger transmitter evaluation kit based on STWBC-WA
STWBC firmware downloader tool
Graphical user interface for wireless power transmitter evaluation boards based on the STWBC chip family
-
評価ツール
-
-
写真 Part number 製造元 概要 
STEVAL-ISB045V1 ST 2.5 W wireless charger transmitter evaluation kit 製品型番2.5 W wireless charger transmitter evaluation kit
-
| 製品型番 | 製品ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | Material Declaration** |
|---|---|---|---|---|---|
| STWBC-WA |
アクティブ
|
VFQFPN 32 5x5x1.0 | インダストリアル | Ecopack2 | |
| STWBC-WATR |
アクティブ
|
VFQFPN 32 5x5x1.0 | インダストリアル | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
