ST's 10 to 36 V series of high-voltage op-amps offers many possible combinations of power consumption and gain bandwidth. Our wide range of op-amps allows customers to get the best performance for the appropriate accuracy. The high-voltage series of operational amplifiers simplifies the design of sensors for applications from automotive electronics to smart buildings and industrial controls.

Benefiting from the advanced BiCMOS manufacturing process developed in house, the TSB series of 36 V rail-to-rail op-amps delivers the same bandwidth as traditional LM324 operational amplifier, but with a power consumption 4 times lower.

With its high tolerance to ESD and stable performance over a wide temperature range, the TSB series of op-amps gives designers peace of mind.

Precision High Voltage Op-amps

TSB582: High output current (200mA) 36V BiCMOS dual operational amplifier

Available in space saving packages with minimized thermal resistance due to exposed pads, the TSB582 is a dual operational amplifier with embedded thermal shutdown and output current limiter for both industrial and automotive applications.

In closed-loop motor control systems a preferred way to read out the shaft’s angular position is the rotary resolver. Resolvers can be found in various applications, from light industrial to heavy duty, such as: servo motor feedback, oil and gas production, jet engine fuel systems, aircraft flight surface actuators, communication position systems, steering wheels or vehicle control systems.

Since the primary winding is typically powered through a rotary transformer, no brushes or rings are needed. This increases the overall reliability and robustness of the resolver and makes it perfectly suitable for harsh environments with varying temperature and in oily, dusty, or humid surroundings.

The TSB582 was originally designed to manage the power amplification to pilot the primary winding of a resolver device. Thanks to a wide supply voltage range (4 to 36V) the TSB582 is also an excellent fit for power demanding applications like: AC and DC power sources, valve drivers, line drivers, LED drivers and servo drivers.

TSB series: 36 V op amps for automotive and industrial applications

除了出色的速度/功率比外,我们的36 V TSB 系列运算放大器还具有出色的功率密度、高ESD耐受性和低功耗等优点:

•      TSB511TSB512TSB514均属于6 MHz带宽放大器系列,具有轨对轨输入和输出功能,能保证在2.7至36 V单电源以及±1.35至±18 V双电源下工作。 

•      380µA/2.5 MHz TSB57运算放大器的稳定性和稳健性使其成为广泛电压应用的理想解决方案。提供单通道(TSB571)和双通道(TSB572)版本。

•       我们的100µA/560 kHz TSB61运算放大器可在-40°C至125°C的温度范围内工作,非常适合工业和汽车应用,同样提供单通道(TSB611)和双通道(TSB612)版本。

查看我们全新的TSB612YSTTSB612IYDT(符合AEC Q100及Q003标准)。

我们的TSB622 双放大器还实现了出色的速度/功耗比和1.7 MHz增益带宽积,并且每个放大器在36 V的电压下消耗的电流低于375 μA。

•      宽带宽、高转换速率、低噪声、轨对轨能力和精度的结合,使我们的1.8 mA/6 MHz TSB711(单通道)TSB712(双通道)运算放大器适用于各种应用,包括滤波器、电源和电机控制、执行器驱动、霍尔效应传感器和电阻传感器。另提供22 MHz版本:TSB7191 (单通道)TSB7192(双通道)


eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Signal Conditioning Design Tool

Choose design tool:

Active Filters

Handles multi-stage-designs and common topologies
Returns circuit component values
Provides gain, phase and group delay graphs
Low Pass, High Pass and Band Pass


Handles most common configurations
Returns circuit components values
Provides I/O signal waveforms
Inverting, Non Inverting, Window

Current Sensing

Returns circuit component values
Provides current error graphs