Low Power Op Amp

New nanopower, high-accuracy 5V op amps for low-power automotive applications

获得AEC-Q100认证的新型 TSU111IY运算放大器均具有超 高精度和超 低功耗(供电电压范围为1.5至5.5 V), 可以由硬币型锂电池或稳定电压高效供电,适用于传感器信号调节、电池管理系统,以及无线和车载充电器(OBC)等 低功耗汽车应用

AEC-Q100 qualified high temperature (150°C) and long mission profile operational amplifier

TSU111H是一款具有高精度、超低功耗和23 kHz增益带宽的 汽车级运算放大器。 
TSU111H采用SOT23-5封装, 适用于传感器信号调节、电池管理系统、板上充电器(OBC)和无线充电器

TSU series : nano-power (900 nA), high accuracy (150 µV) op amps

The TSU111 (single version-channel) TSU112 (dual version-channel) and TSU114 (quad version-channel) operational amplifiers offer an ultra-low-power consumption per channel of 900 nA (typical) and 1.2 µA (maximum) when supplied by 3.3 V.

Combined with a supply voltage range of 1.5 V to 5.5 V, these features allow the TSU11 series to be efficiently supplied by a coin- type Lithium battery or a regulated voltage in low-power applications.

The high accuracy of 150 µV (maximum) max. and 11.5 kHz gain bandwidth make these op amps ideal for sensor signal conditioning, battery supplied or energy-harvesting applications.

TSZ12 series: ultra precision and low-power op amp for IoT applications

ST’s zero-drift op amps ideal choice for sensor and control interfaces in a wide range of battery-powered IoT applications.

The devices operate from 1.8V to 5.5V, with quiescent current below 40μA at 5V, gain-bandwidth product of 400kHz, and ultra-low input bias current.

  • The single-channel TSZ121 is pin- and package-compatible with comparable devices from other manufacturers.
  • The dual-channel TSZ122 offers popular MiniSO-8 and SO-8 packages plus the option of a miniature 2mm x 2mm DFN8.
  • The TSZ124 quad op amp in TSSOP-14 and 3mm x 3mm QFN16

The devices provide the industry’s broadest choice of zero-drift op amps.


eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Signal Conditioning Design Tool

Choose design tool:

Active Filters

Handles multi-stage-designs and common topologies
Returns circuit component values
Provides gain, phase and group delay graphs
Low Pass, High Pass and Band Pass


Handles most common configurations
Returns circuit components values
Provides I/O signal waveforms
Inverting, Non Inverting, Window

Current Sensing

Returns circuit component values
Provides current error graphs