概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

OTT媒体播放器通过互联网提供视听内容 — 而不是通过传统的有线或卫星电视服务提供内容。视听内容可以通过有线或无线连接以流媒体形式实时传输到到电视等显示设备,也可以存储起来供以后观看。

ST提供一系列适用于OTT媒体播放器设计的产品。主要产品包括音频放大器、用于手势控制的运动和接近传感器、蓝牙连接解决方案、以及一系列灵活的USB Type-C和供电解决方案。我们还提供高压和低压MOSFET、FERD/Schottky和超快二极管、以及用于PFC、HB-LLC谐振电路的STRVS保护装置和专用的智能模拟控制器,满足所有播放器供电要求。

产品型号
Description
STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

STEVAL-BLUEMIC-1 Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module Quick view

主要特性

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-BCNKT01V1 BlueCoin Starter kit Quick view

主要特性

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

STEVAL-STLKT01V1 SensorTile development kit Quick view

主要特性

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

产品型号
STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

主要特性

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-BCNKT01V1

BlueCoin Starter kit

主要特性

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

STEVAL-STLKT01V1

SensorTile development kit

主要特性

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • Description 版本 文档大小 操作
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • Description 版本 文档大小 操作
      UM2196
      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE
      1.0
      4.12 MB
      PDF
      UM2240
      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform
      2.0
      866.22 KB
      PDF
      UM2257
      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module
      2.0
      7.19 MB
      PDF
      UM2101
      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform
      5.0
      1.36 MB
      PDF
      UM2196

      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE

      UM2240

      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform

      UM2257

      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module

      UM2101

      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform

    • Description 版本 文档大小 操作
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.1
      1.78 MB
      PDF
      PM0257
      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南
      1.0
      1.33 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南

演示和培训资料

    • Description 版本 文档大小 操作
      FP-AUD-BVLINK1_Quick_start_guide 1.0
      3.08 MB
      PDF
      FP-AUD-BVLINK2_Quick_Start_Guide 1.1
      2.61 MB
      PDF
      How to use BlueCoin with STBlueMS mobile app hand-on and LABs 1.0
      5.44 MB
      PDF
      STEVAL-BCNKT01V1快速入门指南 1.01
      2.49 MB
      PDF
      STEVAL-STLKT01V1 Quick start guide 2.4
      2.02 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      FP-AUD-BVLINK1_Quick_start_guide

      FP-AUD-BVLINK2_Quick_Start_Guide

      How to use BlueCoin with STBlueMS mobile app hand-on and LABs

      STEVAL-BCNKT01V1快速入门指南

      STEVAL-STLKT01V1 Quick start guide

      X-NUCLEO-IDB05A1 Quick start guide

出版刊物和宣传资料

    • Description 版本 文档大小 操作
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      714.73 KB
      PDF
      BlueNRG-2 新一代蓝牙低功耗片上系统 3.0
      222.22 KB
      PDF
      SensorTile an IoT design lab
      1.61 MB
      PDF
      Serial EEPROM 1.0
      1.73 MB
      PDF

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 新一代蓝牙低功耗片上系统

      SensorTile an IoT design lab

      Serial EEPROM

    • Description 版本 文档大小 操作
      EEPROM selection guide 2.0
      1,007.87 KB
      PDF
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      EEPROM selection guide

      Linear and Switching Voltage Regulators Selection Guide

软件

    • 产品型号

      Embedded software samples for BlueCoin: data streaming via USB and BLE, logging on SD card, gesture recognition, audio acquisition and playback

      Audio and inertial data streaming via Bluetooth® low energy using SPBTLE-1S very low power application module based on BlueNRG-1

      Setup for BlueNRG Kits

      BlueNRG-1, BlueNRG-2 DK SW package

      Embedded software samples for SensorTile, including sensor data streaming via USB and BLE, data logging on SD card, audio acquisition and playback

    • 产品型号

      Bluetooth Low Energy software expansion for STM32Cube

    • 产品型号

      BlueNRG current consumption estimation tool

Amplifiers and Comparators

产品型号 Description
TS922 Excellent audio performance / low distortion (0.005%)
TSH22 High gain bandwidth product bipolar op-amp
TSH345 Single supply triple video buffer and selectable filter for HD and SD video applications
产品型号
Excellent audio performance / low distortion (0.005%)
High gain bandwidth product bipolar op-amp
Single supply triple video buffer and selectable filter for HD and SD video applications

Audio ICs

产品型号 Description
STA309A Multi-channel digital audio processor with DDX®
产品型号
Multi-channel digital audio processor with DDX®

Diodes and Rectifiers

产品型号 Description
FERD15S50 50 V, 15 A Field-Effect Rectifier Diode (FERD)
STPS2H100ZF 100 V, 2 A SOD-123Flat Power Schottky rectifier
STPS2H100ZFY Automotive 100 V, 2 A SOD123Flat Power Schottky Rectifier
产品型号
50 V, 15 A Field-Effect Rectifier Diode (FERD)
100 V, 2 A SOD-123Flat Power Schottky rectifier
Automotive 100 V, 2 A SOD123Flat Power Schottky Rectifier

EMI Filtering and Signal Conditioning

产品型号 Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
ECMF02-2BF3 Common mode filter with ESD protection for high speed serial interface
ECMF4-20A42N10 Common mode filter with ESD protection
ECMF4-2450A60N10 Common mode filter with ESD protection for High Speed Serial interface
EMIF06-MSD02N16 6-line EMI filter and ESD protection for T-Flash and micro SD card™ interfaces
EMIF08-LCD04M16 8-line L-C EMI filter and ESD protection for display interfaces
产品型号
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
Common mode filter with ESD protection for high speed serial interface
Common mode filter with ESD protection
Common mode filter with ESD protection for High Speed Serial interface
6-line EMI filter and ESD protection for T-Flash and micro SD card™ interfaces
8-line L-C EMI filter and ESD protection for display interfaces

Interfaces and Transceivers

产品型号 Description
STUSB1602 USB Type-C controller (with Tx/Rx line driver and BMC)
产品型号
USB Type-C controller (with Tx/Rx line driver and BMC)

电源管理

产品型号 Description
L6928 High efficiency monolithic synchronous step down regulator
LDLN015 150 mA - ultra low noise - high PSRR linear voltage regulator IC
STEF4S eFuse ( electronic fuse ) for 3.3V and 5V lines
STLQ020 200 mA ultra-low quiescent current LDO
STWBC-EP Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications
产品型号
High efficiency monolithic synchronous step down regulator
150 mA - ultra low noise - high PSRR linear voltage regulator IC
eFuse ( electronic fuse ) for 3.3V and 5V lines
200 mA ultra-low quiescent current LDO
Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications

Protection Devices

产品型号 Description
ESDA6V1BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
HSP051-4N10 4-line ESD protection for high speed lines
HSP053-4M5 4-line ESD protection for high-speed lines
产品型号
QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
High-power transient voltage supressor (TVS)
4-line ESD protection for high speed lines
4-line ESD protection for high-speed lines

Switches and Multiplexers

产品型号 Description
STCC2540 USB charging controller with integrated power switch
产品型号
USB charging controller with integrated power switch

无线收发器、MCU、模块

产品型号 Description
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
产品型号
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1