概观
解决方案
HW Evaluation Tools
资源
工具和软件
Key Products
开始
型号
Description
STEVAL-ISB044V1 Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP Quick view

主要特性

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1 SensorTile development kit Quick view

主要特性

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1 BlueCoin Starter kit Quick view

主要特性

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1 Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module Quick view

主要特性

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1 Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33 Quick view

主要特性

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
型号
STEVAL-ISB044V1

Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP

主要特性

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1

SensorTile development kit

主要特性

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1

BlueCoin Starter kit

主要特性

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

主要特性

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

主要特性

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

技术文档

    • Description 版本 文档大小 Action
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN3145
      STEVAL-CCA025V1 demonstration board user guidelines for the TS4621 high-performance stereo headphone amplifier
      1.2
      1,018.88 KB
      PDF
      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN3145

      STEVAL-CCA025V1 demonstration board user guidelines for the TS4621 high-performance stereo headphone amplifier

    • Description 版本 文档大小 Action
      UM2196
      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE
      1.0
      4.12 MB
      PDF
      UM2240
      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform
      2.0
      866.22 KB
      PDF
      UM2257
      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module
      2.0
      7.19 MB
      PDF
      UM2101
      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform
      5.0
      1.36 MB
      PDF
      UM2196

      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE

      UM2240

      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform

      UM2257

      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module

      UM2101

      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform

    • Description 版本 文档大小 Action
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.0
      1.78 MB
      PDF
      PM0257
      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南
      1.0
      1.33 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南

演示和培训资料

    • Description 版本 文档大小 Action
      FP-AUD-BVLINK1_Quick_start_guide 1.0
      3.08 MB
      PDF
      FP-AUD-BVLINK2_Quick_Start_Guide 1.1
      2.61 MB
      PDF
      How to use BlueCoin with STBlueMS mobile app hand-on and LABs 1.0
      5.44 MB
      PDF
      STEVAL-BCNKT01V1快速入门指南 1.01
      2.49 MB
      PDF
      STEVAL-STLKT01V1 Quick start guide 2.4
      2.02 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      FP-AUD-BVLINK1_Quick_start_guide

      FP-AUD-BVLINK2_Quick_Start_Guide

      How to use BlueCoin with STBlueMS mobile app hand-on and LABs

      STEVAL-BCNKT01V1快速入门指南

      STEVAL-STLKT01V1 Quick start guide

      X-NUCLEO-IDB05A1 Quick start guide

出版刊物和宣传资料

    • Description 版本 文档大小 Action
      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator 04.2017
      730.72 KB
      PDF
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      714.73 KB
      PDF
      BlueNRG-2 新一代蓝牙低功耗片上系统 3.0
      222.22 KB
      PDF
      Resets and supervisors - portfolio overview 1.0
      1.31 MB
      PDF
      STWBC-EP扩展无线电源 12.2017
      853.72 KB
      PDF
      SensorTile an IoT design lab
      1.61 MB
      PDF
      Serial EEPROM 1.0
      1.73 MB
      PDF
      Smart Reset ICs dual push-button 1.0
      767.58 KB
      PDF

      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 新一代蓝牙低功耗片上系统

      Resets and supervisors - portfolio overview

      STWBC-EP扩展无线电源

      SensorTile an IoT design lab

      Serial EEPROM

      Smart Reset ICs dual push-button

    • Description 版本 文档大小 Action
      EEPROM selection guide 2.0
      1,007.87 KB
      PDF
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      EEPROM selection guide

      Linear and Switching Voltage Regulators Selection Guide

软件

    • 型号

      Embedded software samples for BlueCoin: data streaming via USB and BLE, logging on SD card, gesture recognition, audio acquisition and playback

      Audio and inertial data streaming via Bluetooth® low energy using SPBTLE-1S very low power application module based on BlueNRG-1

      Setup for BlueNRG Kits

      BlueNRG-1, BlueNRG-2 DK SW package

      Embedded software samples for SensorTile, including sensor data streaming via USB and BLE, data logging on SD card, audio acquisition and playback

    • 型号

      Bluetooth Low Energy software expansion for STM32Cube

    • 型号

      BlueNRG current consumption estimation tool

Audio ICs

Part number Description
MP23ABS1 High performance MEMS audio sensor single ended analog bottom-port microphone
MP34DT05-A MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
TS4621E High-performance class G stereo headphone amplifier with I2C volume control
TS4621ML High-performance class-G stereo headphone amplifier
TS472 Very low noise microphone preamplifier with 2.0V bias output with active low stdby mode
Part number
High performance MEMS audio sensor single ended analog bottom-port microphone
MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
High-performance class G stereo headphone amplifier with I2C volume control
High-performance class-G stereo headphone amplifier
Very low noise microphone preamplifier with 2.0V bias output with active low stdby mode

Diodes and Rectifiers

Part number Description
FERD15S50 50 V, 15 A Field-Effect Rectifier Diode (FERD)
STPS2H100ZF 100 V, 2 A SOD-123Flat Power Schottky rectifier
Part number
50 V, 15 A Field-Effect Rectifier Diode (FERD)
100 V, 2 A SOD-123Flat Power Schottky rectifier

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
EMIF08-LCD04M16 8-line L-C EMI filter and ESD protection for display interfaces
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
8-line L-C EMI filter and ESD protection for display interfaces

Imaging and Photonics Solutions

Part number Description
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
VL6180X Proximity sensor, gesture and ambient light sensing (ALS) module
Part number
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
Proximity sensor, gesture and ambient light sensing (ALS) module

Interfaces and Transceivers

Part number Description
STUSB4500 Stand-alone USB PD controller (with sink Auto-run mode)
Part number
Stand-alone USB PD controller (with sink Auto-run mode)

MEMS and Sensors

Part number Description
LIS2DH12 3-axis MEMS accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, high-performance acceleration sensor, VFLGA package
LIS2DW12 3-axis MEMS accelerometer, ultra low power, configurable single/double-tap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detections
Part number
3-axis MEMS accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, high-performance acceleration sensor, VFLGA package
3-axis MEMS accelerometer, ultra low power, configurable single/double-tap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detections

电源管理

Part number Description
L6924D Battery charger system with integrated power switch for Li-Ion/Li-Polymer
L6928 High efficiency monolithic synchronous step down regulator
LDLN025 250 mA ultra-low noise LDO
STBB3J 2A, 2MHz, high efficiency dual mode buck-boost DC-DC converter
STBC02 Li-Ion linear battery charger with LDO, load switches and reset generator
STC3117 Gas gauge IC with battery charger control for handheld applications
STLA02 White LED driver for display backlight
STLQ020 200 mA ultra-low quiescent current LDO
STWBC-EP Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications
Part number
Battery charger system with integrated power switch for Li-Ion/Li-Polymer
High efficiency monolithic synchronous step down regulator
250 mA ultra-low noise LDO
2A, 2MHz, high efficiency dual mode buck-boost DC-DC converter
Li-Ion linear battery charger with LDO, load switches and reset generator
Gas gauge IC with battery charger control for handheld applications
White LED driver for display backlight
200 mA ultra-low quiescent current LDO
Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications

Protection Devices

Part number Description
ESDA6V1BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
HSP051-4N10 4-line ESD protection for high speed lines
HSP053-4M5 4-line ESD protection for high-speed lines
Part number
QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
High-power transient voltage supressor (TVS)
4-line ESD protection for high speed lines
4-line ESD protection for high-speed lines

Wireless Transceivers, MCUs and Modules

Part number Description
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
Part number
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1