概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

Brushed DC motors represent the perfect solution in automotive applications where short duty-time are requested. These internally-commutated motors, designed to be run from a direct current power source, are easy-to-drive components used in low-voltage applications ranging from trunk and windows lift, seat positioning, door control, HVAC to EGR, turbo waste gate and throttle valves.

产品型号
Description
EV-VNHD7012AY VNHD7012AY Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNHD7012AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EVAL-L99PM62-72 Evaluation board for L99PM62GXP and L99PM72GXP Quick view

主要特性

  • Two 5V voltage regulators for microcontroller and peripheral supply
  • Ultra low quiescent current in standby modes
  • Programmable reset generator for power-on and undervoltage
  • Configurable window watchdog and fail safe output
  • LIN 2.1 compliant (SAEJ2602 compatible) transceiver
  • Advanced HS CAN transceiver (ISO 11898-2/-5 and SAE J2284 compliant) with local failure and bus failure diagnosis, L99PM72GXP supports selective wake-up functionality as for ISO 11898-6.
  • 3-channel contact monitoring interface with programmable cyclic sense functionality
  • Programmable periodic system wake-up feature
  • ST SPI interface for mode control and diagnosis
  • 5 fully protected high-side drivers with internal 4-channel PWM generator
  • 2 low-side drivers with active Zener clamping
  • 4 internal PWM timers
  • 2 operational amplifiers with rail-to-rail outputs (VS) and low voltage inputs
  • Temperature warning and thermal shutdown
  • Graphic User Interface (GUI)

Show More

SAMPLEKITVNH7 VIPower™ M0-7 family H-bridges for DC Motor Control Quick view

主要特性

  • Immediate evaluation of M0-7 HBridge drivers with demonstration examples
  • The Kit includes:
    • 8 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

EV-VNH5050A VNH5050A Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNH5050-E
  • Provides thermal heat-sinking for ease of use in prototyping
  • Provides electrical connectivity for easy prototyping

Show More

EV-VN7010AJ VN7010AJ Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7010AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7140AS VN7140AS Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7140AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7040AS VN7040AS Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7040AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7050AJ VN7050AJ evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7050AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7020AJ VN7020AJ evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7020AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7040AJ VN7040AJ evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7040AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7140AJ VN7140AJ evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7140AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EVAL-L9958 Evaluation board for high current (8.6A) DC and Stepper Motors Quick view

主要特性

  • Wide supply voltage range (VBatt): 4 V ÷ 28 V
  • Current regulation threshold set by SPI: 4 levels from 2.5 A to 8.6 A (Typ.)
  • Device controlled and programmed via SPI Diagnostic functions accessible via SPI:
    • short circuit to battery
    • short circuit to ground
    • short circuit overload
    • over temperature
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal
  • Input signal connector compatible with the SPC5 Discovery+ boards
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Possibility to hardware setup EN, DI and DIR by jumpers
  • No heat-sink is required

Show More

EV-VN7050AS VN7050AS evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7050AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

SAMPLEKITM0-7 Evaluation sample box Quick view

主要特性

  • Immediate evaluation of M0-7 devices with demonstration examples
  • The kit includes:
    • 10 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

EV-VNH7100AS VNH7100AS Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7100AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNH7070AS VNH7070AS Evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7070AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VN7004CH VN7004CH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7004CH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7007ALH VN7007ALH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7007ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7004CLH VN7004CLH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7004CLH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003ALH VN7003ALH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7003ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003AH VN7003AH Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

EVAL-L9960 Evaluation board L9960 H-bridge Quick view

主要特性

  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required

Show More

EVAL-L9960T Evaluation board L9960T Dual H-bridge Quick view

主要特性

  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required

Show More

EV-VN7008AJ VN7008AJ Evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VN7008AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VNH7040AY VNH7040AY Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7040AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool Quick view

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VNH7070BAS VNH7070BAS Evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7070BAS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNH7100BAS VNH7100BAS Evaluation board Quick view

主要特性

  • Simple single IC application board dedicated for VNH7100BAS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNHD7008AY VNHD7008AY Evaluation Board Quick view

主要特性

  • Simple single IC application board dedicated for VNHD7008AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VN7007AH VN7007AH Evaluation Board
产品型号
EV-VNHD7012AY

VNHD7012AY Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNHD7012AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EVAL-L99PM62-72

Evaluation board for L99PM62GXP and L99PM72GXP

主要特性

  • Two 5V voltage regulators for microcontroller and peripheral supply
  • Ultra low quiescent current in standby modes
  • Programmable reset generator for power-on and undervoltage
  • Configurable window watchdog and fail safe output
  • LIN 2.1 compliant (SAEJ2602 compatible) transceiver
  • Advanced HS CAN transceiver (ISO 11898-2/-5 and SAE J2284 compliant) with local failure and bus failure diagnosis, L99PM72GXP supports selective wake-up functionality as for ISO 11898-6.
  • 3-channel contact monitoring interface with programmable cyclic sense functionality
  • Programmable periodic system wake-up feature
  • ST SPI interface for mode control and diagnosis
  • 5 fully protected high-side drivers with internal 4-channel PWM generator
  • 2 low-side drivers with active Zener clamping
  • 4 internal PWM timers
  • 2 operational amplifiers with rail-to-rail outputs (VS) and low voltage inputs
  • Temperature warning and thermal shutdown
  • Graphic User Interface (GUI)

Show More

SAMPLEKITVNH7

VIPower™ M0-7 family H-bridges for DC Motor Control

主要特性

  • Immediate evaluation of M0-7 HBridge drivers with demonstration examples
  • The Kit includes:
    • 8 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

EV-VNH5050A

VNH5050A Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNH5050-E
  • Provides thermal heat-sinking for ease of use in prototyping
  • Provides electrical connectivity for easy prototyping

Show More

EV-VN7010AJ

VN7010AJ Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7010AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7140AS

VN7140AS Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7140AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7040AS

VN7040AS Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7040AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7050AJ

VN7050AJ evaluation board

主要特性

  • Simple single IC application board dedicated for VN7050AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7020AJ

VN7020AJ evaluation board

主要特性

  • Simple single IC application board dedicated for VN7020AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7040AJ

VN7040AJ evaluation board

主要特性

  • Simple single IC application board dedicated for VN7040AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VN7140AJ

VN7140AJ evaluation board

主要特性

  • Simple single IC application board dedicated for VN7140AJ-E
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with MultiSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • MultiSense diagnostic functions
    • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EVAL-L9958

Evaluation board for high current (8.6A) DC and Stepper Motors

主要特性

  • Wide supply voltage range (VBatt): 4 V ÷ 28 V
  • Current regulation threshold set by SPI: 4 levels from 2.5 A to 8.6 A (Typ.)
  • Device controlled and programmed via SPI Diagnostic functions accessible via SPI:
    • short circuit to battery
    • short circuit to ground
    • short circuit overload
    • over temperature
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal
  • Input signal connector compatible with the SPC5 Discovery+ boards
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Possibility to hardware setup EN, DI and DIR by jumpers
  • No heat-sink is required

Show More

EV-VN7050AS

VN7050AS evaluation board

主要特性

  • Simple single IC application board dedicated for VN7050AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high side driver with analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

SAMPLEKITM0-7

Evaluation sample box

主要特性

  • Immediate evaluation of M0-7 devices with demonstration examples
  • The kit includes:
    • 10 samples
    • Printed card providing overview of product portfolio, key features, main applications, package description.

Show More

EV-VNH7100AS

VNH7100AS Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNH7100AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNH7070AS

VNH7070AS Evaluation board

主要特性

  • Simple single IC application board dedicated for VNH7070AS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VN7004CH

VN7004CH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7004CH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7007ALH

VN7007ALH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7007ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7004CLH

VN7004CLH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7004CLH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003ALH

VN7003ALH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7003ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003AH

VN7003AH Evaluation Board

主要特性

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

EVAL-L9960

Evaluation board L9960 H-bridge

主要特性

  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required

Show More

EVAL-L9960T

Evaluation board L9960T Dual H-bridge

主要特性

  • Wide supply voltage range (VBatt): 4V÷28V
  • Current limitation threshold set by SPI:
  • 4 levels from 2.5A to 8.6A (Typ.)
  • Device controlled and programmed via SPI
  • Diagnostic functions accessible via SPI:
    • short circuit to battery,
    • short circuit to ground,
    • short circuit overload,
    • over temperature,
    • open load
  • On board 5V, 1.5A Voltage regulator
  • 2 LEDs for monitoring VBatt and EN signal.
  • Input signal connector compatible with the SPC5 Discovery+ boards.
  • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
  • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
  • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
    • No heat-sink is required

Show More

EV-VN7008AJ

VN7008AJ Evaluation board

主要特性

  • Simple single IC application board dedicated for VN7008AJ
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
    • Loss of ground and loss of VCC
    • Reverse battery with external components
    • Electrostatic discharge protection

Show More

EV-VNH7040AY

VNH7040AY Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNH7040AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VNH7070BAS

VNH7070BAS Evaluation board

主要特性

  • Simple single IC application board dedicated for VNH7070BAS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNH7100BAS

VNH7100BAS Evaluation board

主要特性

  • Simple single IC application board dedicated for VNH7100BAS
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VNHD7008AY

VNHD7008AY Evaluation Board

主要特性

  • Simple single IC application board dedicated for VNHD7008AY
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping

Show More

EV-VN7007AH

VN7007AH Evaluation Board

00 选择要下载的文档

技术文档

    • Description 版本 文档大小 操作
      AN5268
      Driving high power DC motor by paralleling M0-7 VNHD7xxxAY H-Bridge and M0-7 high-side driver
      1.2
      467.19 KB
      PDF
      AN4627
      Getting started with EVAL - L9958
      1.0
      1.33 MB
      PDF
      AN4487
      Getting started with SPC560P-DISP
      1.1
      631.63 KB
      PDF
      AN4782
      Getting started with SPC56B-Discovery board
      1.0
      585.82 KB
      PDF
      AN4867
      L9960, L9960T automotive integrated H-bridges
      5.0
      1.23 MB
      PDF
      AN2229
      Startup behavior L9903/L9904
      2.0
      151.49 KB
      PDF
      AN4892
      VIPower M0-5 H-bridges - hardware design guide
      2.0
      2.13 MB
      PDF
      AN5026
      VIPower M0-7 H-Bridges for Automotive DC Motor Control
      2.0
      18.77 MB
      PDF
      AN5268

      Driving high power DC motor by paralleling M0-7 VNHD7xxxAY H-Bridge and M0-7 high-side driver

      AN4627

      Getting started with EVAL - L9958

      AN4487

      Getting started with SPC560P-DISP

      AN4782

      Getting started with SPC56B-Discovery board

      AN4867

      L9960, L9960T automotive integrated H-bridges

      AN2229

      Startup behavior L9903/L9904

      AN4892

      VIPower M0-5 H-bridges - hardware design guide

      AN5026

      VIPower M0-7 H-Bridges for Automotive DC Motor Control

出版刊物和宣传资料

    • Description 版本 文档大小 操作
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive-grade ESD protections for CAN transceivers 1.0
      1.23 MB
      PDF
      New fully integrated, reliable and compact drivers for DC motors
      1.22 MB
      PDF
      OMNIFET III General purpose fully-protected FETs for low-side load driving 1.0
      2 MB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      VIPower Zero series - Innovative smart power switches for high-current applications 1.0
      291.96 KB
      PDF

      A798x, A597x switching regulators for car power management

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive-grade ESD protections for CAN transceivers

      New fully integrated, reliable and compact drivers for DC motors

      OMNIFET III General purpose fully-protected FETs for low-side load driving

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      VIPower Zero series - Innovative smart power switches for high-current applications

    • Description 版本 文档大小 操作
      Automotive powertrain and safety ICs 1.0
      838.51 KB
      PDF
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF

      Automotive powertrain and safety ICs

      Automotive-grade protection devices and rectifiers

    • Description 版本 文档大小 操作
      Body and Convenience Applications Brochure 1.0
      1.81 MB
      PDF
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      Electro-Mobility Applications Brochure 1.0
      1.3 MB
      PDF
      ST’s solutions for automotive seating systems 1.0
      1.3 MB
      PDF
      Smart power solutions for car body applications 1.0
      1.85 MB
      PDF
      VIPower M0-7 - Miniaturized high-side driver family 1.0
      2.07 MB
      PDF

      Body and Convenience Applications Brochure

      Driving smart power in automotive

      Electro-Mobility Applications Brochure

      ST’s solutions for automotive seating systems

      Smart power solutions for car body applications

      VIPower M0-7 - Miniaturized high-side driver family

开发工具硬件

    • 产品型号

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

      VIPower smart product finder application for Android and iOS

软件

    • 产品型号

      EVAL-L9958 Graphical User Interface

      EVAL-L9960 Graphical User Interface

      EVAL-L9960T Graphical User Interface

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Dynamic Electro-Thermal simulator for devices in VIPower technology

Automotive Analog and Power

产品型号 Description
L9958 SPI Controlled H-Bridge
L9960 H-bridge
L9960T Dual H-bridge
L99PM62GXP Power Management IC with LIN and high speed CAN
L99PM72GXP Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
VN7003AH High-side driver with Current Sense analog feedback for automotive applications
VN7007AH High side driver with current sense analog feedback for automotive applications
VN7010AJ High-side driver with MultiSense analog feedback for automotive applications
VNH7040AY Automotive fully integrated H-bridge motor driver
VNH7070AS Automotive fully integrated H-bridge motor driver
VNH7070BAS Automotive fully integrated H-bridge motor driver
VNH7100AS Automotive fully integrated H-bridge motor driver
VNH7100BAS Automotive fully integrated H-bridge motor driver
VNHD7008AY H-bridge motor driver for automotive DC motor driving
VNL5030S5-E OMNIFET III: fully protected low-side driver
VNL5300S5-E Single channel LSD with digital status
产品型号
SPI Controlled H-Bridge
H-bridge
Dual H-bridge
Power Management IC with LIN and high speed CAN
Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
High-side driver with Current Sense analog feedback for automotive applications
High side driver with current sense analog feedback for automotive applications
High-side driver with MultiSense analog feedback for automotive applications
Automotive fully integrated H-bridge motor driver
Automotive fully integrated H-bridge motor driver
Automotive fully integrated H-bridge motor driver
Automotive fully integrated H-bridge motor driver
Automotive fully integrated H-bridge motor driver
H-bridge motor driver for automotive DC motor driving
OMNIFET III: fully protected low-side driver
Single channel LSD with digital status

Automotive Microcontrollers

产品型号 Description
SPC582B60E1 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
SPC58EC80E5 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
产品型号
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

Diodes and Rectifiers

产品型号 Description
STPS40L45C-Y Automotive 46 V, 40 A dual Low Drop Power Schottky Rectifier
STTH15RQ06-Y Automotive 600 V, 15 A Turbo 2 Soft Ultrafast Recovery Diode
产品型号
Automotive 46 V, 40 A dual Low Drop Power Schottky Rectifier
Automotive 600 V, 15 A Turbo 2 Soft Ultrafast Recovery Diode

Microcontrollers & Microprocessors

产品型号 Description
STM8AF52AA Automotive 8-bit MCU with 128 Kbytes Flash, LIN, CAN, 24 MHz CPU, integrated EEPROM
产品型号
Automotive 8-bit MCU with 128 Kbytes Flash, LIN, CAN, 24 MHz CPU, integrated EEPROM

Protection Devices

产品型号 Description
ESDCAN01-2BLY Automotive dual-line TVS in SOT23-3L for CAN bus (12 V system)
ESDCAN03-2BWY Automotive dual-line TVS in SOT323-3L for CAN bus (12 V system)
ESDLIN1524BJ Transil™, transient voltage surge suppressor diode for ESD protection
SM4TY Automotive 400 W TVS in SMA
SM6TY Automotive 600 W TVS in SMB
产品型号
Automotive dual-line TVS in SOT23-3L for CAN bus (12 V system)
Automotive dual-line TVS in SOT323-3L for CAN bus (12 V system)
Transil™, transient voltage surge suppressor diode for ESD protection
Automotive 400 W TVS in SMA
Automotive 600 W TVS in SMB