概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始

使用支持近场通信(NFC)的卡或智能手机能够更方便、安全地进入车辆。长期以来,汽车钥匙一直是车辆安全性的薄弱环节,随着NFC技术逐渐从高级车型应用到主流车型,它将逐渐取代汽车钥匙。基于NFC的解决方案不仅将增加一种更灵活、性价比更高的访问机制,还将提供新的可能性,例如,租车公司可以将使用NFC解锁和起动租赁汽车的功能传送至租车人的智能手机。

ST的NFC收发器和带有嵌入式硬件安全模块(HSM)的SPC58微控制器能够满足此类访问控制应用的最重要要求:安全性、可靠性、可用性和性价比。

产品型号
描述
SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool 快速查看

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

SPC58NG-DISP Discovery Kit for SPC58NG - G line 快速查看

主要特性

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

SPC58EC-DISP Discovery Kit for SPC58EC - C line 快速查看

主要特性

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

SPC582B-DIS Discovery Kit for SPC582 B line 快速查看

主要特性

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

EVAL-L5963Q L5963Q evaluation board 快速查看

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT 快速查看

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection 快速查看

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

EVAL-L5963 L5963 Evaluation board 快速查看

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal 快速查看

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

产品型号
SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

主要特性

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

SPC58NG-DISP

Discovery Kit for SPC58NG - G line

主要特性

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

Show More

SPC58EC-DISP

Discovery Kit for SPC58EC - C line

主要特性

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

SPC582B-DIS

Discovery Kit for SPC582 B line

主要特性

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

EVAL-L5963Q

L5963Q evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

EVAL-L5963

L5963 Evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4974
      Antenna matching for ST25R3911B/ST25R391x devices
      2.0
      3 MB
      PDF
      AN4914
      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices
      2.0
      1.9 MB
      PDF
      AN4102
      Introducing the low-power concept in automotive applications using the STM8AL board of the STM8A-DISCOVERY
      1.2
      168.53 KB
      PDF
      AN4178
      LIN communication with two STM8AF boards of STM8A-DISCOVERY
      1.3
      102.9 KB
      PDF
      AN5043
      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices
      4.0
      873.78 KB
      PDF
      AN3258
      STM8AF and STM8S series HSI oscillator calibration using LIN automatic resynchronization
      2.0
      247.91 KB
      PDF
      AN4985
      Wake-up mode of the ST25R3911B/ST25R391x
      1.0
      805.57 KB
      PDF
      AN4974

      Antenna matching for ST25R3911B/ST25R391x devices

      AN4914

      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices

      AN4102

      Introducing the low-power concept in automotive applications using the STM8AL board of the STM8A-DISCOVERY

      AN4178

      LIN communication with two STM8AF boards of STM8A-DISCOVERY

      AN5043

      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices

      AN3258

      STM8AF and STM8S series HSI oscillator calibration using LIN automatic resynchronization

      AN4985

      Wake-up mode of the ST25R3911B/ST25R391x

演示和培训资料

    • 描述 版本 文档大小 操作
      ST253911B-15 Product Presentation 1.0
      3.4 MB
      PDF

      ST253911B-15 Product Presentation

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      Automotive NFC/HF readers 1.0
      933.16 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      High performance NFC/RFID readers 1.0
      975.29 KB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      STM8A-SafeASIL - Safety design package for STM8AF MCUs 17.12
      472.94 KB
      PDF
      STM8CubeMX eases STM8 configuration 19.01
      1.21 MB
      PDF

      A798x, A597x switching regulators for car power management

      Automotive NFC/HF readers

      Automotive multichannel power management ICs

      High performance NFC/RFID readers

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      STM8A-SafeASIL - Safety design package for STM8AF MCUs

      STM8CubeMX eases STM8 configuration

    • 描述 版本 文档大小 操作
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF

      Automotive-grade protection devices and rectifiers

    • 描述 版本 文档大小 操作
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      SPC58 C-line 1.0
      933.22 KB
      PDF
      STM8 8-bit MCU family 18.10
      3.47 MB
      PDF

      NFC solutions from ST

      SPC58 C-line

      STM8 8-bit MCU family

开发工具硬件

    • 产品型号

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

软件

    • 产品型号

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

    • 产品型号

      Antenna Matching Tool for ST25R NFC/HF reader family

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

二极管(功率肖特基和场效应整流)产品选择器

TVS产品选择器

Automotive Analog and Power

产品型号 描述
L5963 Dual monolithic switching regulator with LDO and HSD
L5964 Monolithic dual 3.5 A step-down switching regulator with LDO
产品型号
Dual monolithic switching regulator with LDO and HSD
Monolithic dual 3.5 A step-down switching regulator with LDO

Automotive Microcontrollers

产品型号 描述
SPC584B70E7 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
产品型号
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

MEMS and Sensors

产品型号 描述
AIS2DW12 MEMS digital output motion sensor: ultra-low-power 3-axis accelerometer for automotive applications
产品型号
MEMS digital output motion sensor: ultra-low-power 3-axis accelerometer for automotive applications

Microcontrollers & Microprocessors

产品型号 描述
STM8AF52A9 Automotive 8-bit MCU with 128 Kbytes Flash, LIN, CAN, 24 MHz CPU, integrated EEPROM
STM8AL3188 Automotive 8-bit ultra-low-power MCU with 64 Kbytes Flash, LIN, RTC, data EEPROM, timers, USARTs, I2C, SPIs, ADC, DAC, COMPs
产品型号
Automotive 8-bit MCU with 128 Kbytes Flash, LIN, CAN, 24 MHz CPU, integrated EEPROM
Automotive 8-bit ultra-low-power MCU with 64 Kbytes Flash, LIN, RTC, data EEPROM, timers, USARTs, I2C, SPIs, ADC, DAC, COMPs

NFC

产品型号 描述
ST25R3914 NFC / HF RFID Reader IC for Automotive
ST25R3915 NFC / HF RFID Reader IC for Automotive
产品型号
NFC / HF RFID Reader IC for Automotive
NFC / HF RFID Reader IC for Automotive

Secure MCUs

产品型号 描述
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
产品型号
32bit ARM® SecurCore® SC300 optimized for M2M for car
支持中心或 提供反馈