Wi-Fi连接节点

搜索历史

Please log in to show your saved searches.

概述

解决方案

硬件评估工具

资源

Tools and Software

主要产品

开始

快速链接

产品型号	描述
STEVAL-STWINWFV1	Wi-Fi expansion for the SensorTile Wireless Industrial Node (STWIN) kit	Quick view Key Features Wi-Fi adapter for STWIN (STEVAL-STWINKT1) Plugs into STWIN core system board through dedicated 12-pin connector Single 3.3 V power supply input ISM43362-M3G-L44-E Wi-Fi module: 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device Fully contained TCP/IP stack Host interface: SPI up to 25 MHz Network features ICMP ( Ping), ARP, DHCP,TCP, UDP Low power operation (3.3 V supply) with built-in low power modes Secure Wi-Fi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK CE certified FCC certified IC certified RoHS and China RoHS compliant WEEE compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
32F413HDISCOVERY	Discovery kit with STM32F413ZH MCU	Quick view Key Features STM32F413ZHT6 microcontroller featuring 1.5 Mbytes of Flash memory and 320 Kbytes of SRAM, in LQFP144 package On-board ST-LINK/V2-1 supporting USB re-enumeration capability USB ST-LINK functions: Virtual COM port Mass storage Debug port 240x240-pixel LCD with parallel interface and touch-panel connector 8-Mbit PSRAM; 512K word x 16bits 128-Mbit Quad-SPI Flash memory I² S audio codec Jack connector for Audio line with microphone input and stereo output Two on-board ST-MEMS microphones Connector extension for up to 5-MEMS microphones. USB OTG FS with Micro-AB connector Connector for microSD^™ card Integrated Wi-Fi^® module 802.11 b/g/n Two push-buttons (user and reset) Two user LEDs: one green and one red Arduino^™ Uno V3 connectors Four power supply options: ST LINK/V2-1 USB FS connector 5 V from Arduino^™ Uno V3 USB charger Comprehensive free software including a variety of examples, part of the STM32Cube package Support of a wide choice of integrated development environments Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
ST25DV-DISCOVERY	Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability	Quick view Key Features Two ready-to-use printed circuit boards (PCB): ST25DV_Discovery_Mboard: STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM. LCD color screen (320 x 200 pixels) Touch screen driver Different color LEDs (power, user, ST link) User push button Joystick for menu selection Reset button On board ST link for microcontroller firmware upgrade and debug ST link mini USB User micro USB USB micro or mini connector for board powering Demonstration use cases stored in memory Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector ST25DV_Discovery_ANT_C5: 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB ST25DV04K Dynamic NFC / RFID tag I² C interface connector Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
B-L475E-IOT01A	STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi	Quick view Key Features Ultra-low-power STM32L4 Series MCUs based on Arm^® Cortex^® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package 64-Mbit Quad-SPI (Macronix) Flash memory Bluetooth^® V4.1 module (SPBTLE-RF) Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915) 802.11 b/g/n compliant Wi-Fi^® module from Inventek Systems (ISM43362-M3G-L44) Dynamic NFC tag based on M24SR with its printed NFC antenna 2 digital omnidirectional microphones (MP34DT01) Capacitive digital sensor for relative humidity and temperature (HTS221) High-performance 3-axis magnetometer (LIS3MDL) 3D accelerometer and 3D gyroscope (LSM6DSL) 260-1260 hPa absolute digital output barometer (LPS22HB) Time-of-Flight and gesture-detection sensor (VL53L0X) 2 push-buttons (user and reset) USB OTG FS with Micro-AB connector Expansion connectors: Arduino™ Uno V3 PMOD Flexible power-supply options: ST LINK USB V_BUS or external sources On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR^™ , Keil^® , GCC-based IDEs, Arm^® Mbed Enabled^™ Arm^® Mbed^™ online (see http://mbed.org) Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber

产品型号

STEVAL-STWINWFV1

Wi-Fi expansion for the SensorTile Wireless Industrial Node (STWIN) kit

快速查看

Key Features

Wi-Fi adapter for STWIN (STEVAL-STWINKT1)
Plugs into STWIN core system board through dedicated 12-pin connector
Single 3.3 V power supply input
ISM43362-M3G-L44-E Wi-Fi module:
- 802.11 b/g/n Compatible based on Broadcom MAC/Baseband/Radio device
- Fully contained TCP/IP stack
- Host interface: SPI up to 25 MHz
- Network features ICMP ( Ping), ARP, DHCP,TCP, UDP
- Low power operation (3.3 V supply) with built-in low power modes
- Secure Wi-Fi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK
- CE certified
- FCC certified
- IC certified
RoHS and China RoHS compliant
WEEE compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

32F413HDISCOVERY

Discovery kit with STM32F413ZH MCU

快速查看

Key Features

STM32F413ZHT6 microcontroller featuring 1.5 Mbytes of Flash memory and 320 Kbytes of SRAM, in LQFP144 package
On-board ST-LINK/V2-1 supporting USB re-enumeration capability
USB ST-LINK functions:
- Virtual COM port
- Mass storage
- Debug port
240x240-pixel LCD with parallel interface and touch-panel connector
8-Mbit PSRAM; 512K word x 16bits
128-Mbit Quad-SPI Flash memory
I² S audio codec
Jack connector for Audio line with microphone input and stereo output
Two on-board ST-MEMS microphones
Connector extension for up to 5-MEMS microphones.
USB OTG FS with Micro-AB connector
Connector for microSD^™ card
Integrated Wi-Fi^® module 802.11 b/g/n
Two push-buttons (user and reset)
Two user LEDs: one green and one red
Arduino^™ Uno V3 connectors
Four power supply options:
- ST LINK/V2-1
- USB FS connector
- 5 V from Arduino^™ Uno V3
- USB charger
Comprehensive free software including a variety of examples, part of the STM32Cube package
Support of a wide choice of integrated development environments

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

快速查看

Key Features

Two ready-to-use printed circuit boards (PCB):
- ST25DV_Discovery_Mboard:
- STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
- LCD color screen (320 x 200 pixels)
- Touch screen driver
- Different color LEDs (power, user, ST link)
- User push button
- Joystick for menu selection
- Reset button
- On board ST link for microcontroller firmware upgrade and debug
- ST link mini USB
- User micro USB
- USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
ST25DV_Discovery_ANT_C5:
- 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
- ST25DV04K Dynamic NFC / RFID tag
- I² C interface connector
- Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

B-L475E-IOT01A

STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

快速查看

Key Features

Ultra-low-power STM32L4 Series MCUs based on Arm^® Cortex^® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
64-Mbit Quad-SPI (Macronix) Flash memory
Bluetooth^® V4.1 module (SPBTLE-RF)
Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
802.11 b/g/n compliant Wi-Fi^® module from Inventek Systems (ISM43362-M3G-L44)
Dynamic NFC tag based on M24SR with its printed NFC antenna
2 digital omnidirectional microphones (MP34DT01)
Capacitive digital sensor for relative humidity and temperature (HTS221)
High-performance 3-axis magnetometer (LIS3MDL)
3D accelerometer and 3D gyroscope (LSM6DSL)
260-1260 hPa absolute digital output barometer (LPS22HB)
Time-of-Flight and gesture-detection sensor (VL53L0X)
2 push-buttons (user and reset)
USB OTG FS with Micro-AB connector
Expansion connectors:
- Arduino™ Uno V3
- PMOD
Flexible power-supply options:
- ST LINK USB V_BUS or external sources
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
Support of a wide choice of Integrated Development Environments (IDEs) including IAR^™ , Keil^® , GCC-based IDEs, Arm^® Mbed Enabled^™
Arm^® Mbed^™ online (see http://mbed.org)

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

00 选择要下载的文档

技术文档

产品规格

描述	版本	文档大小	操作
DB3159 STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud	2.0	214.09 KB	PDF
DB3232 STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud	4.0	166.57 KB	PDF
DB2891 STM32Cube function pack for IoT sensor node with telemetry and device management applications for Microsoft Azure cloud	7.0	342.36 KB	PDF

DB3159

STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud

PDF

DB3232

STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud

PDF

DB2891

STM32Cube function pack for IoT sensor node with telemetry and device management applications for Microsoft Azure cloud

PDF

用户手册

描述	版本	文档大小	操作
UM2153 Discovery kit for IoT node, multi-channel communication with STM32L4	5.0	1.87 MB	PDF
UM2135 Discovery kit with STM32F413ZH MCU	1.0	1.76 MB	PDF
UM2242 STM32Cube的Microsoft® Azure IoT云软件扩展入门	1.0	859.23 KB	PDF
UM2096 Getting started with ST25DV-DISCOVERY	2.0	1.6 MB	PDF
UM2178 Getting started with X-CUBE-AWS STM32Cube Expansion Package for Amazon Web Services® IoT	2.0	1.39 MB	PDF
UM2347 Getting started with X-CUBE-CLD-GEN IoT cloud generic software expansion for STM32Cube	2.0	2.08 MB	PDF
UM2273 面向STM32Cube的X-CUBE-WATSON IBM® IoT云软件扩展入门	1.0	1.15 MB	PDF
UM2186 Getting started with the FP-CLD-AWS1 software package for IoT node with Wi-Fi, cellular modem module and sensors, connected to Amazon AWS IoT cloud	3.0	3.36 MB	PDF
UM2043 Getting started with the FP-CLD-AZURE1 software for IoT node with Wi-Fi, NFC, sensors and motor control, connected to Microsoft Azure IoT	7.0	2.09 MB	PDF
UM2130 Getting started with the STM32Cube function pack for IoT node with Ethernet/Wi-Fi, NFC and sensors for vibration analysis connected with IBM Watson IoT Cloud	2.0	1.83 MB	PDF
UM2262 X-CUBE-SBSFU STM32Cube扩展包入门	1.0	1.99 MB	PDF

UM2153

Discovery kit for IoT node, multi-channel communication with STM32L4

PDF

UM2135

Discovery kit with STM32F413ZH MCU

PDF

UM2242

STM32Cube的Microsoft® Azure IoT云软件扩展入门

PDF

UM2096

Getting started with ST25DV-DISCOVERY

PDF

UM2178

Getting started with X-CUBE-AWS STM32Cube Expansion Package for Amazon Web Services® IoT

PDF

UM2347

Getting started with X-CUBE-CLD-GEN IoT cloud generic software expansion for STM32Cube

PDF

UM2273

面向STM32Cube的X-CUBE-WATSON IBM® IoT云软件扩展入门

PDF

UM2186

Getting started with the FP-CLD-AWS1 software package for IoT node with Wi-Fi, cellular modem module and sensors, connected to Amazon AWS IoT cloud

PDF

UM2043

Getting started with the FP-CLD-AZURE1 software for IoT node with Wi-Fi, NFC, sensors and motor control, connected to Microsoft Azure IoT

PDF

UM2130

Getting started with the STM32Cube function pack for IoT node with Ethernet/Wi-Fi, NFC and sensors for vibration analysis connected with IBM Watson IoT Cloud

PDF

UM2262

X-CUBE-SBSFU STM32Cube扩展包入门

PDF

演示和培训资料

简报

描述	版本	文档大小	操作
FP-CLD-AWS1 quick start guide	2.1	5.55 MB	PDF
FP-CLD-AZURE1 quick start guide	3.3	4.84 MB	PDF
FP-CLD-WATSON1 Quick start guide	2.4	3.26 MB	PDF
IoT: Cloud Connectivity Expansion Packages for STM32Cube	1.0	895.03 KB	PDF
STM32 and STM8 embedded software solutions	7.0	3.12 MB	PDF

FP-CLD-AWS1 quick start guide

PDF

FP-CLD-AZURE1 quick start guide

PDF

FP-CLD-WATSON1 Quick start guide

PDF

IoT: Cloud Connectivity Expansion Packages for STM32Cube

PDF

STM32 and STM8 embedded software solutions

PDF

出版刊物和宣传资料

宣传册

	描述	版本	文档大小	操作
	STM32Cube eases STM32 development	18.12	1.13 MB	PDF

STM32Cube eases STM32 development

PDF

手册

描述	版本	文档大小	操作
STM32 32-bit MCU family - Leading supplier of Arm® Cortex®-M microcontrollers	18.02	2.06 MB	PDF
STM32 Open Development Environment Brochure	17.09	1.21 MB	PDF
STM32L series - Ultra-low-power 32-bit MCUs	18.11	3.86 MB	PDF

STM32 32-bit MCU family - Leading supplier of Arm® Cortex®-M microcontrollers

PDF

STM32 Open Development Environment Brochure

PDF

STM32L series - Ultra-low-power 32-bit MCUs

PDF

软件

MCU 及 MPU嵌入式软件

Part number	制造商	描述
FP-CLD-AWS1	ST	STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud
FP-CLD-AZURE1	ST	STM32Cube function pack for IoT sensor node with telemetry and device management applications for Microsoft Azure cloud
FP-CLD-WATSON1	ST	STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud
X-CUBE-AWS	ST	AWS IoT software expansion for STM32Cube (UM2178)
X-CUBE-AZURE	ST	Microsoft Azure software expansion for STM32Cube
X-CUBE-CLD-GEN	ST	Generic IoT cloud software expansion for STM32Cube
X-CUBE-SBSFU	ST	Secure boot & secure firmware update software expansion for STM32Cube
X-CUBE-WATSON	ST	IBM Watson software expansion for STM32Cube

产品型号

FP-CLD-AWS1

STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud

FP-CLD-AZURE1

STM32Cube function pack for IoT sensor node with telemetry and device management applications for Microsoft Azure cloud

FP-CLD-WATSON1

STM32Cube function pack for IoT node with Wi-Fi, NFC and sensors for vibration analysis, connected to IBM Watson IoT Cloud

X-CUBE-AWS

AWS IoT software expansion for STM32Cube (UM2178)

X-CUBE-AZURE

Microsoft Azure software expansion for STM32Cube

X-CUBE-CLD-GEN

Generic IoT cloud software expansion for STM32Cube

X-CUBE-SBSFU

Secure boot & secure firmware update software expansion for STM32Cube

X-CUBE-WATSON

IBM Watson software expansion for STM32Cube

ST25 - NFC / RFID Software

Part number	制造商	描述
STSW-ST25001	ST	Application executable of the "NFC Tap" Android app for ST25 product family
STSW-ST25DV001	ST	Firmware for ST25DV-DISCOVERY kit
STSW-ST25IOS001	ST	Application executable of the "NFC Tap" iOS app for ST25 product family
STSW-ST25SDK001	ST	Software Development Kit for ST25 Tags and Dynamic Tags