蓝牙低能耗

主要特性

• Bluetooth® SMART board based on the BlueNRG-MS low energy network processor
• STM32L external microcontroller
• Associated BlueNRG-MS development kit, including documentation, firmware for STM32L and GUI
• Maximum transmission power +8 dBm
• Excellent receiver sensitivity (-88 dBm)
• Very low power consumption: 7.3 mA RX and 8.3 mA TX at +0 dBm
• Bluetooth® low energy 4.1 compliant, supports both master and slave roles
• iTunes app available (app name: BlueNRG)
• Google Play app available (app name: BlueNRG)
• JTAG debug connector
• USB Interface
• RoHS compliant

Show More

主要特性

• STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
• X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
• SPBTLE-RF:
  • Bluetooth Low Energy FCC and IC certified module based on Bluetooth^® SMART 4.1 network processor BlueNRG-MS
  • Integrated Balun (BALF-NRG-01D3)
  • Chip antenna
• Compatible with STM32 Nucleo boards
• Equipped with Arduino UNO R3 connector
• Scalable solution, capable of cascading multiple boards for larger systems
• Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
• RoHS compliant

Show More

主要特性

• LED driver main features
  • 10 W flyback converter with quasi-resonant operation
  • Primary side regulation, no optocoupler required
  • High power factor and low THD
  • Open/short LED management
  • ±1% LED current regulation
  • Dimming range: 2.5% to 100%
• BLE connectivity main features
  • Works with Android App - Smart Home Lighting
  • Allows lamp remote power-on / power-off
  • Allows lamp remote dimming
• Standby power consumption: <0.5 W
• RoHS compliant

Show More

主要特性

• Compact solution for wearable, motion sensing applications with a complete set of firmware examples
• iOS and Android apps available
• Main components:
  • STM32L151VEY6 – 32-bit ultra-low-power MCU
  • LSM6DS3 – 3D accelerometer + 3D gyroscope
  • LIS3MDL – 3-axis magnetometer
  • LPS25HB – MEMS pressure sensor
  • BlueNRG-MS – BLE network processor
  • BALF-NRG-01D3 - 50 Ω balun with integrated harmonic filter
  • STNS01 – Li-Ion linear battery charger
  • STC3115 – Fuel gauge IC
• 100 mAh Li-Ion battery included, UN38.3 tested and certified
• Micro USB connector for recharging
• SWD connector for debugging and programming capability
• Watch strap with plastic housing included
• Fully tested and certified by FCC (FCC ID: S9N-WESU1) and IC (IC: 8976C-WESU1)
• RoHS compliant

Show More

主要特性

• Included in the development kit package:
  • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
  • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
  • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
  • 100 mAh Li-Ion battery
  • Plastic box
  • SWD programming cable
• Software libraries and tools
  • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
  • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
  • STBLESensor: iOS and Android demo Apps
  • BlueST-SDK: iOS and Android Software Development Kit
• CE certified
• RoHS and China RoHS compliant
• WEEE compliant
• FCC (ID: S9NSTILE01) certified
• IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
• TYPE certified (006-000482)

Show More

主要特性

• Contains FCC ID: S9NBCOIN01
• Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
• The development kit package includes:
  • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
  • CoinStation (STEVAL-BCNST01V1) board
  • BlueCoin Cradle (STEVAL-BCNCR01V1)
  • 130 mAh Li-Po battery
  • Plastic box for housing the BlueCoin cradle and the battery
  • SWD programming cable
• Software libraries and tools:
  • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
  • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
  • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
  • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
  • STBLESensor: iOS™ and Android™ demo apps
  • BlueST-SDK: iOS and Android software development kit
  • Compatible with STM32 ecosystem through STM32Cube support

Show More

主要特性

• Bluetooth^® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
• Associated BlueNRG-1 development kit SW package including firmware and documentation
• Up to +5 dBm available output power
• Bluetooth^® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
• Integrated balun which integrates a matching network and harmonics filter
• SMA connector for antenna or measuring equipment
• 3 user LEDs
• 2 user buttons
• 3D digital accelerometer and 3D digital gyroscope
• MEMS pressure sensor with embedded temperature sensor
• Battery holder
• JTAG debug connector
• USB to serial bridge for providing I/O channel with the BlueNRG-1 device
• Jumper for measuring current for BlueNRG-1 only
• RoHS compliant

Show More

主要特性

• Bluetooth^® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
• On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
  • an ultra-low power ARM^® Cortex^® -M0 32-bit core architecture
  • programmable embedded 160 KB Flash
  • 24 KB embedded RAM with data retention
• On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
• On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
• Voltage supply: 1V8 or 3V3
• Battery or USB powered
• 100 mAh Li-Ion battery
• On-board STBC08 linear Li-Ion battery charger
• SWD connector
• Included in the development kit package:
  • STEVAL-BLUEMIC-1
  • Plastic box for housing STEVAL-BLUEMIC-1
  • 100 mAh Li-Ion battery
  • SWD programming cable
• SW development kit for audio and inertial MEMS data streaming over BLE
• ST BlueMS: Android and iOS demo App available in the respective stores
• CE certified
• RoHS and China RoHS compliant
• Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
• Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

主要特性

• Bluetooth^® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
• Associated BlueNRG-1 development kit SW package including firmware and documentation
• Up to +8 dBm available output power (at antenna connector)
• Excellent receiver sensitivity (-88 dBm)
• Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
• Bluetooth^® low energy compliant, supports master, slave and simultaneous master-and-slave roles
• New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
• SMA connector for antenna or measuring equipment
• 3 user LEDs
• 2 user buttons
• 3D digital accelerometer and 3D digital gyroscope
• MEMS pressure sensor with embedded temperature sensor
• Battery holder
• JTAG debug connector
• USB to serial bridge for providing I/O channel with the BlueNRG-1 device
• Jumper for measuring current for BlueNRG-1 only
• RoHS compliant

Show More

主要特性

• Compact flight controller unit (FCU) evaluation board complete with sample firmware for a small or medium sized quadcopter
• On-board LiPo 1-cell battery charger
• Possibility to directly drive 4 DC brushed motors through the low voltage on-board MOSFET or alternatively use external ESC for DC brushless motor configuration
• Main components:
  • STM32F401 – 32-bit MCU with ARM^® Cortex^®
  • LSM6DSL – iNEMO intertial module: 3D accelerometer and 3D gyroscope
  • LIS2MDL – High performance 3D magnetometer
  • LPS22HD – MEMS pressure sensor: 260-1260 hPa absolute digital output barometer
  • SPBTLE-RF – Very low power module for Bluetooth Smart v4.1
  • STL6N3LLH6 - N-channel 30 V, 6 A STripFET H6 Power MOSFET
  • STC4054 - 800 mA standalone linear Li-Ion battery charger
• RoHS compliant
• WEEE compliant

Show More

主要特性

• Bluetooth^® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
• Associated BlueNRG-2 development kit SW package including firmware and documentation
• Up to +8 dBm available output power (at antenna connector)
• Excellent receiver sensitivity (-88 dBm)
• Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
• Bluetooth^® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
• New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
• SMA connector for antenna or measuring equipment
• 3 user LEDs
• 2 user buttons
• 3D digital accelerometer and 3D digital gyroscope
• MEMS pressure sensor with embedded temperature sensor
• RoHS compliant

Show More

主要特性

• Nucleo68
  • STM32WB microcontroller in a VFQFPN68 package
  • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.0 and IEEE 802.15.4-2011 PHY and MAC
  • Dedicated Arm® 32-bit Cortex® M0+ CPU for real-time Radio layer
  • Three user LEDs
  • Three user buttons and one reset button
  • Board connector: USB user with Micro-B
  • Board expansion connectors:
    • Arduino™ Uno V3
    • ST morpho
  • Integrated PCB antenna or footprint for SMA connector
  • Flexible power-supply options: ST-LINK USB VBUS or external sources
  • On-board socket for CR2032 battery
  • On-board ST-LINK/V2-1 debugger/programmer with USB re- enumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package
  • Support of a wide choice of Integrated Development Environments (IDEs), including IAR™, Keil®, GCC-based IDEs, Arm® Mbed™
• USB dongle
  • STM32WB microcontroller in UFQFPN48 package
  • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.0 and IEEE 802.15.4-2011 PHY and MAC
  • Dedicated Arm® 32-bit Cortex® M0+ CPU for real-time Radio layer
  • Switch for boot management
  • User push button
  • Three user LEDs
  • Integrated PCB antenna or UFL connector

Show More

主要特性

• Smart Energy Meter design with wireless connectivity
• BLE (Bluetooth Low Energy) v4.2 connectivity for control and metering panel: Smart-phone connectivity for energy consumption dashboard, control of appliances
• Dimming: Some loads can be controlled. For example, AC Induction fan speed, Heaters, Incandescent lamps
• Scheduling: Set the time of day for ON or OFF of the load
• NFC interface: To configure the design, store the logs (connector for adapter board)
• Rated voltage: 240 VAC (typ.)
• Rated current: 12 A (typ.)
• Power consumption of plug: 1.6 W (max.)
• Instantaneous and averaged power
• RMS and instantaneous voltage and current
• Radio certifications:
  • FCC certified: S9NSPBTLE1S
  • IC certified: 8976C-SPBTLE1S
• CE certified
• RoHS and China RoHS compliant

Show More

主要特性

• STEVAL-BCN002V1B evaluation kit with STEVAL-BCN002V1 sensor board and STEVAL-BCN002V1D programming board.
• STEVAL-BCN002V1 sensor board:
  • BlueNRG-2: Bluetooth Low Energy single-mode system-on-chip
  • BALF-NRG-02D3: ultra-miniature balun and harmonic filter
  • LSM6DSO: iNEMO 6DoF inertial module, ultra-low power and high accuracy
  • LIS2MDL: magnetic sensor, digital output, 50 gauss magnetic field dynamic range, ultra-low power, high performance, 3-axis magnetometer
  • VL53L1X: long range Time-of-Flight sensor based on ST FlightSense technology
  • MP34DT05TR-A: MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
  • LPS22HH: ultra-compact piezo-resistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold dust resistant, holed LGA package (HLGA)
  • HTS221: capacitive digital sensor for relative humidity and temperature
  • CR2032 battery powered (not included)
• STEVAL-BCN002V1D programming board:
  • program and debug firmware running on sensor board
  • supply power to the sensor board
• ST BLE Sensor app available on Android (Google Play) and iOS (iTunes)
• Target Applications:
  • Internet of Things, Smart Building, Home and City
  • Tracking System, Supply Chain/ Cold-Chain Management
  • Smart Agriculture (soil control, animal activity tracking, etc.)

Show More

主要特性

• Bluetooth^® low energy technology board based on the BlueNRG-248 (QFN48) ultra-low-power system on chip
• Associated BlueNRG-2 development kit SW package including firmware and documentation
• Up to +8 dBm available output power (at antenna connector)
• Excellent receiver sensitivity (-88 dBm)
• Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
• Bluetooth^® low energy technology v5.0 compliant: supports master, slave, simultaneous master-and-slave roles, and the Bluetooth low energy extended data length feature
• SMA connector for antenna or measuring equipment
• 3 user LEDs
• 2 user buttons
• 3D digital accelerometer and 3D digital gyroscope
• MEMS pressure sensor
• WEEE compliant
• RoHS compliant

Show More