概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始
产品型号
描述
STEVAL-FKI512V1 Sub-1GHz (452-527 MHz) transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 452-527 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +15 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.1 to 500 kbps
  • Ultra-low power consumption:
    • 7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

X-NUCLEO-S2868A1 Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo Quick view

Key Features

  • Based on S2-LP radio
  • S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860 - 940 MHz frequency band
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
  • Air data rate from 0.1 to 500 kbps
  • Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm
  • IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection
  • RX and TX 128 byte FIFO buffers
  • Support to wireless M-Bus
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • Compatible with STM32 Nucleo boards
  • Compatible with Arduino UNO R3 connectors
  • Support to SMD and SMA antennas
  • BALF-SPI2-01D3 IPD balun for matching network and harmonics filter
  • Sigfox compatible
  • Sample firmware for P2P communication
  • 6LoWPAN compatible thanks to STM32Cube
  • RoHS compliant

Show More

STEVAL-FKI433V2 Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI868V2 Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI001V1 Dual radio BLE and Sub-1GHz development kit for Sigfox™ and LPWAN protocols with BlueNRG-1 and S2-LP Quick view

Key Features

  • WS2118-00 Sigfox™ BLE module (Jorjin):
    • Embedded BlueNRG-132 Bluetooth low energy SOC based on ultra-low power Arm® Cortex® -M0 (up to +8 dBm BLE RF output power, excellent receiver sensitivity -88 dBm)
    • Embedded S2-LPQTR ultra-low power sub-1 GHz transceiver tuned for 826-958 MHz frequency bands (up to +16 dBm sub-1GHz RF output power, excellent receiver sensitivity down to -130 dBm, modulation schemes: 2-(G)FSK, 4-(G)FSK, OOK, and ASK, air data rate from 0.1 to 500 kbps, ultra-low power consumption: (7 mA RX, 10 mA TX @ +10 dBm ), low duty cycle RX/TX operation mode, automatic acknowledgement, retransmission, and timeout protocol engine)
    • BALF-NRG-01D3 50 Ω integrated balun, matching network and harmonics filter companion device of BlueNRG-1
    • Low power and wide supply voltage range: 2.0 to 3.6 V
    • Dimensions: 22 mm(l) x 24 mm(w) x 2.8 mm(h)
    • Operating temperature range: -40 °C to +85 °C
    • U.FL RF interface connectors
  • USB interface
  • Arduino™ Uno V3 connectors
  • JTAG debug connectors
  • Antennas: 2.4 GHz and Sub-1 GHz
  • USB cable
  • RoHS compliant and China RoHS compliant
  • CE compliant
  • WEEE compliant

Show More

STEVAL-FKI915V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

B-L475E-IOT01A STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi Quick view

Key Features

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

STEVAL-FKI868V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power sub-1 GHz transceiver in a standalone RF Module tuned for 860 - 940 MHz frequency bands
  • STM32 Nucleo development board with STM32L152RE MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX / TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI433V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

Key Features

  • S2-LP narrow band ultra-low power sub-1 GHz transceiver in a standalone RF Module tuned for 430 - 470 MHz frequency bands
  • STM32 Nucleo 64 development board with STM32L152RE MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX / TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-ILL082V1 Smart home lighting based on HVLED815PF and SPSGRF Quick view

Key Features

  • LED driver features:
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open circuit and short-circuit LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • Sub-GHz connectivity features:
    • Works with the bundled STEVAL-ILL082V1_remote controller based on SP1ML-868 sub-GHz module
    • Allows remote lamp powering on and off
    • Allows lamp remote dimming
    • Standby power consumption: < 0.5 W
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5 Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo Quick view

Key Features

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4 Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo Quick view

Key Features

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IKR002V4B SPIRIT1 - low data rate transceiver - 868 MHz - DAUGHTER BOARD - integrated balun Quick view

Key Features

  • SPIRIT1 low power, sub-GHz transceiver in a standalone RF module tuned for the 868/915 MHz bands
  • External balun + matching + filter in a single component: BALF-SPI-01D3
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 development kit includes documentation, firmware for STM32L and GUI
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V7D SPIRIT1 - Low Data Rate Transceiver - 169 MHz - DAUGHTER BOARD - range extender Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 169 MHz, with external Skyworks® front-end module (SKY66100-11)
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Maximum output power: +27 dBm
  • Excellent receiver sensitivity (-123 dBm)
  • Suitable for wireless M-BUS applications
  • Meets the tight narrow-band system requirements
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V5D SPIRIT1 - Low Data Rate Transceiver - 915 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 915 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.8 mA RX and 20 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -108 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V4D SPIRIT1 - Low Data Rate Transceiver - 868 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 868 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Suitable for wireless M-BUS applications
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.7 mA RX and 21 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -119 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V3D SPIRIT1 - Low Data Rate Transceiver - 433 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 433 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Suitable for wireless M-BUS applications
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2mA RX and 19.5 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V2D SPIRIT1 - Low Data Rate Transceiver - 315 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 315 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK,GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2 mA RX and 22 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -110 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V1D SPIRIT1 - Low Data Rate Transceiver - 169 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 169 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2 mA RX and 18 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -123 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V5 SPIRIT1 - Low Data Rate Transceiver - 915 MHz - FULL KIT Quick view

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 915 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V4 SPIRIT1 - Low Data Rate Transceiver - 868 MHz - FULL KIT Quick view

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 868 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V3 SPIRIT1 - Low Data Rate Transceiver - 433 MHz - FULL KIT Quick view

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 433 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V1 SPIRIT1 - Low Data Rate Transceiver - 169 MHz - FULL KIT Quick view

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 169 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V5 SPIRIT1 - Low Data Rate Transceiver - 915 MHz - USB dongle Quick view

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 915 MHz band
  • STM32L microcontroller
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V4 SPIRIT1 - Low Data Rate Transceiver - 868 MHz - USB dongle Quick view

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 868 MHz band
  • STM32L microcontroller
  • Suitable for Wireless M-BUS systems
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V3 SPIRIT1 - Low Data Rate Transceiver - 433 MHz - USB dongle Quick view

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 868 MHz band
  • STM32L microcontroller
  • Suitable for Wireless M-BUS systems
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V2 SPIRIT1 - Low Data Rate Transceiver - 315 MHz - USB dongle Quick view

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • STM32L microcontroller
  • External components tuned for 315 MHz band
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V2D SPIRIT1 - Low Data Rate Transceiver - 315 MHz - DAUGHTER BOARD Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 315 MHz band
  • Associated SPIRIT1 development kit, including documentation, firmware for STM32L and GUI
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption: 9 mA RX and 21 mA TX at +11 dBm
  • Excellent receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V8D SPIRIT1- low data rate transceiver - 868 MHz - DAUGHTER BOARD - range extender Quick view

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 868 MHz band with external power amplifier
  • Associated SPIRIT1 development kit, including documentation, firmware for STM32L and GUI
  • Suitable for wireless M-BUS systems
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • TCXO for narrow band requirements
  • Max POUT +27 dBm
  • Excellent receiver sensitivity (up to -123 dBm)
  • TX power consumption @ +27 dBm: 350 mA
  • SAW filter in reception path to prevent interference from out-of-band signals
  • SkyWorks® SEXXXXSL power amplifier
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, re-transmission and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V2 SPIRIT1 - Low Data Rate Transceiver - 315 MHz - FULL KIT Quick view

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 315 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

产品型号
STEVAL-FKI512V1

Sub-1GHz (452-527 MHz) transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 452-527 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +15 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.1 to 500 kbps
  • Ultra-low power consumption:
    • 7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

X-NUCLEO-S2868A1

Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

Key Features

  • Based on S2-LP radio
  • S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860 - 940 MHz frequency band
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
  • Air data rate from 0.1 to 500 kbps
  • Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm
  • IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection
  • RX and TX 128 byte FIFO buffers
  • Support to wireless M-Bus
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • Compatible with STM32 Nucleo boards
  • Compatible with Arduino UNO R3 connectors
  • Support to SMD and SMA antennas
  • BALF-SPI2-01D3 IPD balun for matching network and harmonics filter
  • Sigfox compatible
  • Sample firmware for P2P communication
  • 6LoWPAN compatible thanks to STM32Cube
  • RoHS compliant

Show More

STEVAL-FKI433V2

Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI001V1

Dual radio BLE and Sub-1GHz development kit for Sigfox™ and LPWAN protocols with BlueNRG-1 and S2-LP

Key Features

  • WS2118-00 Sigfox™ BLE module (Jorjin):
    • Embedded BlueNRG-132 Bluetooth low energy SOC based on ultra-low power Arm® Cortex® -M0 (up to +8 dBm BLE RF output power, excellent receiver sensitivity -88 dBm)
    • Embedded S2-LPQTR ultra-low power sub-1 GHz transceiver tuned for 826-958 MHz frequency bands (up to +16 dBm sub-1GHz RF output power, excellent receiver sensitivity down to -130 dBm, modulation schemes: 2-(G)FSK, 4-(G)FSK, OOK, and ASK, air data rate from 0.1 to 500 kbps, ultra-low power consumption: (7 mA RX, 10 mA TX @ +10 dBm ), low duty cycle RX/TX operation mode, automatic acknowledgement, retransmission, and timeout protocol engine)
    • BALF-NRG-01D3 50 Ω integrated balun, matching network and harmonics filter companion device of BlueNRG-1
    • Low power and wide supply voltage range: 2.0 to 3.6 V
    • Dimensions: 22 mm(l) x 24 mm(w) x 2.8 mm(h)
    • Operating temperature range: -40 °C to +85 °C
    • U.FL RF interface connectors
  • USB interface
  • Arduino™ Uno V3 connectors
  • JTAG debug connectors
  • Antennas: 2.4 GHz and Sub-1 GHz
  • USB cable
  • RoHS compliant and China RoHS compliant
  • CE compliant
  • WEEE compliant

Show More

STEVAL-FKI915V1

Sub-1GHz transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

B-L475E-IOT01A

STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

Key Features

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

STEVAL-FKI868V1

Sub-1GHz transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power sub-1 GHz transceiver in a standalone RF Module tuned for 860 - 940 MHz frequency bands
  • STM32 Nucleo development board with STM32L152RE MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX / TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI433V1

Sub-1GHz transceiver development kit based on S2-LP

Key Features

  • S2-LP narrow band ultra-low power sub-1 GHz transceiver in a standalone RF Module tuned for 430 - 470 MHz frequency bands
  • STM32 Nucleo 64 development board with STM32L152RE MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX / TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-ILL082V1

Smart home lighting based on HVLED815PF and SPSGRF

Key Features

  • LED driver features:
    • 10 W flyback converter with quasi-resonant operation
    • Primary side regulation, no optocoupler required
    • High power factor and low THD
    • Open circuit and short-circuit LED management
    • ±1% LED current regulation
    • Dimming range: 2.5% to 100%
  • Sub-GHz connectivity features:
    • Works with the bundled STEVAL-ILL082V1_remote controller based on SP1ML-868 sub-GHz module
    • Allows remote lamp powering on and off
    • Allows lamp remote dimming
    • Standby power consumption: < 0.5 W
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5

Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo

Key Features

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4

Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo

Key Features

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IKR002V4B

SPIRIT1 - low data rate transceiver - 868 MHz - DAUGHTER BOARD - integrated balun

Key Features

  • SPIRIT1 low power, sub-GHz transceiver in a standalone RF module tuned for the 868/915 MHz bands
  • External balun + matching + filter in a single component: BALF-SPI-01D3
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 development kit includes documentation, firmware for STM32L and GUI
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V7D

SPIRIT1 - Low Data Rate Transceiver - 169 MHz - DAUGHTER BOARD - range extender

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 169 MHz, with external Skyworks® front-end module (SKY66100-11)
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Maximum output power: +27 dBm
  • Excellent receiver sensitivity (-123 dBm)
  • Suitable for wireless M-BUS applications
  • Meets the tight narrow-band system requirements
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V5D

SPIRIT1 - Low Data Rate Transceiver - 915 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 915 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.8 mA RX and 20 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -108 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V4D

SPIRIT1 - Low Data Rate Transceiver - 868 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 868 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Suitable for wireless M-BUS applications
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.7 mA RX and 21 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -119 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V3D

SPIRIT1 - Low Data Rate Transceiver - 433 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 433 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Suitable for wireless M-BUS applications
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2mA RX and 19.5 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V2D

SPIRIT1 - Low Data Rate Transceiver - 315 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 315 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK,GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2 mA RX and 22 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -110 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V1D

SPIRIT1 - Low Data Rate Transceiver - 169 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 169 MHz
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Programmable air data rate: from 1 to 500 kbps
  • Very low power consumption: 9.2 mA RX and 18 mA TX at +11 dBm
  • Excellent receiver sensitivity (down to -123 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V5

SPIRIT1 - Low Data Rate Transceiver - 915 MHz - FULL KIT

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 915 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V4

SPIRIT1 - Low Data Rate Transceiver - 868 MHz - FULL KIT

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 868 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V3

SPIRIT1 - Low Data Rate Transceiver - 433 MHz - FULL KIT

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 433 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR002V1

SPIRIT1 - Low Data Rate Transceiver - 169 MHz - FULL KIT

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 169 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V5

SPIRIT1 - Low Data Rate Transceiver - 915 MHz - USB dongle

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 915 MHz band
  • STM32L microcontroller
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V4

SPIRIT1 - Low Data Rate Transceiver - 868 MHz - USB dongle

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 868 MHz band
  • STM32L microcontroller
  • Suitable for Wireless M-BUS systems
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V3

SPIRIT1 - Low Data Rate Transceiver - 433 MHz - USB dongle

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • External components tuned for 868 MHz band
  • STM32L microcontroller
  • Suitable for Wireless M-BUS systems
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IDS001V2

SPIRIT1 - Low Data Rate Transceiver - 315 MHz - USB dongle

Key Features

  • SPIRIT1 low power sub-GHz transceiver integrated in a USB dongle for direct PC connection
  • STM32L microcontroller
  • External components tuned for 315 MHz band
  • Associated SPIRIT1 development kit includes: documentation, firmware for STM32L and GUI
  • Optional debug connector (not mounted)
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate: from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent receiver sensitivity performance (up to -118 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V2D

SPIRIT1 - Low Data Rate Transceiver - 315 MHz - DAUGHTER BOARD

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 315 MHz band
  • Associated SPIRIT1 development kit, including documentation, firmware for STM32L and GUI
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption: 9 mA RX and 21 mA TX at +11 dBm
  • Excellent receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V8D

SPIRIT1- low data rate transceiver - 868 MHz - DAUGHTER BOARD - range extender

Key Features

  • SPIRIT1 low power sub GHz transceiver in a standalone RF module tuned for 868 MHz band with external power amplifier
  • Associated SPIRIT1 development kit, including documentation, firmware for STM32L and GUI
  • Suitable for wireless M-BUS systems
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • TCXO for narrow band requirements
  • Max POUT +27 dBm
  • Excellent receiver sensitivity (up to -123 dBm)
  • TX power consumption @ +27 dBm: 350 mA
  • SAW filter in reception path to prevent interference from out-of-band signals
  • SkyWorks® SEXXXXSL power amplifier
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgment, re-transmission and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

STEVAL-IKR001V2

SPIRIT1 - Low Data Rate Transceiver - 315 MHz - FULL KIT

Key Features

  • 2 SPIRIT1 low power, sub-GHz RF transceiver daughterboards tuned for the 315 MHz band
  • 2 STM32L microcontroller-based motherboards
  • Suitable for wireless M-BUS systems
  • Associated SPIRIT1 software development kit with documentation, STM32L firmware and GUI
  • Debug connector
  • USB interface
  • Modulation schemes: 2-FSK, GFSK, MSK, GMSK, OOK, and ASK
  • Air data rate from 1 to 500 kbps
  • Very low power consumption (9 mA RX and 21 mA TX at +11 dBm)
  • Excellent performance of receiver sensitivity (up to -120 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • AES 128-bit encryption co-processor
  • SPI interface for microcontroller
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4190
      天线选择指南
      1.0
      1.39 MB
      PDF
      AN2348
      IPAD™ 400 µm Flip Chip: package description and recommendations for use
      5.0
      261.7 KB
      PDF
      AN4193
      Low duty cycle operation with the SPIRIT1 transceiver
      2.0
      225.38 KB
      PDF
      AN4947
      PCB design guidelines for the S2-LP transceiver
      2.0
      1.07 MB
      PDF
      AN4169
      PCB design guidelines for the SPIRIT1 transceiver
      2.0
      652.41 KB
      PDF
      AN4962
      S2-LP ETSI compliance test at 868 MHz SRD band
      1.0
      1.8 MB
      PDF
      AN4198
      SPIRIT1: increasing the output power
      1.0
      387.86 KB
      PDF
      AN4953
      Using the S2-LP transceiver under ARIB STD-T108 in the 920 MHz band
      1.0
      4.23 MB
      PDF
      AN4997
      Using the S2-LP transceiver under FCC Title 47 Part 15 in the 430 - 470 MHz band
      1.0
      847.96 KB
      PDF
      AN4949
      Using the S2-LP transceiver under FCC title 47 part 15 in the 902 – 928 MHz band
      1.0
      1.92 MB
      PDF
      AN5009
      Using the S2-LP transceiver under FCC title 47 part 90 in the 450 - 470 MHz band
      1.0
      938.24 KB
      PDF
      AN5008
      Using the S2-LP transceiver under the ARIB STD-T67 standard
      1.0
      871.54 KB
      PDF
      AN5029
      Using the S2-LP transceiver with FEM at 500 mW under FCC title 47 part 15 in the 902 – 928 MHz band
      1.0
      2.46 MB
      PDF
      AN4133
      Using the SPIRIT1 transceiver under ARIB STD-T108 in the 920 MHz band
      1.1
      1.54 MB
      PDF
      AN4148
      Using the SPIRIT1 transceiver under ARIB STD-T93 in the 315 MHz band
      1.1
      1.3 MB
      PDF
      AN4103
      Using the SPIRIT1 transceiver under EN 300 220 at 169 MHz
      1.0
      2.25 MB
      PDF
      AN4117
      Using the SPIRIT1 transceiver under EN 300 220 at 434 MHz
      1.0
      1.88 MB
      PDF
      AN4110
      Using the SPIRIT1 transceiver under EN 300 220 at 868 MHz
      1.0
      1 MB
      PDF
      AN4147
      Using the SPIRIT1 transceiver under FCC title 47 part 15 in the 315 MHz band
      1.1
      831.13 KB
      PDF
      AN4126
      Using the SPIRIT1 transceiver under FCC title 47 part 15 in the 902 – 928 MHz band
      1.1
      4.52 MB
      PDF
      AN4174
      Using the SPIRIT1 transceiver under the ARIB STD-T67 standard in the 426 MHz band
      1.0
      2 MB
      PDF
      AN4305
      Using the SPIRIT1 transceiver with range extender under EN 300 220 at 169 MHz
      1.0
      1.84 MB
      PDF
      AN4271
      Using the SPIRIT1 transceiver with range extender under EN 300 220 at 868 MHz
      1.0
      1.88 MB
      PDF
      AN4190

      天线选择指南

      AN2348

      IPAD™ 400 µm Flip Chip: package description and recommendations for use

      AN4193

      Low duty cycle operation with the SPIRIT1 transceiver

      AN4947

      PCB design guidelines for the S2-LP transceiver

      AN4169

      PCB design guidelines for the SPIRIT1 transceiver

      AN4962

      S2-LP ETSI compliance test at 868 MHz SRD band

      AN4198

      SPIRIT1: increasing the output power

      AN4953

      Using the S2-LP transceiver under ARIB STD-T108 in the 920 MHz band

      AN4997

      Using the S2-LP transceiver under FCC Title 47 Part 15 in the 430 - 470 MHz band

      AN4949

      Using the S2-LP transceiver under FCC title 47 part 15 in the 902 – 928 MHz band

      AN5009

      Using the S2-LP transceiver under FCC title 47 part 90 in the 450 - 470 MHz band

      AN5008

      Using the S2-LP transceiver under the ARIB STD-T67 standard

      AN5029

      Using the S2-LP transceiver with FEM at 500 mW under FCC title 47 part 15 in the 902 – 928 MHz band

      AN4133

      Using the SPIRIT1 transceiver under ARIB STD-T108 in the 920 MHz band

      AN4148

      Using the SPIRIT1 transceiver under ARIB STD-T93 in the 315 MHz band

      AN4103

      Using the SPIRIT1 transceiver under EN 300 220 at 169 MHz

      AN4117

      Using the SPIRIT1 transceiver under EN 300 220 at 434 MHz

      AN4110

      Using the SPIRIT1 transceiver under EN 300 220 at 868 MHz

      AN4147

      Using the SPIRIT1 transceiver under FCC title 47 part 15 in the 315 MHz band

      AN4126

      Using the SPIRIT1 transceiver under FCC title 47 part 15 in the 902 – 928 MHz band

      AN4174

      Using the SPIRIT1 transceiver under the ARIB STD-T67 standard in the 426 MHz band

      AN4305

      Using the SPIRIT1 transceiver with range extender under EN 300 220 at 169 MHz

      AN4271

      Using the SPIRIT1 transceiver with range extender under EN 300 220 at 868 MHz

    • 描述 版本 文档大小 操作
      DT0067
      Running a simple 6LowPAN network consisting of one receiver node and one or more sensor nodes in a Sub-1GHz RF band
      1.1
      281.18 KB
      PDF
      DT0067

      Running a simple 6LowPAN network consisting of one receiver node and one or more sensor nodes in a Sub-1GHz RF band

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器 3.0
      824.66 KB
      PDF

      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器

软件

EMI Filtering and Signal Conditioning

Part number 描述
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
BALF-SPI-02D3 50Ω / Conjugate match to SPIRIT1 433MHz Balun Transformer & Integrated Filtering
BALF-SPI2-01D3 50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
BALF-SPI2-02D3 50 Ω nominal input / conjugate match balun to S2-LP, 433 - 470 MHz with integrated harmonic filter
Part number
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
50Ω / Conjugate match to SPIRIT1 433MHz Balun Transformer & Integrated Filtering
50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP, 433 - 470 MHz with integrated harmonic filter

无线收发器、MCU、模块

Part number 描述
S2-LP Ultra-low power, high performance, sub-1GHz transceiver
SPIRIT1 Low data rate, low power Sub 1GHz transceiver
SPSGRFC Sub1GHz (433, 868 or 915 MHz) programmable transceiver module with ufl connector
Part number
Ultra-low power, high performance, sub-1GHz transceiver
Low data rate, low power Sub 1GHz transceiver
Sub1GHz (433, 868 or 915 MHz) programmable transceiver module with ufl connector