概观
解决方案
HW Evaluation Tools
资源
工具和软件
Key Products
开始

Air Quality within a home or commercial building can be far worse than that outdoors as there might be higher concentrations of Volatile Organic Chemicals (VOCs), carbon dioxide (CO2) and monoxide (CO) and particles. Monitoring those parameters as well as relative humidity and temperature, can provide alerts to occupants and turn on systems that could improve air quality including air purifiers, ionization conditioning and dehumidifiers.

We have a wide offer of ultra-low power STM32L 32 bits microcontrollers and ultra-low power wireless connectivity solutions – including Bluetooth low energy and sub-GHz - as well as cloud connectivity sw packages, temperature, humidity and proximity sensors and high precision operational amplifier for chemical sensors signal conditioning.

In addition we provide a comprehensive set of HW and SW evaluation and development tools to help design ultra-low power.

型号
Description
STEVAL-ISB035V1 Li-Ion/Li-Po battery power management evaluation board based on STBC03 Quick view

主要特性

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 650 mA
  • Pre-charge current programmable from 1 mA to 650 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-ON low quiescent LDO regulator
  • Battery overcharge and over-discharge protections
  • Overcurrent protection
  • Shipping mode entry and exit inputs
  • Integrated dual 3 Ω SPDT load switches
  • Digital control inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA055V1 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX Quick view

主要特性

  • RDS(on) typ. 250 m and 400 m
  • Not switching quiescent current: max 600 μA over temperature range
  • Uses tiny capacitors and inductors
  • Internal soft-start
  • Enable function
  • Step-down current mode PWM (1.7 MHz) DCDC converter
  • 0.7 A output current capability
  • Fixed output voltage of 1.2 V
  • Synchronous rectification
  • Typical efficiency: > 90%
  • 3% DC output voltage tolerance

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1 Li-Ion/Li-Po battery power management evaluation board based on STBC02 Quick view

主要特性

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA141V1 2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J Quick view

主要特性

  • Input voltage range from 1.8 V to 5.5 V
  • 2 A output current at 3.3 V in buck mode (VIN = 3.6 V to 5.5 V)
  • 800 mA output current at 3.3 V in boost mode (VIN 2.0 V)
  • Typical efficiency higher than 94%
  • ±2% DC feedback voltage tolerance
  • Automatic transition between step-down and boost mode
  • Adjustable output voltage from 1.2 V to 5.5 V
  • Power save mode (PS) at light load
  • 2.0 MHz fixed switching frequency
  • Adjustable switching frequency up to 2.4 MHz (external synchronous square signal)
  • Device quiescent current less than 50 µA
  • Load disconnect during shutdown
  • Shutdown and soft-start functions
  • Shutdown current <1 A
  • Available in Flip-Chip 20, pitch = 0.4 mm
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY Discovery kit for the M24SR series - Dynamic NFC/RFID tag Quick view

主要特性

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

主要特性

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

主要特性

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

主要特性

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
型号
STEVAL-ISB035V1

Li-Ion/Li-Po battery power management evaluation board based on STBC03

主要特性

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 650 mA
  • Pre-charge current programmable from 1 mA to 650 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-ON low quiescent LDO regulator
  • Battery overcharge and over-discharge protections
  • Overcurrent protection
  • Shipping mode entry and exit inputs
  • Integrated dual 3 Ω SPDT load switches
  • Digital control inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA055V1

0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX

主要特性

  • RDS(on) typ. 250 m and 400 m
  • Not switching quiescent current: max 600 μA over temperature range
  • Uses tiny capacitors and inductors
  • Internal soft-start
  • Enable function
  • Step-down current mode PWM (1.7 MHz) DCDC converter
  • 0.7 A output current capability
  • Fixed output voltage of 1.2 V
  • Synchronous rectification
  • Typical efficiency: > 90%
  • 3% DC output voltage tolerance

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1

Li-Ion/Li-Po battery power management evaluation board based on STBC02

主要特性

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

主要特性

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA141V1

2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J

主要特性

  • Input voltage range from 1.8 V to 5.5 V
  • 2 A output current at 3.3 V in buck mode (VIN = 3.6 V to 5.5 V)
  • 800 mA output current at 3.3 V in boost mode (VIN 2.0 V)
  • Typical efficiency higher than 94%
  • ±2% DC feedback voltage tolerance
  • Automatic transition between step-down and boost mode
  • Adjustable output voltage from 1.2 V to 5.5 V
  • Power save mode (PS) at light load
  • 2.0 MHz fixed switching frequency
  • Adjustable switching frequency up to 2.4 MHz (external synchronous square signal)
  • Device quiescent current less than 50 µA
  • Load disconnect during shutdown
  • Shutdown and soft-start functions
  • Shutdown current <1 A
  • Available in Flip-Chip 20, pitch = 0.4 mm
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

主要特性

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

主要特性

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

主要特性

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

主要特性

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

技术文档

    • Description 版本 文档大小 Action
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN4433
      将数据存入M24SR 的NDEF 存储器
      1.0
      523.66 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN576

      PCB layout optimisation

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN4433

      将数据存入M24SR 的NDEF 存储器

      AN316

      Transil™ clamping protection mode

演示和培训资料

    • Description 版本 文档大小 Action
      EEPROM 2 Mbit highest density memories 1.0
      2.49 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF

      EEPROM 2 Mbit highest density memories

      ST25DV-I2C product presentation

出版刊物和宣传资料

    • Description 版本 文档大小 Action
      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator 04.2017
      730.72 KB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.28 MB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      519.6 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5 1.1
      265.36 KB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      527.9 KB
      PDF

      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator

      NFC / RFID tags M24SR series

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5

      Ultra-low clamping voltage 0201 ESD diodes

    • Description 版本 文档大小 Action
      EEPROM selection guide 2.0
      1,007.87 KB
      PDF
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      EEPROM selection guide

      Linear and Switching Voltage Regulators Selection Guide

    • Description 版本 文档大小 Action
      电源管理 2017版指南 09.2017
      4.42 MB
      PDF
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      Power management for handheld and portable 2.0
      1.09 MB
      PDF

      电源管理 2017版指南

      NFC solutions from ST

      Power management for handheld and portable

Design Tools

    • 型号

      Transient voltage suppressor smart selection tool

开发工具硬件

    • 型号

      Protection product finder application for Android and iOS

软件

    • 型号

      STM32Cube expansion software for X-NUCLEO-NFC01A1

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

    • 型号

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Software Development Kit for ST25 Tags and Dynamic Tags

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Audio ICs

Part number Description
MP34DT05-A MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
Part number
MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI2-01D3 50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter

MEMS and Sensors

Part number Description
HTS221 Capacitive digital sensor for relative humidity and temperature
STTS751 2.25 V low-voltage local digital temperature sensor
Part number
Capacitive digital sensor for relative humidity and temperature
2.25 V low-voltage local digital temperature sensor

电源管理

Part number Description
LD39020 200 mA very low quiescent current Linear regulator IC
LD39130S 300 mA very low quiescent current Linear regulator IC with automatic Green mode
LDK120 200 mA low quiescent current very low noise LDO
LDK130 300 mA low quiescent current very low noise LDO
STBC02 Li-Ion linear battery charger with LDO, load switches and reset generator
STBC03 Li-Ion linear battery charger with LDO and load switches
STLQ020 200 mA ultra-low quiescent current LDO
STNS01 Li-Ion Linear Battery Charger with LDO
STP4CMP Low voltage 4-channel constant current LED driver with charge pump
Part number
200 mA very low quiescent current Linear regulator IC
300 mA very low quiescent current Linear regulator IC with automatic Green mode
200 mA low quiescent current very low noise LDO
300 mA low quiescent current very low noise LDO
Li-Ion linear battery charger with LDO, load switches and reset generator
Li-Ion linear battery charger with LDO and load switches
200 mA ultra-low quiescent current LDO
Li-Ion Linear Battery Charger with LDO
Low voltage 4-channel constant current LED driver with charge pump

Power Transistors

Part number Description
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL160N4F7 N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
Part number
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package

Protection Devices

Part number Description
ESDA25P35-1U1M High-power transient voltage suppressor (TVS)
SMAJ 400 W TVS in SMA
Part number
High-power transient voltage suppressor (TVS)
400 W TVS in SMA

Wireless Transceivers, MCUs and Modules

Part number Description
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
Part number
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1