Fire Alarm and Smoke Detector

Search History

Please log in to show your saved searches.

概观

解决方案

HW Evaluation Tools

资源

工具和软件

Key Products

开始

Quick links

Inside any building and home, fire alarm and smoke detectors systems are vital safety feature. They becoming more sophisticated, incorporating more sensors to detect not only smoke and fire but also monitoring the quality of the air.

These devices can alert individuals and authorities quicker, reducing the alert time and avoid property damage and casualties and they are dependent on very low power as high power means higher costs and more frequent maintenance both in a residential home and in a commercial building.

STMicroelectronics provides system level know-how and offers a complete set of semiconductor products to implement any smart alarm devices, thanks to complete range of precise sensors, ultra-low power solutions also for wireless connectivity, optimizing and drastically reducing energy consumption.

MEMS Microphones

RTC-Serial Interface

Standard Serial EEPROM

Low Iq LDO Regulators

型号	Description
STEVAL-FET001V1	M41T62LC6F adapter board for a standard DIL 24 socket	Quick view 主要特性 Complete M41T62LC6F pinout (I²C interface) for a standard DIL 24 socket RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISB035V1	Li-Ion/Li-Po battery power management evaluation board based on STBC03	Quick view 主要特性 Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination Fast charge current programmable from 1 mA to 650 mA Pre-charge current programmable from 1 mA to 650 mA Adjustable floating voltage up to 4.45 V Integrated always-ON low quiescent LDO regulator Battery overcharge and over-discharge protections Overcurrent protection Shipping mode entry and exit inputs Integrated dual 3 Ω SPDT load switches Digital control inputs RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISA055V1	0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX	Quick view 主要特性 R_DS(on) typ. 250 m and 400 m Not switching quiescent current: max 600 μA over temperature range Uses tiny capacitors and inductors Internal soft-start Enable function Step-down current mode PWM (1.7 MHz) DCDC converter 0.7 A output current capability Fixed output voltage of 1.2 V Synchronous rectification Typical efficiency: > 90% 3% DC output voltage tolerance Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISB041V1	Li-Ion/Li-Po battery power management evaluation board based on STBC02	Quick view 主要特性 Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination Fast charge current programmable from 1 mA to 450 mA Pre-charge current programmable from 1 mA to 450 mA Adjustable floating voltage up to 4.45 V Integrated always-on low quiescent LDO regulator Battery over-charge and over-discharge protections Overcurrent protection Shipping mode exit input Integrated dual 3 Ω SPDT load switches Integrated smart reset / watchdog logic Single wire control interface RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-LDO001V1	Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020	Quick view 主要特性 Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages Key features: Low operating input voltage (from 1.4 V to 5.5 V) Current capability from 200 mA to 300 mA Low dropout (down to 160 mV typ.) Ultra-low quiescent current (down to 500 nA typ.) Low noise (down to 6.5 μVRMS typ.) High PSSR (up to 80 dB) Logic controlled electronic shutdown (enable) Tiny packages (DFN-6L, Flip-chip, ST STAMP™) RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISA141V1	2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J	Quick view 主要特性 Input voltage range from 1.8 V to 5.5 V 2 A output current at 3.3 V in buck mode (V_IN = 3.6 V to 5.5 V) 800 mA output current at 3.3 V in boost mode (V_IN 2.0 V) Typical efficiency higher than 94% ±2% DC feedback voltage tolerance Automatic transition between step-down and boost mode Adjustable output voltage from 1.2 V to 5.5 V Power save mode (PS) at light load 2.0 MHz fixed switching frequency Adjustable switching frequency up to 2.4 MHz (external synchronous square signal) Device quiescent current less than 50 µA Load disconnect during shutdown Shutdown and soft-start functions Shutdown current <1 A Available in Flip-Chip 20, pitch = 0.4 mm RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
ST25-TAG-BAG-A	The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM	Quick view 主要特性 ST25TA02K with a wet inlay 10*17 mm2 copper antenna ST25TA02K with a wet inlay aluminum antenna ST25TA02K with round- and square-stickers aluminum antennas ST25TA64K with a PET card ST25TA64K with a water-proof tag Show More Product Details Download databrief IMAGE
CLOUD-ST25TA02KB	Evaluation board for ST25TA series	Quick view 主要特性 Ready-to-use printed circuit board with ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package 19 mm2 single layer inductive antenna, etched on the PCB Contactless interface TruST25™ digital signature NFC Forum Type 4 Tag ISO/IEC 14443 Type A 106 kbps data rate Internal 50 pF tuning capacitance, enabling design of small inductive antennas Memory 256 Byte (2 Kbit) EEPROM with NDEF data support 200-year data retention 1 million erase-write cycles endurance 128-bit password data protection 20-bit event counter for read or write access with anti-tearing feature Digital pad Configurable general purpose output (GPO) indicating, for example, RF field detection Show More Product Details Download databrief IMAGE FEATURED RESOURCES BOM Gerber
X-NUCLEO-NFC04A1	Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo	Quick view 主要特性 Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo Up to 4-Kbit memory with NDEF support 54 mm diameter, single layer circular antenna Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connector Self-powered or powered through the Arduino™ UNO R3 connectors Three general purpose LEDs Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware FCC and IC verified RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-NFC01A1	Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo	Quick view 主要特性 M24SR64-Y Dynamic NFC/RFID tag IC NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Powered through the Arduino UNO R3 connectors 3 color LEDs for general purpose Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber

型号

STEVAL-FET001V1

M41T62LC6F adapter board for a standard DIL 24 socket

Quick view

STEVAL-ISB035V1

Li-Ion/Li-Po battery power management evaluation board based on STBC03

Quick view

主要特性

Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
Fast charge current programmable from 1 mA to 650 mA
Pre-charge current programmable from 1 mA to 650 mA
Adjustable floating voltage up to 4.45 V
Integrated always-ON low quiescent LDO regulator
Battery overcharge and over-discharge protections
Overcurrent protection
Shipping mode entry and exit inputs
Integrated dual 3 Ω SPDT load switches
Digital control inputs
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISA055V1

0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX

Quick view

主要特性

R_DS(on) typ. 250 m and 400 m
Not switching quiescent current: max 600 μA over temperature range
Uses tiny capacitors and inductors
Internal soft-start
Enable function
Step-down current mode PWM (1.7 MHz) DCDC converter
0.7 A output current capability
Fixed output voltage of 1.2 V
Synchronous rectification
Typical efficiency: > 90%
3% DC output voltage tolerance

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISB041V1

Li-Ion/Li-Po battery power management evaluation board based on STBC02

Quick view

主要特性

Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
Fast charge current programmable from 1 mA to 450 mA
Pre-charge current programmable from 1 mA to 450 mA
Adjustable floating voltage up to 4.45 V
Integrated always-on low quiescent LDO regulator
Battery over-charge and over-discharge protections
Overcurrent protection
Shipping mode exit input
Integrated dual 3 Ω SPDT load switches
Integrated smart reset / watchdog logic
Single wire control interface
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

Quick view

主要特性

Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
Key features:
- Low operating input voltage (from 1.4 V to 5.5 V)
- Current capability from 200 mA to 300 mA
- Low dropout (down to 160 mV typ.)
- Ultra-low quiescent current (down to 500 nA typ.)
- Low noise (down to 6.5 μVRMS typ.)
- High PSSR (up to 80 dB)
- Logic controlled electronic shutdown (enable)
- Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISA141V1

2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J

Quick view

主要特性

Input voltage range from 1.8 V to 5.5 V
2 A output current at 3.3 V in buck mode (V_IN = 3.6 V to 5.5 V)
800 mA output current at 3.3 V in boost mode (V_IN 2.0 V)
Typical efficiency higher than 94%
±2% DC feedback voltage tolerance
Automatic transition between step-down and boost mode
Adjustable output voltage from 1.2 V to 5.5 V
Power save mode (PS) at light load
2.0 MHz fixed switching frequency
Adjustable switching frequency up to 2.4 MHz (external synchronous square signal)
Device quiescent current less than 50 µA
Load disconnect during shutdown
Shutdown and soft-start functions
Shutdown current <1 A
Available in Flip-Chip 20, pitch = 0.4 mm
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

ST25-TAG-BAG-A

The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM

Quick view

CLOUD-ST25TA02KB

Evaluation board for ST25TA series

Quick view

主要特性

Ready-to-use printed circuit board with
- ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
- 19 mm2 single layer inductive antenna, etched on the PCB
Contactless interface
- TruST25™ digital signature
- NFC Forum Type 4 Tag
- ISO/IEC 14443 Type A
- 106 kbps data rate
- Internal 50 pF tuning capacitance, enabling design of small inductive antennas
Memory
- 256 Byte (2 Kbit) EEPROM with NDEF data support
- 200-year data retention
- 1 million erase-write cycles endurance
- 128-bit password data protection
- 20-bit event counter for read or write access with anti-tearing feature
Digital pad
- Configurable general purpose output (GPO) indicating, for example, RF field detection

Product Details Download databrief

IMAGE

FEATURED RESOURCES

BOM Gerber

X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Quick view

主要特性

Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
Up to 4-Kbit memory with NDEF support
54 mm diameter, single layer circular antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino™ UNO R3 connector
Self-powered or powered through the Arduino™ UNO R3 connectors
Three general purpose LEDs
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
FCC and IC verified
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Quick view

主要特性

M24SR64-Y Dynamic NFC/RFID tag IC
NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
Powered through the Arduino UNO R3 connectors
3 color LEDs for general purpose

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

00 Files selected for download

技术文档

应用手册

Description	版本	文档大小	Action
AN5085 Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process	2.0	306.83 KB	PDF
AN4653 Cycling endurance and data retention of high density EEPROM based on CMOS F8H process	1.0	267.34 KB	PDF
AN4910 Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx	1.0	585.2 KB	PDF
AN4913 Energy harvesting delivery impact on ST25DVxxx behavior during RF communication	1.0	1.05 MB	PDF
AN2866 How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags	3.0	615.85 KB	PDF
AN2972 How to design an antenna for dynamic NFC tags	9.0	1.59 MB	PDF
AN934 How to use the digital calibration feature in TIMEKEEPER® and serial real-time clock (RTC) products	4.1	123.42 KB	PDF
AN1216 Implementing a periodic alarm with TIMEKEEPER® and serial real-time clocks (RTCs)	2.0	192.89 KB	PDF
AN923 Managing century information using serial real-time clocks and TIMEKEEPER® NVRAMs	4.0	142.23 KB	PDF
AN4911 NDEF management with ST25DVxxx and ST25TVxxx products	4.0	460.67 KB	PDF
AN576 PCB layout optimisation	3.0	109.53 KB	PDF
AN5046 Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages	4.0	4.82 MB	PDF
AN1019 Second source for SNAPHAT® using a dual footprint	2.1	66.19 KB	PDF
AN4433 将数据存入M24SR 的NDEF 存储器	1.0	523.66 KB	PDF
AN316 Transil™ clamping protection mode	4.3	432.1 KB	PDF

AN5085

Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

Part number	Description
M41T0	Serial real-time clock (RTC)
M41T80	Serial real-time clock (RTC) with alarm

Part number	Description
BALF-NRG-02D3	50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3	50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
BALF-SPI2-01D3	50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter

Part number	Description
VL53L0X	World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X	Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

Part number	Description
HTS221	Capacitive digital sensor for relative humidity and temperature
STTS751	2.25 V low-voltage local digital temperature sensor

Part number	Description
LD39020	200 mA very low quiescent current Linear regulator IC
LD39130S	300 mA very low quiescent current Linear regulator IC with automatic Green mode
LDK120	200 mA low quiescent current very low noise LDO
LDK130	300 mA low quiescent current very low noise LDO
ST1S12XX	Synchronous rectification with inhibit, 0.7 A, 1.7 MHz adjustable, step-down switching regulator
STBC02	Li-Ion linear battery charger with LDO, load switches and reset generator
STBC03	Li-Ion linear battery charger with LDO and load switches
STLQ020	200 mA ultra-low quiescent current LDO
STNS01	Li-Ion Linear Battery Charger with LDO

Part number	Description
STL11N3LLH6	N-channel 30 V, 6 mOhm typ., 11 A STripFET H6 Power MOSFET in a PowerFLAT(TM) 3.3 x 3.3 package
STL20N6F7	N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL36DN6F7	Dual N-channel 60 V, 0.023 Ohm typ., 36 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island package

Part number	Description
ESDA25P35-1U1M	High-power transient voltage suppressor (TVS)
ESDA7P120-1U1M	High-power transient voltage supressor (TVS)
SMAJ	400 W TVS in SMA

Part number	Description
S2-LP	Ultra-low power, high performance, sub-1GHz transceiver
SPIRIT1	Low data rate, low power Sub 1GHz transceiver
SPSGRF	Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
STS1TX	Low data rate, low power sub-1GHz transmitter

Part number	制造商	Description
STSW-ST25001	ST	Application executable of the "NFC Tap" Android app for ST25 product family
STSW-ST25DV001	ST	Firmware for ST25DV-DISCOVERY kit
STSW-ST25IOS001	ST	Application executable of the "NFC Tap" iOS app for ST25 product family
STSW-ST25PC001	ST	Windows® PC software for ISO15693, ISO14443-A/B, NFC and industrial readers
STSW-ST25SDK001	ST	Software Development Kit for ST25 Tags and Dynamic Tags

Search History

收藏

精选 视频

技术文档

演示和培训资料

出版刊物和宣传资料

Design Tools

开发工具硬件

软件

eDesignSuite

Audio ICs

Clocks and Timers

EMI Filtering and Signal Conditioning

Imaging and Photonics Solutions

MEMS and Sensors

电源管理

Power Transistors

Protection Devices

Wireless Transceivers, MCUs and Modules

精选视频