在拥挤的市区停放汽车或商用车辆可能是一场噩梦，而且还会浪费时间和能源并增加二氧化碳排放。智能停车系统可以帮助司机识别和预约空闲停车位，并通过手机App支付费用。
为了帮助设计智能停车系统，我们提供一系列距离和接近传感器、低功耗无线连接解决方案、支持轻松云连接的软件包、以及低功耗STM32微控制器。
精选 视频
Introduction to surges – EOS and ESD – definition, standards, effects and root cause
-
- This ST IoT Solution can be used to create a gateway that aggregates Smart Parking nodes on a 6LowPan 915MHz mesh network and bridge them via WiFi to the IBM Watson cloud. Device management of the sensor nodes is done in the cloud using a management protocol called LWM2M that allows configuration and monitoring of motion and proximity in applications such as Smart Appliances monitoring and control. Complete middleware to build applications to connect to Wi-Fi and IBM Watson cloud.
解决方案组件
产品型号 描述 状态 核心产品 价格 (US$)* 订购 / 下载全部购买NUCLEO-F401RE 主要特性
- Common features
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity 批量生产STM32F401RE 12.74 立即购买 X-NUCLEO-IDW01M1 主要特性
- X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
- SPWF01SA module major characteristics:
- low power IEEE 802.11 b/g/n transceiver
- integrated SMD antenna
- STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
- 1 MByte extended flash for FW update over the air (FOTA)
- integrated protocol stacks: TCP/IP, TLS/SSL
- application layer functions: web server supporting dynamic web pages, REST API to get & post web content
- WEP/WPA/WPA2 personal security
- system modes: station, IBSS, and miniAP
- 16 configurable GPIOs available
- simple AT command set host interface through UART
- compatible with STM32 Nucleo boards
- equipped both with ST morpho connector and Arduino UNO R3 connectors
- scalable solution; it can cascade multiple boards for larger systems
- free development firmware library and examples, compatible with STM32Cube
- RoHS compliant
Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo NRNDSPWF01SA 22.05 立即购买 X-NUCLEO-IDS01A5 主要特性
- STM32 Nucleo expansion board based on the SPSGRF-915
- X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
- SPGRF-915:
- 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
- Integrated Balun (BALF-SPI-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connectors
- Scalable solution; can cascade multiple boards for larger systems
- Example firmware for point-to-point communication, compatible with STM32Cube firmware
- RoHS compliant
Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo 批量生产SPSGRF-915 14.70 立即购买 X-NUCLEO-6180XA1 主要特性
- VL6180X proximity, gesture and ambient light sensing (ALS) module.
- Slider switch controlling 2 functions:
- Ranging measurement, beyond 400mm.
- Ambient light sensing, up to 100 kLux1.
- 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
- Excellent ranging accuracy, independent of the reflectance of the target.
- In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
- Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
- Basic gesture recognition application can be developed with one or multiple VL6180X modules.
- Compatible with STM32 Nucleo board family.
- Equipped with ArduinoTM UNO R3 connector.
- RoHS compliant.
- Full system SW supplied, download from www.st.com/vl6180x.
特色资源
GerberProximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo 批量生产VL6180X 20.83 立即购买 FP-NET-6LPWIFI1 主要特性
- Complete firmware to connect 6LoWPAN and Wi-Fi networks
- Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
- Support for mesh networking technology via the standard RPL protocol
- Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
- Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
- Easy portability across different MCU families, thanks to STM32Cube
- Free, user-friendly license terms
STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 批量生产- 产品型号 供应商 下载 FP-NET-6LPWIFI1 ST FP-NET-6LPWIFI1Description:
STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network价格 (US$)*
-产品型号 供应商 下载 FP-NET-6LPWIFI1 ST - Common features
-
-
- This ST IoT Solution can be used to create a gateway that aggregates Smart Parking nodes on a 6LowPan 868MHz mesh network and bridge them via WiFi to the IBM Watson cloud. Device management of the sensor nodes is done in the cloud using a management protocol called LWM2M that allows configuration and monitoring of motion and proximity in applications such as Smart Appliances monitoring and control. Complete middleware to build applications to connect to Wi-Fi and IBM Watson cloud.
解决方案组件
产品型号 描述 状态 核心产品 价格 (US$)* 订购 / 下载全部购买NUCLEO-F401RE 主要特性
- Common features
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity 批量生产STM32F401RE 12.74 立即购买 X-NUCLEO-IDW01M1 主要特性
- X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
- SPWF01SA module major characteristics:
- low power IEEE 802.11 b/g/n transceiver
- integrated SMD antenna
- STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
- 1 MByte extended flash for FW update over the air (FOTA)
- integrated protocol stacks: TCP/IP, TLS/SSL
- application layer functions: web server supporting dynamic web pages, REST API to get & post web content
- WEP/WPA/WPA2 personal security
- system modes: station, IBSS, and miniAP
- 16 configurable GPIOs available
- simple AT command set host interface through UART
- compatible with STM32 Nucleo boards
- equipped both with ST morpho connector and Arduino UNO R3 connectors
- scalable solution; it can cascade multiple boards for larger systems
- free development firmware library and examples, compatible with STM32Cube
- RoHS compliant
Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo NRNDSPWF01SA 22.05 立即购买 X-NUCLEO-IDS01A4 主要特性
- STM32 Nucleo expansion board based on the SPSGRF-868
- SPGRF-868 characteristics:
- 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
- Integrated Balun (BALF-SPI-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connectors
- Scalable solution; capable of cascading multiple boards for larger systems
- Example firmware for point-to-point communication, compatible with STM32Cube firmware
- RoHS compliant
Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo 批量生产SPSGRF-868 14.70 立即购买 X-NUCLEO-6180XA1 主要特性
- VL6180X proximity, gesture and ambient light sensing (ALS) module.
- Slider switch controlling 2 functions:
- Ranging measurement, beyond 400mm.
- Ambient light sensing, up to 100 kLux1.
- 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
- Excellent ranging accuracy, independent of the reflectance of the target.
- In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
- Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
- Basic gesture recognition application can be developed with one or multiple VL6180X modules.
- Compatible with STM32 Nucleo board family.
- Equipped with ArduinoTM UNO R3 connector.
- RoHS compliant.
- Full system SW supplied, download from www.st.com/vl6180x.
特色资源
GerberProximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo 批量生产VL6180X 20.83 立即购买 FP-NET-6LPWIFI1 主要特性
- Complete firmware to connect 6LoWPAN and Wi-Fi networks
- Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
- Support for mesh networking technology via the standard RPL protocol
- Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
- Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
- Easy portability across different MCU families, thanks to STM32Cube
- Free, user-friendly license terms
STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 批量生产- 产品型号 供应商 下载 FP-NET-6LPWIFI1 ST FP-NET-6LPWIFI1Description:
STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network价格 (US$)*
-产品型号 供应商 下载 FP-NET-6LPWIFI1 ST - Common features
-
