概观
解决方案
HW Evaluation Tools
资源
工具和软件
Key Products
开始

In window or roller shutters, key components are: the motor and the associated driving electronics that must provide high energy-efficiency and reliability, sensors to detect presence and improve safety and the remote control. The motor can be either AC – usually single phase induction motor – or low voltage 3-phase brushless or brushed DC type, fed through an AC-DC converter.

We offer a large selection of power MOSFETS, intelligent power modules (IPM) and triacs as well as gate drivers, monolithic motor drivers and STM32 32bits microcontrollers to help design efficient motor control solutions. In addition we provide power management, AC-DC Supply and sub-GHz wireless connectivity solutions with ranging and presence sensors.

To help developer reduce development times we provide a comprehensive set of HW and SW evaluation and development tools

window roller shutter block diagram

型号
Description
STEVAL-IHM032V1 150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control Quick view

主要特性

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM040V1 BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™ Quick view

主要特性

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM
STEVAL-IPMNM1N 60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET Quick view

主要特性

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM035V2 3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano) Quick view

主要特性

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM036V1 Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B Quick view

主要特性

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM021V2 100 W, 3-phase inverter based on L6390 and UltraFASTmesh™ MOSFET for speed FOC of 3-phase PMSM motor drive Quick view

主要特性

  • Wide range input voltage
  • Maximum power: up to 100 W at 230 Vac input
  • STD5N52U power MOSFET (4.4 A, 520 V)
  • Compatible with other power switches in DPAK packages (i.e. the STGD6NC60HD or STGDL6NC60DI)
  • 15 V auxiliary power supply connector
  • Motor control connector for interfacing with STM32-based control stages
  • Three shunt resistor-based motor current sensing network
  • Target applications: refrigerator compressors and dishwasher pumps
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM2N 100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET Quick view

主要特性

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM045V1 3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano) Quick view

主要特性

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 Quick view

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package Quick view

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14 Quick view

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25-TAG-BAG-A The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM Quick view

主要特性

  • ST25TA02K with a wet inlay 10*17 mm2 copper antenna
  • ST25TA02K with a wet inlay aluminum antenna
  • ST25TA02K with round- and square-stickers aluminum antennas
  • ST25TA64K with a PET card
  • ST25TA64K with a water-proof tag

Show More

IMAGE

Image
Image
ST25-TAG-BAG-E The ST25-TAG-BAG-E contains eight different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2-Kbit and 64-Kbit EEPROM Quick view

主要特性

  • ST25TA02K NFC seal
  • ST25TA02K NFC stickers
  • ST25TA02K key fob
  • ST25TA02K NFC bracelet
  • ST25TA64K NFC cards
  • ST25TA02K NFC Secure paper label

Show More

IMAGE

Image
Image
M24SR-DISCOVERY Discovery kit for the M24SR series - Dynamic NFC/RFID tag Quick view

主要特性

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

主要特性

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
CLOUD-ST25TA02KB Evaluation board for ST25TA series Quick view

主要特性

  • Ready-to-use printed circuit board with
    • ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
    • 19 mm2 single layer inductive antenna, etched on the PCB
  • Contactless interface
    • TruST25™ digital signature
    • NFC Forum Type 4 Tag
    • ISO/IEC 14443 Type A
    • 106 kbps data rate
    • Internal 50 pF tuning capacitance, enabling design of small inductive antennas
  • Memory
    • 256 Byte (2 Kbit) EEPROM with NDEF data support
    • 200-year data retention
    • 1 million erase-write cycles endurance
    • 128-bit password data protection
    • 20-bit event counter for read or write access with anti-tearing feature
  • Digital pad
    • Configurable general purpose output (GPO) indicating, for example, RF field detection

Show More

IMAGE

Image
Image

FEATURED RESOURCES

BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

主要特性

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

主要特性

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
型号
STEVAL-IHM032V1

150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control

主要特性

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM040V1

BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™

主要特性

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM
STEVAL-IPMNM1N

60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET

主要特性

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM035V2

3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)

主要特性

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM036V1

Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

主要特性

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM021V2

100 W, 3-phase inverter based on L6390 and UltraFASTmesh™ MOSFET for speed FOC of 3-phase PMSM motor drive

主要特性

  • Wide range input voltage
  • Maximum power: up to 100 W at 230 Vac input
  • STD5N52U power MOSFET (4.4 A, 520 V)
  • Compatible with other power switches in DPAK packages (i.e. the STGD6NC60HD or STGDL6NC60DI)
  • 15 V auxiliary power supply connector
  • Motor control connector for interfacing with STM32-based control stages
  • Three shunt resistor-based motor current sensing network
  • Target applications: refrigerator compressors and dishwasher pumps
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM2N

100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET

主要特性

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM045V1

3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)

主要特性

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA099V1

3 A step-down switching demonstration board based on the L7986 in DFN10 package

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA095V1

Up to 3 A step-down switching regulator based on the ST1S14

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25-TAG-BAG-A

The ST25-TAG-BAG-A contains six different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2- and 64-Kbit EEPROM

主要特性

  • ST25TA02K with a wet inlay 10*17 mm2 copper antenna
  • ST25TA02K with a wet inlay aluminum antenna
  • ST25TA02K with round- and square-stickers aluminum antennas
  • ST25TA64K with a PET card
  • ST25TA64K with a water-proof tag

Show More

IMAGE

Image
Image
ST25-TAG-BAG-E

The ST25-TAG-BAG-E contains eight different items based on ST25TA02K and ST25TA64K, two NFC Forum Type 4 Tag ICs with, respectively, 2-Kbit and 64-Kbit EEPROM

主要特性

  • ST25TA02K NFC seal
  • ST25TA02K NFC stickers
  • ST25TA02K key fob
  • ST25TA02K NFC bracelet
  • ST25TA64K NFC cards
  • ST25TA02K NFC Secure paper label

Show More

IMAGE

Image
Image
M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

主要特性

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

主要特性

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
CLOUD-ST25TA02KB

Evaluation board for ST25TA series

主要特性

  • Ready-to-use printed circuit board with
    • ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
    • 19 mm2 single layer inductive antenna, etched on the PCB
  • Contactless interface
    • TruST25™ digital signature
    • NFC Forum Type 4 Tag
    • ISO/IEC 14443 Type A
    • 106 kbps data rate
    • Internal 50 pF tuning capacitance, enabling design of small inductive antennas
  • Memory
    • 256 Byte (2 Kbit) EEPROM with NDEF data support
    • 200-year data retention
    • 1 million erase-write cycles endurance
    • 128-bit password data protection
    • 20-bit event counter for read or write access with anti-tearing feature
  • Digital pad
    • Configurable general purpose output (GPO) indicating, for example, RF field detection

Show More

IMAGE

Image
Image

FEATURED RESOURCES

BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

主要特性

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

主要特性

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

技术文档

    • Description 版本 文档大小 Action
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN4966
      Design guidelines for the shutdown function in the SLLIMM-nano series
      1.0
      1.54 MB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4544
      IGBT datasheet tutorial
      1.1
      2.4 MB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN4433
      将数据存入M24SR 的NDEF 存储器
      1.0
      523.66 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN4966

      Design guidelines for the shutdown function in the SLLIMM-nano series

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN4544

      IGBT datasheet tutorial

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN576

      PCB layout optimisation

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN4433

      将数据存入M24SR 的NDEF 存储器

      AN316

      Transil™ clamping protection mode

    • Description 版本 文档大小 Action
      TN1221
      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)
      1.0
      542.38 KB
      PDF
      TN1221

      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)

演示和培训资料

    • Description 版本 文档大小 Action
      ST PowerStudio overview 1.0
      1.81 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF

      ST PowerStudio overview

      ST25DV-I2C product presentation

出版刊物和宣传资料

    • Description 版本 文档大小 Action
      DC-DC converters
      557.92 KB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.28 MB
      PDF
      NFC /RFID tags ST25TA series 1.0
      1.36 MB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      519.6 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5 1.1
      265.36 KB
      PDF
      ST25TV series - Tags for Consumer Engagement flyer 1.1
      1.22 MB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      527.9 KB
      PDF

      DC-DC converters

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      NFC / RFID tags M24SR series

      NFC /RFID tags ST25TA series

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5

      ST25TV series - Tags for Consumer Engagement flyer

      Ultra-low clamping voltage 0201 ESD diodes

    • Description 版本 文档大小 Action
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      Protection devices and integrated EMI filtering selection guide 2.0
      743.69 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

      Protection devices and integrated EMI filtering selection guide

    • Description 版本 文档大小 Action
      电源管理 2017版指南 09.2017
      4.42 MB
      PDF
      Motor Control Reference Guide 15.10
      7.15 MB
      PDF
      NFC solutions from ST 1.0
      5.1 MB
      PDF

      电源管理 2017版指南

      Motor Control Reference Guide

      NFC solutions from ST

Design Tools

    • 型号

      Transient voltage suppressor smart selection tool

开发工具硬件

软件

    • 型号

      ST PowerStudio dynamic electrothermal simulation software for power devices

    • 型号

      STM32Cube expansion software for X-NUCLEO-NFC01A1

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

    • 型号

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Software Development Kit for ST25 Tags and Dynamic Tags

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
BALF-SPI2-01D3 50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter

Imaging and Photonics Solutions

Part number Description
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
Part number
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

Microcontrollers & Microprocessors

Part number Description
STM8S105S4 Mainstream Access line 8-bit MCU with 16 Kbytes Flash, 16 MHz CPU, integrated EEPROM
Part number
Mainstream Access line 8-bit MCU with 16 Kbytes Flash, 16 MHz CPU, integrated EEPROM

Motor Drivers

Part number Description
STSPIN32F0A Advanced BLDC controller with embedded STM32 MCU
Part number
Advanced BLDC controller with embedded STM32 MCU

电源管理

Part number Description
L6985F 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
L6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
L7985 2A step-down switching regulator
L7986 3A step-down switching regulator
LDF 1A Very low drop voltage regulator IC
LDFM 500 mA very low drop voltage regulator
LDK220 200 mA low quiescent current and low noise LDO
LDK320 200 mA low quiescent current and high PSRR voltage regulator
LDL212 1.2A Low Drop Linear Regulator IC
ST1S14 Up to 3 A step down switching regulator
ST1S40 3A DC step-down switching regulator
ST1S41 4 A step-down switching regulator
VIPER06 VIPerPlus family: Energy saving high voltage converter for direct feedback
VIPER16 VIPerPlus family: Energy saving 6W high voltage converter with direct feedback
VIPER37 VIPerPlus family: Fixed frequency 15W high performance off line high voltage converter
Part number
38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
2A step-down switching regulator
3A step-down switching regulator
1A Very low drop voltage regulator IC
500 mA very low drop voltage regulator
200 mA low quiescent current and low noise LDO
200 mA low quiescent current and high PSRR voltage regulator
1.2A Low Drop Linear Regulator IC
Up to 3 A step down switching regulator
3A DC step-down switching regulator
4 A step-down switching regulator
VIPerPlus family: Energy saving high voltage converter for direct feedback
VIPerPlus family: Energy saving 6W high voltage converter with direct feedback
VIPerPlus family: Fixed frequency 15W high performance off line high voltage converter

Power Transistors

Part number Description
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL160N4F7 N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
Part number
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package

Protection Devices

Part number Description
ESDA25P35-1U1M High-power transient voltage suppressor (TVS)
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
SMAJ 400 W TVS in SMA
Part number
High-power transient voltage suppressor (TVS)
High-power transient voltage supressor (TVS)
400 W TVS in SMA

Thyristors (SCR) and AC Switches

Part number Description
ACST1035-8FP Overvoltage protected 10 A 800 V AC switch
ACST1235-8FP Overvoltage protected AC switch
ACST1635-8FP Overvoltage protected AC switch
T1235H 12 A - 600 V - 150 °C H-series Triacs
T1635H 16 A - 600 V - 150 °C H-series Triacs
T2035H 20 A - 600 V - 150 °C H-series Triacs
T3035H 30 A - 600 V - 150 °C H-series Triacs
T835H 8 A - 600 V - 150°C H-series Triacs
Part number
Overvoltage protected 10 A 800 V AC switch
Overvoltage protected AC switch
Overvoltage protected AC switch
12 A - 600 V - 150 °C H-series Triacs
16 A - 600 V - 150 °C H-series Triacs
20 A - 600 V - 150 °C H-series Triacs
30 A - 600 V - 150 °C H-series Triacs
8 A - 600 V - 150°C H-series Triacs

Wireless Transceivers, MCUs and Modules

Part number Description
S2-LP Ultra-low power, high performance, sub-1GHz transceiver
SPIRIT1 Low data rate, low power Sub 1GHz transceiver
SPSGRF Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
STS1TX Low data rate, low power sub-1GHz transmitter
Part number
Ultra-low power, high performance, sub-1GHz transceiver
Low data rate, low power Sub 1GHz transceiver
Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
Low data rate, low power sub-1GHz transmitter