概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

3D打印具有低成本和易于使用(广泛的CAD软件可供选择)等特点,正迅速推广到商业和DIY用途,支持快速进行原型制作或小批量生产。

3D打印机是一个相当复杂的系统,在设计过程中面临不同挑战,具体取决于其指定用途(从消费级台式设备到工业用途)。

我们拥有广泛的功率MOSFET、提供专用的芯片和参考设计,及由测试过的,即用型的设计工具组成的完整的生态系统(评估板、开发环境、原理图、设计文件、软件示例等)。和高性能STM32微控制器组合(支持设计高性能电机控制解决方案),众多交流-直流(AC-DC)和直流-直流(DC-DC)电源管理和供电解决方案,一系列运动、环境和距离传感器与连接解决方案。此外,我们提供即用型硬件和软件评估与开发工具(包括参考设计),帮助缩短上市时间。

 

产品型号
描述
STEVAL-FKI433V2 Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-EFUSE01 Evaluation board based on the STEF01 fully programmable universal electronic fuse Quick view

主要特性

  • Input voltage from 8 to 48 V
  • Peak output current up to 6 A
  • Enable/Disable/Fault flag pin
  • Adjustable undervoltage lockout
  • Adjustable output voltage clamp
  • Programmable VOUT slew rate control
  • Latch or auto-retry jumper-programmable thermal protection
  • Power good monitoring flag
  • Drives an optional external reverse current protection MOSFET
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant (2012/19/UE RAEE II)

Show More

STEVAL-ILL021V1 LCD panels backlight demonstration board based on the LED7707 Quick view

主要特性

  • Features boost section4.5 V to 36 V input voltage rangeinternal power MOSFETinternal +5 V LDO for device supplyup to 36 V output voltageconstant frequency peak current-mode control250 kHz to 1 MHz adjustable switching frequencyexternal sync for multi-device applicationpulse-skip power saving mode at light loadprogrammable soft-startprogrammable OVP protectionsingle ceramic output capacitornon-latched thermal shutdown
  • RoHS compliant
  • Features backlight driver sectionsix rows with 85 mA maximum current capability (adjustable)up to 10 white LEDs per rowrows disable optionless than 10 μs minimum dimming time±2.0% current matching between rowsLED failure (open and short circuit) detection

Show More

STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14 Quick view

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package Quick view

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 Quick view

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-MKI141V2 HTS221 humidity sensor adapter board for standard DIL24 socket (full pinout) Quick view

主要特性

  • Complete HTS221 pinout (SPI & I²C interface) for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

X-NUCLEO-IHM01A1 Stepper motor driver expansion board based on L6474 for STM32 Nucleo Quick view

主要特性

  • Voltage range from 8 V to 45 V
  • Phase current up to 3 Ar.m.s.
  • Power OK and fault LEDs
  • Advanced current control
  • Fully protected power stage
  • Up to 1/16 microstepping resolution
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • Suitable for multi-motor solutions
  • RoHS compliant

Show More

STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

X-NUCLEO-IHM08M1 Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo Quick view

主要特性

  • 3-phase driver board for BLDC/PMSM motors
  • Nominal operating voltage range from 10 V to 48 V DC
  • 15 ARMS output current
  • Operating frequency selectable by firmware
  • Overcurrent detection and protection (30 Apeak )
  • Thermal monitoring and overheating protection
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connectors
  • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
  • Hall/Encoder motor sensor connector and circuit
  • Debug connector for DAC, GPIOs, etc.
  • Potentiometer available for speed regulation
  • User LED
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4 Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo Quick view

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5 Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo Quick view

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-3DP001V1 Evaluation board for 3D printer Quick view

主要特性

  • Ready for the next generation of 3D printers
    • Multiple extruders support (up to 3): 12 V; up to 8 A; temperature and fan control; LED display
    • Multiple peripheral support and easy interfacing
    • Hot chamber and multi-zone heating bed, with high power capability: 12 V or 24 V; up to 20 A; temperature control; LED display
  • High efficiency and small footprint thanks to low Rds(on) MOSFETs
  • Open source firmware available
  • Main peripherals supported:
    • USB and microSD modules embedded
    • WiFi module embedded with web server available
    • External LCD/keypad
  • Based on STSPIN L6474 stepper motor driver with unique features in terms of current control and protection (up to 6 axes; phase current up to 3 Ar.m.s ; micro-stepping digital end stop)
  • Integrated debug solution; STLINKV2 embedded
  • RoHS compliant

Show More

X-NUCLEO-LED16A1 16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo Quick view

主要特性

  • 16 constant current output channels
  • Output current: from 3 mA to 40 mA
  • 20 V current generator rated voltage
  • Provision for cascading multiple expansion boards
  • Current adjustment:
    • 7-bit global current gain adjustment in two ranges
    • Current programmable through external resistor
    • 12/16-bit PWM grayscale brightness control
  • Selectable LED Bus voltage supply
    • USB
    • Vexternal
  • Error detection
    • Open LED
    • Shorted LED
  • Thermal shutdown
  • Compatible with STM32 Nucleo board
  • Equipped with Arduino™ UNO R3 connector
  • RoHS compliant

Show More

STEVAL-FKI915V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

EVALSTDRV600HB8 Demonstration board kit for L638xE and L639x high-voltage gate drivers Quick view

主要特性

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

EVAL6498L Evaluation board for the L6498L gate driver Quick view

主要特性

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

EVAL6494L Demonstration board for L6494L gate driver Quick view

主要特性

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

EVALSP820-XS Compact evaluation board for STSPIN820 stepper motor driver Quick view

主要特性

  • Operating voltage: 7 V to 45 V
  • Continuous current up to 1.5 A per phase
  • Maximum current up to 2.5 A per phase
  • Integrated low RDS(ON) power stages (HS + LS = 1 Ω typ.)
  • Microstep resolution easily settable through jumpers: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step
  • Simple step and direction control interface
  • Adjustable current control through a potentiometer to set the ref. voltages
  • Embedded PWM current control with selectable decay mode (fast or slow)
  • Full set of embedded protections
    • Non-dissipative overcurrent
    • Undervoltage lockout
    • Thermal shutdown
    • Short-circuit
  • Compatible with RAMPS and similar open source solutions for FFF 3D printers
  • Very compact footprint: 15 x 20 mm

Show More

图片

Image
Image
STEVAL-FKI868V2 Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

产品型号
STEVAL-FKI433V2

Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-EFUSE01

Evaluation board based on the STEF01 fully programmable universal electronic fuse

主要特性

  • Input voltage from 8 to 48 V
  • Peak output current up to 6 A
  • Enable/Disable/Fault flag pin
  • Adjustable undervoltage lockout
  • Adjustable output voltage clamp
  • Programmable VOUT slew rate control
  • Latch or auto-retry jumper-programmable thermal protection
  • Power good monitoring flag
  • Drives an optional external reverse current protection MOSFET
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant (2012/19/UE RAEE II)

Show More

STEVAL-ILL021V1

LCD panels backlight demonstration board based on the LED7707

主要特性

  • Features boost section4.5 V to 36 V input voltage rangeinternal power MOSFETinternal +5 V LDO for device supplyup to 36 V output voltageconstant frequency peak current-mode control250 kHz to 1 MHz adjustable switching frequencyexternal sync for multi-device applicationpulse-skip power saving mode at light loadprogrammable soft-startprogrammable OVP protectionsingle ceramic output capacitornon-latched thermal shutdown
  • RoHS compliant
  • Features backlight driver sectionsix rows with 85 mA maximum current capability (adjustable)up to 10 white LEDs per rowrows disable optionless than 10 μs minimum dimming time±2.0% current matching between rowsLED failure (open and short circuit) detection

Show More

STEVAL-ISA095V1

Up to 3 A step-down switching regulator based on the ST1S14

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

STEVAL-ISA099V1

3 A step-down switching demonstration board based on the L7986 in DFN10 package

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-MKI141V2

HTS221 humidity sensor adapter board for standard DIL24 socket (full pinout)

主要特性

  • Complete HTS221 pinout (SPI & I²C interface) for a standard DIL 24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

X-NUCLEO-IHM01A1

Stepper motor driver expansion board based on L6474 for STM32 Nucleo

主要特性

  • Voltage range from 8 V to 45 V
  • Phase current up to 3 Ar.m.s.
  • Power OK and fault LEDs
  • Advanced current control
  • Fully protected power stage
  • Up to 1/16 microstepping resolution
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • Suitable for multi-motor solutions
  • RoHS compliant

Show More

STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

X-NUCLEO-IHM08M1

Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo

主要特性

  • 3-phase driver board for BLDC/PMSM motors
  • Nominal operating voltage range from 10 V to 48 V DC
  • 15 ARMS output current
  • Operating frequency selectable by firmware
  • Overcurrent detection and protection (30 Apeak )
  • Thermal monitoring and overheating protection
  • Compatible with STM32 Nucleo boards
  • Equipped with ST morpho connectors
  • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
  • Hall/Encoder motor sensor connector and circuit
  • Debug connector for DAC, GPIOs, etc.
  • Potentiometer available for speed regulation
  • User LED
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4

Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5

Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-3DP001V1

Evaluation board for 3D printer

主要特性

  • Ready for the next generation of 3D printers
    • Multiple extruders support (up to 3): 12 V; up to 8 A; temperature and fan control; LED display
    • Multiple peripheral support and easy interfacing
    • Hot chamber and multi-zone heating bed, with high power capability: 12 V or 24 V; up to 20 A; temperature control; LED display
  • High efficiency and small footprint thanks to low Rds(on) MOSFETs
  • Open source firmware available
  • Main peripherals supported:
    • USB and microSD modules embedded
    • WiFi module embedded with web server available
    • External LCD/keypad
  • Based on STSPIN L6474 stepper motor driver with unique features in terms of current control and protection (up to 6 axes; phase current up to 3 Ar.m.s ; micro-stepping digital end stop)
  • Integrated debug solution; STLINKV2 embedded
  • RoHS compliant

Show More

X-NUCLEO-LED16A1

16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo

主要特性

  • 16 constant current output channels
  • Output current: from 3 mA to 40 mA
  • 20 V current generator rated voltage
  • Provision for cascading multiple expansion boards
  • Current adjustment:
    • 7-bit global current gain adjustment in two ranges
    • Current programmable through external resistor
    • 12/16-bit PWM grayscale brightness control
  • Selectable LED Bus voltage supply
    • USB
    • Vexternal
  • Error detection
    • Open LED
    • Shorted LED
  • Thermal shutdown
  • Compatible with STM32 Nucleo board
  • Equipped with Arduino™ UNO R3 connector
  • RoHS compliant

Show More

STEVAL-FKI915V1

Sub-1GHz transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

EVALSTDRV600HB8

Demonstration board kit for L638xE and L639x high-voltage gate drivers

主要特性

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

EVAL6498L

Evaluation board for the L6498L gate driver

主要特性

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

EVAL6494L

Demonstration board for L6494L gate driver

主要特性

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

EVALSP820-XS

Compact evaluation board for STSPIN820 stepper motor driver

主要特性

  • Operating voltage: 7 V to 45 V
  • Continuous current up to 1.5 A per phase
  • Maximum current up to 2.5 A per phase
  • Integrated low RDS(ON) power stages (HS + LS = 1 Ω typ.)
  • Microstep resolution easily settable through jumpers: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step
  • Simple step and direction control interface
  • Adjustable current control through a potentiometer to set the ref. voltages
  • Embedded PWM current control with selectable decay mode (fast or slow)
  • Full set of embedded protections
    • Non-dissipative overcurrent
    • Undervoltage lockout
    • Thermal shutdown
    • Short-circuit
  • Compatible with RAMPS and similar open source solutions for FFF 3D printers
  • Very compact footprint: 15 x 20 mm

Show More

图片

Image
Image
STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN2809
      6-row / 30-mA LED driver with boost converter for the backlight of LCD panels
      2.2
      720.11 KB
      PDF
      AN4607
      Basics on the thyristor (SCR) structure and its application
      2.0
      317.41 KB
      PDF
      AN4030
      Gate to cathode capacitor, impact on Triac immunity and reliability
      1.0
      223.75 KB
      PDF
      AN4722
      HTS221数字湿度传感器:系统硬件集成指南
      1.0
      1,003.95 KB
      PDF
      AN4363
      How to select the Triac, ACS, or ACST that fits your application
      2.1
      361.44 KB
      PDF
      AN4608
      How to select the right thyristor (SCR) for your application
      1.0
      895.7 KB
      PDF
      AN2648
      Increasing the resolution of analog temperature sensors
      1.4
      161.7 KB
      PDF
      AN441
      Inductive load control with AC switches
      3.2
      712.21 KB
      PDF
      AN4909
      Intelligent power switches for 48 V battery applications
      1.0
      1.07 MB
      PDF
      AN4564
      Is a positive power supply mandatory for my application, or could a negative output work also?
      1.0
      384.04 KB
      PDF
      AN4290
      L647x, L648x and powerSTEP01 family communication protocol
      2.1
      486.67 KB
      PDF
      AN3981
      LED array drivers
      1.1
      3.61 MB
      PDF
      AN4193
      Low duty cycle operation with the SPIRIT1 transceiver
      2.0
      225.38 KB
      PDF
      AN392
      Microcontrollers and TRIAC-based dimmers
      2.3
      132.78 KB
      PDF
      AN4242
      New generation of 650 V SiC diodes
      2.0
      4.75 MB
      PDF
      AN3168
      Non-insulated SCR / Triac control circuits
      1.2
      315.8 KB
      PDF
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN2703
      Parameter list for SCRs, TRIACs, AC switches, and DIACS
      2.6
      98.99 KB
      PDF
      AN4158
      Peak current control with automatic decay adjustment and predictive current control: basics and setup
      2.1
      983.2 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN440
      QII and QIII TRIAC triggering with positive power supply
      3.4
      97.11 KB
      PDF
      AN437
      RC snubber circuit design for TRIACs
      2.6
      587.73 KB
      PDF
      AN533
      SCRs, TRIACs, and AC switches, thermal management precautions for handling and mounting
      3.6
      217.19 KB
      PDF
      AN4198
      SPIRIT1: increasing the output power
      1.0
      387.86 KB
      PDF
      AN439
      Snubberless™ and logic level TRIAC behavior at turn-off
      3.4
      458.5 KB
      PDF
      AN308
      TRIAC analog control circuits for inductive loads
      4.2
      141.89 KB
      PDF
      AN442
      TRIACS AND MICROCONTROLLERS - THE EASY CONNECTION
      2.1
      55.99 KB
      PDF
      AN3169
      Technology performance comparison of Triacs subjected to fast transient voltages
      1.1
      169.53 KB
      PDF
      AN302
      Thyristors and TRIACs: holding current - an important parameter
      3.5
      138.63 KB
      PDF
      AN303
      Thyristors and TRIACs: latching current
      3.4
      164.96 KB
      PDF
      AN4772
      wM-Bus (2013) firmware stack overview
      1.0
      786.08 KB
      PDF
      AN2809

      6-row / 30-mA LED driver with boost converter for the backlight of LCD panels

      AN4607

      Basics on the thyristor (SCR) structure and its application

      AN4030

      Gate to cathode capacitor, impact on Triac immunity and reliability

      AN4722

      HTS221数字湿度传感器:系统硬件集成指南

      AN4363

      How to select the Triac, ACS, or ACST that fits your application

      AN4608

      How to select the right thyristor (SCR) for your application

      AN2648

      Increasing the resolution of analog temperature sensors

      AN441

      Inductive load control with AC switches

      AN4909

      Intelligent power switches for 48 V battery applications

      AN4564

      Is a positive power supply mandatory for my application, or could a negative output work also?

      AN4290

      L647x, L648x and powerSTEP01 family communication protocol

      AN3981

      LED array drivers

      AN4193

      Low duty cycle operation with the SPIRIT1 transceiver

      AN392

      Microcontrollers and TRIAC-based dimmers

      AN4242

      New generation of 650 V SiC diodes

      AN3168

      Non-insulated SCR / Triac control circuits

      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN2703

      Parameter list for SCRs, TRIACs, AC switches, and DIACS

      AN4158

      Peak current control with automatic decay adjustment and predictive current control: basics and setup

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN440

      QII and QIII TRIAC triggering with positive power supply

      AN437

      RC snubber circuit design for TRIACs

      AN533

      SCRs, TRIACs, and AC switches, thermal management precautions for handling and mounting

      AN4198

      SPIRIT1: increasing the output power

      AN439

      Snubberless™ and logic level TRIAC behavior at turn-off

      AN308

      TRIAC analog control circuits for inductive loads

      AN442

      TRIACS AND MICROCONTROLLERS - THE EASY CONNECTION

      AN3169

      Technology performance comparison of Triacs subjected to fast transient voltages

      AN302

      Thyristors and TRIACs: holding current - an important parameter

      AN303

      Thyristors and TRIACs: latching current

      AN4772

      wM-Bus (2013) firmware stack overview

    • 描述 版本 文档大小 操作
      TN1219
      HTS221 digital humidity sensor: reference design implementation
      2.0
      367.08 KB
      PDF
      TN1218
      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor
      4.0
      3.67 MB
      PDF
      TN1198
      HLGA封装中MEMS传感器的表面贴装指南
      1.0
      240.09 KB
      PDF
      TN1219

      HTS221 digital humidity sensor: reference design implementation

      TN1218

      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor

      TN1198

      HLGA封装中MEMS传感器的表面贴装指南

    • 描述 版本 文档大小 操作
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.1
      1.78 MB
      PDF
      PM0257
      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南
      1.0
      1.33 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南

演示和培训资料

    • 描述 版本 文档大小 操作
      An introduction to electric motors 1.0
      2.23 MB
      PDF
      STEVAL-3DP001V1 - Reference design for FDM 3D printing 1.0
      1.57 MB
      PDF
      STSPIN logic core basics 1.0
      1.22 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      An introduction to electric motors

      STEVAL-3DP001V1 - Reference design for FDM 3D printing

      STSPIN logic core basics

      X-NUCLEO-IDB05A1 Quick start guide

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series 1.0
      516.44 KB
      PDF
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      714.73 KB
      PDF
      BlueNRG-2 新一代蓝牙低功耗片上系统 3.0
      222.22 KB
      PDF
      DC-DC converters
      557.92 KB
      PDF
      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V) 1.0
      975.08 KB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      LED770x LED drivers 1.0
      562.13 KB
      PDF
      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器 3.0
      824.66 KB
      PDF
      ST Diodes Finder : the new app for Android and iOS 2.0
      1.46 MB
      PDF
      ST Thyristor Finder: SCRs and Triacs on Android and iOS 1.0
      854.07 KB
      PDF
      Smooth & silent stepper motor driver 04.2018
      1.24 MB
      PDF

      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 新一代蓝牙低功耗片上系统

      DC-DC converters

      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V)

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      LED770x LED drivers

      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器

      ST Diodes Finder : the new app for Android and iOS

      ST Thyristor Finder: SCRs and Triacs on Android and iOS

      Smooth & silent stepper motor driver

    • 描述 版本 文档大小 操作
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      STSPIN 电机驱动器 09.2016
      1.47 MB
      PDF
      Thyristors, Triacs, AC switches and A.S.D™ selection guide 2.0
      1.51 MB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

      STSPIN 电机驱动器

      Thyristors, Triacs, AC switches and A.S.D™ selection guide

    • 描述 版本 文档大小 操作
      Motor Control Reference Guide 15.10
      7.15 MB
      PDF

      Motor Control Reference Guide

    • 描述 版本 文档大小 操作
      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control 1.0
      5.54 MB
      PDF
      Spinning the world of 3D Printers 1.0
      529.04 KB
      PDF

      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control

      Spinning the world of 3D Printers

软件

    • 产品型号

      Bluetooth Low Energy software expansion for STM32Cube

      Stepper motor driver software expansion for STM32Cube

      Sub-1 GHz RF communication software expansion for STM32Cube

    • 产品型号

      Standard C platform-independent drivers for MEMS motion and environmental sensors

    • 产品型号

      STSW-BNRG-S2LP evaluation software package based on BlueNRG-1 and S2-LP

      BlueNRG current consumption estimation tool

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

EMI Filtering and Signal Conditioning

产品型号 描述
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
产品型号
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter

Imaging and Photonics Solutions

产品型号 描述
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
产品型号
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

Interfaces and Transceivers

产品型号 描述
STUSB1602 USB Type-C controller (with Tx/Rx line driver and BMC)
STUSB4500 Stand-alone USB PD controller (with sink Auto-run mode)
产品型号
USB Type-C controller (with Tx/Rx line driver and BMC)
Stand-alone USB PD controller (with sink Auto-run mode)

MEMS and Sensors

产品型号 描述
HTS221 Capacitive digital sensor for relative humidity and temperature
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751 2.25 V low-voltage local digital temperature sensor
产品型号
Capacitive digital sensor for relative humidity and temperature
Analog temperature sensor, ultra-low current 2.4 V, high precision
2.25 V low-voltage local digital temperature sensor

Motor Drivers

产品型号 描述
L6474 Stepper motor driver with up to 16 microsteps with SPI and advanced current control
STSPIN220 Low voltage stepper motor driver
STSPIN820 Advanced 256 microsteps integrated motor driver with step-clock and direction interface
产品型号
Stepper motor driver with up to 16 microsteps with SPI and advanced current control
Low voltage stepper motor driver
Advanced 256 microsteps integrated motor driver with step-clock and direction interface

电源管理

产品型号 描述
L6398 High voltage high and low-side driver
L6494 High voltage high and low-side 2 A gate driver
L6498 High voltage high and low-side 2 A gate driver
L6985F 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
L7985 2A step-down switching regulator
L7986 3A step-down switching regulator
L7987 61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
L7987L 61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
ST1S14 Up to 3 A step down switching regulator
产品型号
High voltage high and low-side driver
High voltage high and low-side 2 A gate driver
High voltage high and low-side 2 A gate driver
38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
2A step-down switching regulator
3A step-down switching regulator
61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
Up to 3 A step down switching regulator

Power Transistors

产品型号 描述
STL100N8F7 N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
产品型号
N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package

无线收发器、MCU、模块

产品型号 描述
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
S2-LP Ultra-low power, high performance, sub-1GHz transceiver
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
SPIRIT1 Low data rate, low power Sub 1GHz transceiver
SPSGRF Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
STS1TX Low data rate, low power sub-1GHz transmitter
产品型号
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Ultra-low power, high performance, sub-1GHz transceiver
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1
Low data rate, low power Sub 1GHz transceiver
Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
Low data rate, low power sub-1GHz transmitter