电动工具有各种各样的形状，包括电钻、电动螺丝刀、以及更复杂的智能扳手或园林工具，它们或由交流电源供电，或由无绳设备中的电池供电。
电动工具可以使用有刷直流、三相无刷直流或感应电机，这取决于面向DIY爱好者还是经常使用的专业人士，以及设备的类型和要求的性能。
这些工具内部的电子器件需要提供高效率 — 尤其是在无线设计中 — 和较长的使用寿命，同时还需要支持新的功能（包括运动感知和连接），以增强工具的易用性。
我们拥有广泛的电机控制解决方案，以匹配各种电动工具中应用的电机类型和额定功率，包括功率MOSFET和智能功率模块（IPM）、MOSFET、IGBT预驱动、单片式电机驱动、众多32位STM32微控制器、以及运动和距离传感器。
精选 视频
-
-
型号 Description 状态 Core Products Price (US$)* Order / DownloadBuy AllNUCLEO-L152RE Key features
- Common features
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
STM32 Nucleo-64 development board with STM32L152RE MCU, supports Arduino and ST morpho connectivity Active12.74 Buy now X-NUCLEO-IDS01A5 Key features
- STM32 Nucleo expansion board based on the SPSGRF-915
- X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
- SPGRF-915:
- 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
- Integrated Balun (BALF-SPI-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connectors
- Scalable solution; can cascade multiple boards for larger systems
- Example firmware for point-to-point communication, compatible with STM32Cube firmware
- RoHS compliant
Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo ActiveSPSGRF-915 14.70 Buy now X-NUCLEO-IKS01A2 Key features
- LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
- LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
- LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
- HTS221: capacitive digital relative humidity and temperature
- DIL24 socket for additional MEMS adapters and other sensors
- Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
- I²C sensor hub features on LSM6DSL available
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connector
- RoHS compliant
Motion MEMS and environmental sensor expansion board for STM32 Nucleo ActiveLSM6DSL; LSM303AGR; LPS22HB; HTS221 18.38 Buy now X-NUCLEO-6180XA1 Key features
- VL6180X proximity, gesture and ambient light sensing (ALS) module.
- Slider switch controlling 2 functions:
- Ranging measurement, beyond 400mm.
- Ambient light sensing, up to 100 kLux1.
- 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
- Excellent ranging accuracy, independent of the reflectance of the target.
- In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
- Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
- Basic gesture recognition application can be developed with one or multiple VL6180X modules.
- Compatible with STM32 Nucleo board family.
- Equipped with ArduinoTM UNO R3 connector.
- RoHS compliant.
- Full system SW supplied, download from www.st.com/vl6180x.
FEATURED RESOURCES
gerberProximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo ActiveVL6180X 20.83 Buy now FP-SNS-6LPNODE1 Key features
- Complete firmware to connect an IoT node with sensors and actuators to a 6LoWPAN network, using sub-1GHz RF communication technology
- Middleware library with Contiki OS and Contiki 6LoWPAN protocol stack 3.0
- Support for mesh networking technology through the standard RPL protocol
- IPSO Smart Object data representation of the node resources (sensors and actuators) with the OMA Lightweight M2M (LWM2M) standard
- Sample implementation available for X-NUCLEO-S2868A1, X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 boards, X-NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2, and X-NUCLEO-6180X1 sensor boards, when connected to a NUCLEO-F401RE or a NUCLEO-L152RE board
- Easy portability across different MCU families, thanks to STM32Cube
- Free, user-friendly license terms
STM32Cube function pack for IoT sensor node connection to 6LoWPAN networks through sub-1GHz RF communication Active- 型号 Supplier 下载 FP-SNS-6LPNODE1 ST FP-SNS-6LPNODE1描述 :
STM32Cube function pack for IoT sensor node connection to 6LoWPAN networks through sub-1GHz RF communicationPrice (US$)*
-型号 Supplier 下载 FP-SNS-6LPNODE1 ST - Common features
-
-
-
型号 Description 状态 Core Products Price (US$)* Order / DownloadBuy AllNUCLEO-L476RG Key features
- Common features
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
STM32 Nucleo-64 development board with STM32L476RG MCU, supports Arduino and ST morpho connectivity Active13.72 Buy now X-NUCLEO-IDB05A1 Key features
- STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
- X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
- SPBTLE-RF:
- Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
- Integrated Balun (BALF-NRG-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connector
- Scalable solution, capable of cascading multiple boards for larger systems
- Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
- RoHS compliant
Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo ActiveSPBTLE-RF; BlueNRG-MS; BALF-NRG-01D3 12.87 Buy now X-NUCLEO-IKS01A2 Key features
- LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
- LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
- LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
- HTS221: capacitive digital relative humidity and temperature
- DIL24 socket for additional MEMS adapters and other sensors
- Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
- I²C sensor hub features on LSM6DSL available
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connector
- RoHS compliant
Motion MEMS and environmental sensor expansion board for STM32 Nucleo ActiveLSM6DSL; LSM303AGR; LPS22HB; HTS221 18.38 Buy now FP-SNS-MOTENV1 Key features
- Complete firmware to develop an IoT node with BLE connectivity, environmental and motion sensors
- Middleware libraries for sensor data fusion and accelerometer-based real-time activity recognition
- Compatible with BlueMS applications for Android/iOS, to perform sensor data reading, motion algorithm features demo and firmware update (FOTA)
- Example implementation available for the X-NUCLEO-IKS01A2 (or X-NUCLEO-IKS01A1), P-NUCLEO-IKA02A1 and X-NUCLEO-IDB05A1 (or X- NUCLEO-IDB04A1) connected to a NUCLEO-F401RE or NUCLEO-L476RG or NUCLEO-L053R8 board
- Easy portability across different MCU families, thanks to STM32Cube
- Free, user-friendly license terms
STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensors Active- 型号 Supplier 下载 FP-SNS-MOTENV1 ST FP-SNS-MOTENV1描述 :
STM32Cube function pack for IoT node with BLE connectivity and environmental and motion sensorsPrice (US$)*
-型号 Supplier 下载 FP-SNS-MOTENV1 ST - Common features
-
-
-
型号 Description 状态 Core Products Price (US$)* Order / DownloadBuy AllNUCLEO-F401RE Key features
- Common features
- STM32 microcontroller in LQFP64 package
- 1 user LED shared with Arduino™
- 1 user and 1 reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
- Flexible power-supply options: ST-LINK, USB VBUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
- Board-specific features
- External SMPS to generate Vcore logic supply
- 24 MHz HSE
- Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
- Arm® Mbed Enabled™ compliant
STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity Active12.74 Buy now X-NUCLEO-IDS01A4 Key features
- STM32 Nucleo expansion board based on the SPSGRF-868
- SPGRF-868 characteristics:
- 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
- Integrated Balun (BALF-SPI-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connectors
- Scalable solution; capable of cascading multiple boards for larger systems
- Example firmware for point-to-point communication, compatible with STM32Cube firmware
- RoHS compliant
Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo ActiveSPSGRF-868 14.70 Buy now X-NUCLEO-IDW01M1 Key features
- X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
- SPWF01SA module major characteristics:
- low power IEEE 802.11 b/g/n transceiver
- integrated SMD antenna
- STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
- 1 MByte extended flash for FW update over the air (FOTA)
- integrated protocol stacks: TCP/IP, TLS/SSL
- application layer functions: web server supporting dynamic web pages, REST API to get & post web content
- WEP/WPA/WPA2 personal security
- system modes: station, IBSS, and miniAP
- 16 configurable GPIOs available
- simple AT command set host interface through UART
- compatible with STM32 Nucleo boards
- equipped both with ST morpho connector and Arduino UNO R3 connectors
- scalable solution; it can cascade multiple boards for larger systems
- free development firmware library and examples, compatible with STM32Cube
- RoHS compliant
Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo NRNDSPWF01SA 22.05 Buy now X-NUCLEO-6180XA1 Key features
- VL6180X proximity, gesture and ambient light sensing (ALS) module.
- Slider switch controlling 2 functions:
- Ranging measurement, beyond 400mm.
- Ambient light sensing, up to 100 kLux1.
- 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
- Excellent ranging accuracy, independent of the reflectance of the target.
- In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
- Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
- Basic gesture recognition application can be developed with one or multiple VL6180X modules.
- Compatible with STM32 Nucleo board family.
- Equipped with ArduinoTM UNO R3 connector.
- RoHS compliant.
- Full system SW supplied, download from www.st.com/vl6180x.
FEATURED RESOURCES
gerberProximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo ActiveVL6180X 20.83 Buy now FP-SNS-6LPNODE1 Key features
- Complete firmware to connect an IoT node with sensors and actuators to a 6LoWPAN network, using sub-1GHz RF communication technology
- Middleware library with Contiki OS and Contiki 6LoWPAN protocol stack 3.0
- Support for mesh networking technology through the standard RPL protocol
- IPSO Smart Object data representation of the node resources (sensors and actuators) with the OMA Lightweight M2M (LWM2M) standard
- Sample implementation available for X-NUCLEO-S2868A1, X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 boards, X-NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2, and X-NUCLEO-6180X1 sensor boards, when connected to a NUCLEO-F401RE or a NUCLEO-L152RE board
- Easy portability across different MCU families, thanks to STM32Cube
- Free, user-friendly license terms
STM32Cube function pack for IoT sensor node connection to 6LoWPAN networks through sub-1GHz RF communication Active- 型号 Supplier 下载 FP-SNS-6LPNODE1 ST FP-SNS-6LPNODE1描述 :
STM32Cube function pack for IoT sensor node connection to 6LoWPAN networks through sub-1GHz RF communicationPrice (US$)*
-型号 Supplier 下载 FP-SNS-6LPNODE1 ST - Common features
-
| 型号 | Description | |
|---|---|---|
| STEVAL-IHM032V1 | 150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control |
Quick view
主要特性
|
| STEVAL-SPIN3204 | Six-step brushless motor driver evaluation board for applications based on the STSPIN32F0B BLDC controller |
Quick view
主要特性
|
| STEVAL-IHM036V1 | Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B |
Quick view
主要特性
|
| STEVAL-ISA099V1 | 3 A step-down switching demonstration board based on the L7986 in DFN10 package |
Quick view
主要特性
|
| STEVAL-IHM040V1 | BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™ |
Quick view
主要特性
|
| STEVAL-IHM035V2 | 3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano) |
Quick view
主要特性
|
| STEVAL-IHM045V1 | 3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano) |
Quick view
主要特性
|
| STEVAL-ISA152V1 | 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 |
Quick view
主要特性
|
| STEVAL-MKI153V1 | H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2 |
Quick view
主要特性
|
| STEVAL-IHM028V2 | 2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module |
Quick view
主要特性
|
| STEVAL-IHM023V3 | 1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT |
Quick view
主要特性
|
| STEVAL-ISA158V1 | 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 |
Quick view
主要特性
|
| X-NUCLEO-IHM08M1 | Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo |
Quick view
主要特性
|
| X-NUCLEO-IDS01A4 | Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo |
Quick view
主要特性
|
| EVAL6491HB | Demonstration board for L6491 gate driver with smart shut down feature |
Quick view
主要特性
|
| X-NUCLEO-IDB05A1 | Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo |
Quick view
主要特性
|
| STEVAL-IPM05F | 500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM |
Quick view
主要特性
|
| STEVAL-IPM07F | 700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM |
Quick view
主要特性
|
| STEVAL-MKI169V1 | I3G4250D adapter board for a standard DIL 24 socket |
Quick view
主要特性
|
| STEVAL-IPM08B | 800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM |
Quick view
主要特性
|
| STEVAL-SPIN3201 | STSPIN32F0 Advanced BLDC controller with embedded STM32 MCU evaluation board |
Quick view
主要特性
|
| STEVAL-FKI915V1 | Sub-1GHz transceiver development kit based on S2-LP |
Quick view
主要特性
|
| STEVAL-SPIN3202 | STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board |
Quick view
主要特性
|
| STEVAL-IDB007V1M | Evaluation platform based on the SPBTLE-1S module |
Quick view
主要特性
|
| STEVAL-MKI182V1 | ISM330DLC adapter board for a standard DIL24 socket |
Quick view
主要特性
|
| STEVAL-IPMNM1N | 60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET |
Quick view
主要特性
|
| STEVAL-IPMNM2N | 100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET |
Quick view
主要特性
|
| STEVAL-IDB008V2 | Evaluation platform based on the BlueNRG-2 |
Quick view
主要特性
|
| EVAL6498L | Evaluation board for the L6498L gate driver |
Quick view
主要特性
|
| STEVAL-FKI868V2 | Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP |
Quick view
主要特性
|
| STEVAL-FKI433V2 | Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP |
Quick view
主要特性
|
| STEVAL-CTM009V1 | 5 kW low voltage high current inverter for industrial motor control applications |
Quick view
主要特性
|
| STEVAL-ISA095V1 | Up to 3 A step-down switching regulator based on the ST1S14 |
Quick view
主要特性
|
型号
STEVAL-IHM032V1
150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control
STEVAL-SPIN3204
Six-step brushless motor driver evaluation board for applications based on the STSPIN32F0B BLDC controller
STEVAL-IHM036V1
Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B
STEVAL-ISA099V1
3 A step-down switching demonstration board based on the L7986 in DFN10 package
STEVAL-IHM040V1
BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™
STEVAL-IHM035V2
3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)
STEVAL-IHM045V1
3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)
STEVAL-ISA152V1
3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987
STEVAL-MKI153V1
H3LIS331DL 3-axis digital accelerometer adapter board for standard DIL 24 socket, compatible with STEVAL-MKI109V2
STEVAL-IHM028V2
2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module