概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

纺织机械(包括缝纫机、绕线机或针织机)是一种复杂的机电设备,这些设备以极高的精度进行大量动作,包括移动轴、滚筒横向运动、放线和切割、三轴推进、移动臂和工作台。

纺织机械包含三个构建单元:电源管理、主控单元和运动控制。根据电机的不同类型(包括三相无刷直流电动机和步进电机)以及需要完成的具体任务所要求的性能,提供各种各样的运动控制子系统,而更简单的操作(如切割)则由电磁阀完成。

我们拥有广泛的功率MOSFET、智能功率模块(IPM)、预驱动、单片式电机驱动和高性能STM32微控制器组合(支持设计高效电机控制解决方案),众多交流-直流(AC-DC)和直流-直流(DC-DC)电源管理和供电解决方案,一系列运动、接近和距离传感器以及连接解决方案,帮助设计高性能纺织装备。

产品型号
描述
EVLPOWERSTEP01 System-in-package integrating microstepping controller and 10 A power MOSFETs evaluation board Quick view

主要特性

  • Voltage range from 10.5 V to 85 V
  • 10 Ar.m.s. maximum output current
  • Up to 1/128 microstep
  • Programmable speed profile and advanced commands
  • Adjustable output slew rate
  • SPI with daisy chain feature
  • FLAG and BUSY LED indicators
  • Flexible supply voltage management
  • Suitable to be used in combination with STEVAL-PCC009V2

Show More

STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4 Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo Quick view

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IFP005V2 High side driver demonstration board based on the VN751PT Quick view

主要特性

  • RoHS compliant
  • Transil addition between TRIAC A2-G terminals
  • Overvoltage protection is not implemented on the board but some solder pads are available to implement it in two different ways:
  • Free development area with hole matrix available for application breadboard adaptation
  • 3 independent application programsHand dryer with infrared sensor and T1235H-6T switchBathroom fan with humidity sensor and ACS108 switchMulti-entrance room controller with push button and BTB08-600SW switch
  • Capacitive power supply (680 nF capacitor EPCOS B32923C36845 V ±10%Average output current: 16 mAStandby power losses < 0.3 W @ 230 V
  • Two potentiometers for setting sensor sensitivity and TRIAC turn-off delay
  • ICC connector for software adjustment
  • Varistor addition between mains voltage
  • Program selector (U2)

Show More

STEVAL-IFP010V3 High-side driver based on the VNI2140J Quick view

主要特性

  • Output current: 1 A per channel
  • Shorted-load protection
  • Junction overtemperature protection
  • Case overtemperature protection for thermal independence of the channels
  • Non-simultaneous TCSD (thermal case shutdown) restart for the various channels
  • Protection against loss of ground
  • Current limitation
  • Undervoltage shutdown
  • Open load in off-state and short to VCC detection
  • Open-drain diagnostic outputs
  • 3.3 V CMOS/TTL compatible inputs
  • Fast demagnetization of inductive loads
  • Conforms to IEC 61131-2 supply voltage: +4 V to +36 V
  • RoHS compliant

Show More

STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14 Quick view

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

STEVAL-IFP020V1 High side driver based on L6370Q Quick view

主要特性

  • Single-channel topology
  • Galvanic isolation
  • 2.5 A output current
  • 9.5 V to 35 V supply voltage range
  • Short-circuit, overload, and thermal protections
  • Loss of ground and VS protections
  • Fast demagnetization of inductive loads
  • Open load, output short to VS detection
  • Two diagnostic outputs
  • Output status LED driver
  • EMC immunity against burst, surge, and ESD
  • RoHS compliant

Show More

STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package Quick view

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

EVAL6482H High power microstepping motor driver with the L6482H Quick view

主要特性

  • Voltage range from 10.5 V to 85 V
  • Low Rds(ON) MOSFETs in DPAK package
  • SPI with daisy chain feature
  • FLAG and BUSY LED indicators
  • Flexible supply voltage management
  • Suitable for use in combination with the STEVAL-PCC009V2

Show More

图片

Image
Image
STEVAL-IFP022V1 Eight-channel high-side driver based on the VNI8200XP Quick view

主要特性

  • Operating voltage: from 10.5 to 33 V
  • Operating current: 0.7 A for each channel
  • Reverse polarity protection
  • High-speed opto-isolation for SPI and parallel communication
  • Low-speed opto-isolation for device fault signaling
  • Step-down converter for 3.3 V or 5 V
  • Digital supply voltage
  • LED matrix for channel status signaling
  • Microcontroller interface
  • Designed to meet EMC standard requirements: IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5
  • RoHS compliant

Show More

STEVAL-MKI137V1 LIS3MDL adapter board for standard DIL24 socket Quick view

主要特性

  • Complete LIS3MDL pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

Show More

STEVAL-IFP015V2 ISO8200B High Side Driver - 8 Channels evaluation board Quick view

主要特性

  • VCC operating voltage from 10.5 to 33 V
  • 0.7 A for each channel
  • Reverse polarity protection on VCC and VDD supply voltage
  • Digital supply voltage VDD 3.3/5 V
  • Microcontroller interface direct/synchronous mode communication
  • Designed to meet requirements of IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 standards
  • RoHS compliant

Show More

STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 Quick view

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-IHM028V2 2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module Quick view

主要特性

  • Complete solution for a 2 kW power inverter
  • HV supply mode: voltage 90 VAC to 285 VAC or direct DC line 125 V DC to 400 V DC
  • Input voltage range extended to +400 V, for PFC compliance
  • Input inrush limiter with bypassing relay
  • Brake feature with overvoltage comparator
  • Single- or three-shunt resistor current sensing method
  • Hall sensor or encoder input
  • Tachometer input
  • Overtemperature and overcurrent hardware protection
  • Active fan with automatic overtemperature switching
  • Compact and safe design
  • Universal conception for further evaluation with bread board and testing pins
  • RoHS compliant

Show More

STEVAL-IHM023V3 1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT Quick view

主要特性

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5 Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo Quick view

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IPM05F 500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM10F 1000 W motor control power board based on STGIF10CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1000 W
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM10B 1200 W motor control power board based on STGIB10CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1200 W
  • Nominal current: up to 7 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM15B 1500 W motor control power board based on STGIB15CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1500 W
  • Nominal current: up to 9 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB15CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size

Show More

STEVAL-IPM07F 700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

Show More

X-NUCLEO-OUT01A1 Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo Quick view

主要特性

  • Enables industrial programmable logic controller (PLC) capabilities on STM32 Nucleo
  • ISO8200BQ galvanic isolated octal high-side smart power solid state-relay
  • Operating voltage from 10.5 V to 33 V
  • Maximum operating output current per channel IOUT = 700 mA
  • Status LEDs: Fault, Thermal protection
  • Compatible with Arduino® UNO R3 connector
  • Compliance with EMC standards:
    • IEC61000-4-2: 8kV Contact Discharge and 15kV Air discharge
    • IEC61000-4-3: 4kV Discharge on output and supply line
    • IEC61000-4-5: 2kV Discharge on output and supply line
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

STEVAL-IFP028V1 Single high side driver based on IPS160H Quick view

主要特性

  • Operating voltage from 8 to 60 V
  • Operating current up to 2.5 A
  • Programmable cut-off delay time
  • Reverse polarity protection
  • Galvanic isolation on PCB
  • Input pins compatible with VCC rails
  • Green LED for channel ON/OFF status
  • Red LED for common diagnostics on:
    • Open load in OFF state
    • Cut-off
    • Thermal protection
    • Red LED functionality on DIAG pin guaranteed from VCC = 12 V
  • Microcontroller interface
  • IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5 compliant
  • RoHS compliant

Show More

STEVAL-MKI168V1 IIS2DH adapter board for a standard DIL 24 socket Quick view

主要特性

  • Complete IIS2DH pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

STEVAL-IFP034V1 Single high side driver based on IPS161H Quick view

主要特性

  • Operating voltage range: 8 to 60 V
  • Operating current: 0.5 A max
  • Programmable cut-off delay time
  • Reverse polarity protection
  • Galvanic isolation on PCB
  • Input pins compatible with VCC rails
  • Green LED for channel ON/OFF status
  • Red LED for Common Diagnostics on:
    • open load in OFF state
    • cut-off
    • thermal protection
  • Microcontroller interface
  • Compliant with IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5
  • RoHS compliant

Show More

STEVAL-IPM08B 800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM Quick view

主要特性

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-FKI915V1 Sub-1GHz transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-MKI139V5 Microphone coupon board based on the MP23AB01DH fully differential analog MEMS microphone Quick view

主要特性

  • 4 x MP23AB01DH bottom port analog MEMS microphones
  • Vsupply from 2.3 to 3.6 V
  • 135 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • Frequency range 100 Hz - 10 kHz
  • 65 dB of SNR
  • Sensitivity -38 dBFV ± 1 dBV
  • THD < 0.2% @ 94 dBSPL, 1 kHz
  • THD < 5% @ 130 dBSPL, 1 kHz
  • RoHS compliant

Show More

EVALSTDRV600HB8 Demonstration board kit for L638xE and L639x high-voltage gate drivers Quick view

主要特性

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

STEVAL-SPIN3202 STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board Quick view

主要特性

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

Show More

STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-MKI182V1 ISM330DLC adapter board for a standard DIL24 socket Quick view

主要特性

  • Complete ISM330DLC pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

Show More

STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

STEVAL-MKI185V1 IIS2MDC adapter board for a standard DIL24 socket Quick view

主要特性

  • Complete IIS2MDC pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109V3 motherboard
  • RoHS compliant

Show More

STEVAL-MIC001V1 Microphone coupon board based on the MP34DT05-A digital MEMS Quick view

主要特性

  • 4 x MP34DT05-A top port digital MEMS microphones
  • Daughterboard to be used with X-NUCLEO-CCA02M1
  • Vsupply from 1.6 to 3.6 V
  • 122.5 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • PDM single-bit output
  • 64 dB of SNR
  • Sensitivity -26 dBFS ±3 dB
  • RoHS compliant

Show More

STEVAL-FKI868V2 Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI433V2 Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP Quick view

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

X-NUCLEO-OUT02A1 Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo Quick view

主要特性

  • Based on the ISO8200AQ whose main characteristics are:
    • Embedded 4kV galvanic isolation
    • Radio frequency communication between the logic and process sides for maximum noise immunity
    • Very low power dissipation (RON(MAX) = 220 mΩ)
    • Fast decay for inductive loads
    • 20 MHz SPI I/F on logic side
    • VCC power good diagnostics
    • Overload and overheating protections with thermal shutdown and diagnostics
    • QFN-32L (9x11x1 mm) package
  • 10.5 to 33 V operating voltage range
  • Green LED (x8) for output on/off status
  • Red LED for process supply power good fault
  • Red LED for overload and overheating
  • Supply reverse polarity protection
  • EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connectors
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant

Show More

产品型号
EVLPOWERSTEP01

System-in-package integrating microstepping controller and 10 A power MOSFETs evaluation board

主要特性

  • Voltage range from 10.5 V to 85 V
  • 10 Ar.m.s. maximum output current
  • Up to 1/128 microstep
  • Programmable speed profile and advanced commands
  • Adjustable output slew rate
  • SPI with daisy chain feature
  • FLAG and BUSY LED indicators
  • Flexible supply voltage management
  • Suitable to be used in combination with STEVAL-PCC009V2

Show More

STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

主要特性

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

X-NUCLEO-IDS01A4

Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-868
  • SPGRF-868 characteristics:
    • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; capable of cascading multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IFP005V2

High side driver demonstration board based on the VN751PT

主要特性

  • RoHS compliant
  • Transil addition between TRIAC A2-G terminals
  • Overvoltage protection is not implemented on the board but some solder pads are available to implement it in two different ways:
  • Free development area with hole matrix available for application breadboard adaptation
  • 3 independent application programsHand dryer with infrared sensor and T1235H-6T switchBathroom fan with humidity sensor and ACS108 switchMulti-entrance room controller with push button and BTB08-600SW switch
  • Capacitive power supply (680 nF capacitor EPCOS B32923C36845 V ±10%Average output current: 16 mAStandby power losses < 0.3 W @ 230 V
  • Two potentiometers for setting sensor sensitivity and TRIAC turn-off delay
  • ICC connector for software adjustment
  • Varistor addition between mains voltage
  • Program selector (U2)

Show More

STEVAL-IFP010V3

High-side driver based on the VNI2140J

主要特性

  • Output current: 1 A per channel
  • Shorted-load protection
  • Junction overtemperature protection
  • Case overtemperature protection for thermal independence of the channels
  • Non-simultaneous TCSD (thermal case shutdown) restart for the various channels
  • Protection against loss of ground
  • Current limitation
  • Undervoltage shutdown
  • Open load in off-state and short to VCC detection
  • Open-drain diagnostic outputs
  • 3.3 V CMOS/TTL compatible inputs
  • Fast demagnetization of inductive loads
  • Conforms to IEC 61131-2 supply voltage: +4 V to +36 V
  • RoHS compliant

Show More

STEVAL-ISA095V1

Up to 3 A step-down switching regulator based on the ST1S14

主要特性

  • 3 A DC output current
  • Operating input voltage from 5.5 V to 48 V
  • 850 kHz internally fixed switching frequency
  • Internal soft-start
  • Internal current limiting
  • Inhibit for zero current consumption
  • 2 mA maximum quiescent current over-temperature range
  • Thermal shutdown
  • RoHS compliant

Show More

STEVAL-IFP020V1

High side driver based on L6370Q

主要特性

  • Single-channel topology
  • Galvanic isolation
  • 2.5 A output current
  • 9.5 V to 35 V supply voltage range
  • Short-circuit, overload, and thermal protections
  • Loss of ground and VS protections
  • Fast demagnetization of inductive loads
  • Open load, output short to VS detection
  • Two diagnostic outputs
  • Output status LED driver
  • EMC immunity against burst, surge, and ESD
  • RoHS compliant

Show More

STEVAL-ISA099V1

3 A step-down switching demonstration board based on the L7986 in DFN10 package

主要特性

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

EVAL6482H

High power microstepping motor driver with the L6482H

主要特性

  • Voltage range from 10.5 V to 85 V
  • Low Rds(ON) MOSFETs in DPAK package
  • SPI with daisy chain feature
  • FLAG and BUSY LED indicators
  • Flexible supply voltage management
  • Suitable for use in combination with the STEVAL-PCC009V2

Show More

图片

Image
Image
STEVAL-IFP022V1

Eight-channel high-side driver based on the VNI8200XP

主要特性

  • Operating voltage: from 10.5 to 33 V
  • Operating current: 0.7 A for each channel
  • Reverse polarity protection
  • High-speed opto-isolation for SPI and parallel communication
  • Low-speed opto-isolation for device fault signaling
  • Step-down converter for 3.3 V or 5 V
  • Digital supply voltage
  • LED matrix for channel status signaling
  • Microcontroller interface
  • Designed to meet EMC standard requirements: IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5
  • RoHS compliant

Show More

STEVAL-MKI137V1

LIS3MDL adapter board for standard DIL24 socket

主要特性

  • Complete LIS3MDL pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

Show More

STEVAL-IFP015V2

ISO8200B High Side Driver - 8 Channels evaluation board

主要特性

  • VCC operating voltage from 10.5 to 33 V
  • 0.7 A for each channel
  • Reverse polarity protection on VCC and VDD supply voltage
  • Digital supply voltage VDD 3.3/5 V
  • Microcontroller interface direct/synchronous mode communication
  • Designed to meet requirements of IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 standards
  • RoHS compliant

Show More

STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

主要特性

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-IHM028V2

2 kW 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module

主要特性

  • Complete solution for a 2 kW power inverter
  • HV supply mode: voltage 90 VAC to 285 VAC or direct DC line 125 V DC to 400 V DC
  • Input voltage range extended to +400 V, for PFC compliance
  • Input inrush limiter with bypassing relay
  • Brake feature with overvoltage comparator
  • Single- or three-shunt resistor current sensing method
  • Hall sensor or encoder input
  • Tachometer input
  • Overtemperature and overcurrent hardware protection
  • Active fan with automatic overtemperature switching
  • Compact and safe design
  • Universal conception for further evaluation with bread board and testing pins
  • RoHS compliant

Show More

STEVAL-IHM023V3

1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT

主要特性

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

Show More

X-NUCLEO-IDS01A5

Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo

主要特性

  • STM32 Nucleo expansion board based on the SPSGRF-915
  • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
  • SPGRF-915:
    • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
    • Integrated Balun (BALF-SPI-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connectors
  • Scalable solution; can cascade multiple boards for larger systems
  • Example firmware for point-to-point communication, compatible with STM32Cube firmware
  • RoHS compliant

Show More

X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主要特性

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

STEVAL-IPM05F

500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM10F

1000 W motor control power board based on STGIF10CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1000 W
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM10B

1200 W motor control power board based on STGIB10CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1200 W
  • Nominal current: up to 7 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-IPM15B

1500 W motor control power board based on STGIB15CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1500 W
  • Nominal current: up to 9 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB15CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size

Show More

STEVAL-IPM07F

700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

Show More

X-NUCLEO-OUT01A1

Industrial Digital output expansion board based on ISO8200BQ for STM32 Nucleo

主要特性

  • Enables industrial programmable logic controller (PLC) capabilities on STM32 Nucleo
  • ISO8200BQ galvanic isolated octal high-side smart power solid state-relay
  • Operating voltage from 10.5 V to 33 V
  • Maximum operating output current per channel IOUT = 700 mA
  • Status LEDs: Fault, Thermal protection
  • Compatible with Arduino® UNO R3 connector
  • Compliance with EMC standards:
    • IEC61000-4-2: 8kV Contact Discharge and 15kV Air discharge
    • IEC61000-4-3: 4kV Discharge on output and supply line
    • IEC61000-4-5: 2kV Discharge on output and supply line
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

STEVAL-IFP028V1

Single high side driver based on IPS160H

主要特性

  • Operating voltage from 8 to 60 V
  • Operating current up to 2.5 A
  • Programmable cut-off delay time
  • Reverse polarity protection
  • Galvanic isolation on PCB
  • Input pins compatible with VCC rails
  • Green LED for channel ON/OFF status
  • Red LED for common diagnostics on:
    • Open load in OFF state
    • Cut-off
    • Thermal protection
    • Red LED functionality on DIAG pin guaranteed from VCC = 12 V
  • Microcontroller interface
  • IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5 compliant
  • RoHS compliant

Show More

STEVAL-MKI168V1

IIS2DH adapter board for a standard DIL 24 socket

主要特性

  • Complete IIS2DH pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

STEVAL-IFP034V1

Single high side driver based on IPS161H

主要特性

  • Operating voltage range: 8 to 60 V
  • Operating current: 0.5 A max
  • Programmable cut-off delay time
  • Reverse polarity protection
  • Galvanic isolation on PCB
  • Input pins compatible with VCC rails
  • Green LED for channel ON/OFF status
  • Red LED for Common Diagnostics on:
    • open load in OFF state
    • cut-off
    • thermal protection
  • Microcontroller interface
  • Compliant with IEC 61000-4-2, IEC61000-4-4 and IEC 61000-4-5
  • RoHS compliant

Show More

STEVAL-IPM08B

800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM

主要特性

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

Show More

STEVAL-FKI915V1

Sub-1GHz transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
  • STM32 Nucleo-64 development board with STM32L152RE MCU
  • Suitable for wireless M-Bus systems
  • Suitable for SigFox applications
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +27 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-MKI139V5

Microphone coupon board based on the MP23AB01DH fully differential analog MEMS microphone

主要特性

  • 4 x MP23AB01DH bottom port analog MEMS microphones
  • Vsupply from 2.3 to 3.6 V
  • 135 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • Frequency range 100 Hz - 10 kHz
  • 65 dB of SNR
  • Sensitivity -38 dBFV ± 1 dBV
  • THD < 0.2% @ 94 dBSPL, 1 kHz
  • THD < 5% @ 130 dBSPL, 1 kHz
  • RoHS compliant

Show More

EVALSTDRV600HB8

Demonstration board kit for L638xE and L639x high-voltage gate drivers

主要特性

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

STEVAL-SPIN3202

STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board

主要特性

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

Show More

STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

主要特性

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

STEVAL-MKI182V1

ISM330DLC adapter board for a standard DIL24 socket

主要特性

  • Complete ISM330DLC pinout for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards
  • RoHS compliant

Show More

STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

主要特性

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

STEVAL-MKI185V1

IIS2MDC adapter board for a standard DIL24 socket

主要特性

  • Complete IIS2MDC pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109V3 motherboard
  • RoHS compliant

Show More

STEVAL-MIC001V1

Microphone coupon board based on the MP34DT05-A digital MEMS

主要特性

  • 4 x MP34DT05-A top port digital MEMS microphones
  • Daughterboard to be used with X-NUCLEO-CCA02M1
  • Vsupply from 1.6 to 3.6 V
  • 122.5 dBSPL acoustic overload point
  • Omnidirectional sensitivity
  • PDM single-bit output
  • 64 dB of SNR
  • Sensitivity -26 dBFS ±3 dB
  • RoHS compliant

Show More

STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for Wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX @ +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission, and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

STEVAL-FKI433V2

Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

主要特性

  • S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF module tuned for 430-470 MHz frequency bands
  • STM32 Nucleo-64 development board with STM32L0 MCU
  • Suitable for wireless M-Bus systems
  • Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
  • Programmable RF output power up to +16 dBm
  • Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
  • Air data rate from 0.3 to 500 kbps
  • Ultra-low power consumption:
    • 6.7 mA RX
    • 10 mA TX at +10 dBm
  • Excellent performance of receiver sensitivity (up to -130 dBm)
  • Low duty cycle RX/TX operation mode
  • Automatic acknowledgement, retransmission and timeout protocol engine
  • SPI interface for microcontroller
  • USB interface
  • RoHS compliant

Show More

X-NUCLEO-OUT02A1

Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo

主要特性

  • Based on the ISO8200AQ whose main characteristics are:
    • Embedded 4kV galvanic isolation
    • Radio frequency communication between the logic and process sides for maximum noise immunity
    • Very low power dissipation (RON(MAX) = 220 mΩ)
    • Fast decay for inductive loads
    • 20 MHz SPI I/F on logic side
    • VCC power good diagnostics
    • Overload and overheating protections with thermal shutdown and diagnostics
    • QFN-32L (9x11x1 mm) package
  • 10.5 to 33 V operating voltage range
  • Green LED (x8) for output on/off status
  • Red LED for process supply power good fault
  • Red LED for overload and overheating
  • Supply reverse polarity protection
  • EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connectors
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4428
      MEMS 麦克风生产过程中的最佳实践
      1.0
      988.63 KB
      PDF
      AN4694
      EMC design guides for motor control applications
      1.0
      2.13 MB
      PDF
      AN4373
      Galvanically-isolated 8 channel high-side driver based on the ISO8200B and ISO8200BQ
      2.0
      2.02 MB
      PDF
      AN4427
      旨在实现MEMS 麦克风最佳声学性能的垫片设计
      1.0
      1.19 MB
      PDF
      AN4544
      IGBT datasheet tutorial
      1.1
      2.4 MB
      PDF
      AN5080
      IIS2MDC:高精度、超低功耗、3轴数字输出磁力计
      1.0
      485.98 KB
      PDF
      AN5125
      ISM330DLC: 3D accelerometer and 3D gyroscope with digital output for industrial applications
      2.0
      1.62 MB
      PDF
      AN2648
      Increasing the resolution of analog temperature sensors
      1.4
      161.7 KB
      PDF
      AN4909
      Intelligent power switches for 48 V battery applications
      1.0
      1.07 MB
      PDF
      AN994
      L638xE application guide
      7.1
      560.1 KB
      PDF
      AN1299
      L638xE tricks and tips
      3.0
      718.2 KB
      PDF
      AN4290
      L647x, L648x and powerSTEP01 family communication protocol
      2.1
      486.67 KB
      PDF
      AN4602
      LIS3MDL: three-axis digital output magnetometer
      1.0
      584.14 KB
      PDF
      AN4193
      Low duty cycle operation with the SPIRIT1 transceiver
      2.0
      225.38 KB
      PDF
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN4158
      Peak current control with automatic decay adjustment and predictive current control: basics and setup
      2.1
      983.2 KB
      PDF
      AN4768
      SLLIMM™ 2nd series small low-loss intelligent molded module
      4.0
      23.7 MB
      PDF
      AN3338
      SLLIMM™ small low-loss intelligent molded module
      2.0
      3.21 MB
      PDF
      AN4198
      SPIRIT1: increasing the output power
      1.0
      387.86 KB
      PDF
      AN2684
      STEVAL-IFP006V1: designing with VNI4140K quad high-side smart power solid-state relay ICs
      1.2
      763.53 KB
      PDF
      AN4781
      STEVAL-IFP028V1 evaluation board for single high-side driver IPS160H
      2.0
      3.82 MB
      PDF
      AN4998
      STEVAL-IFP034V1 evaluation board for the IPS161H single high side driver
      2.0
      6.08 MB
      PDF
      AN4999
      STSPIN32F0过电流保护
      1.0
      893.87 KB
      PDF
      AN5128
      STSPIN32F0/F0A - buck converter
      1.0
      334.87 KB
      PDF
      AN5123
      STSPIN32F0A - bootloader and USART protocol
      1.0
      265.82 KB
      PDF
      AN4426
      Tutorial for MEMS microphones
      2.0
      947.08 KB
      PDF
      AN4076
      Two or three shunt resistor based current sensing circuit design in 3-phase inverters
      1.6
      1.17 MB
      PDF
      AN4144
      Voltage mode control operation and parameter optimization
      4.0
      1.3 MB
      PDF
      AN4772
      wM-Bus (2013) firmware stack overview
      1.0
      786.08 KB
      PDF
      AN4428

      MEMS 麦克风生产过程中的最佳实践

      AN4694

      EMC design guides for motor control applications

      AN4373

      Galvanically-isolated 8 channel high-side driver based on the ISO8200B and ISO8200BQ

      AN4427

      旨在实现MEMS 麦克风最佳声学性能的垫片设计

      AN4544

      IGBT datasheet tutorial

      AN5080

      IIS2MDC:高精度、超低功耗、3轴数字输出磁力计

      AN5125

      ISM330DLC: 3D accelerometer and 3D gyroscope with digital output for industrial applications

      AN2648

      Increasing the resolution of analog temperature sensors

      AN4909

      Intelligent power switches for 48 V battery applications

      AN994

      L638xE application guide

      AN1299

      L638xE tricks and tips

      AN4290

      L647x, L648x and powerSTEP01 family communication protocol

      AN4602

      LIS3MDL: three-axis digital output magnetometer

      AN4193

      Low duty cycle operation with the SPIRIT1 transceiver

      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN4158

      Peak current control with automatic decay adjustment and predictive current control: basics and setup

      AN4768

      SLLIMM™ 2nd series small low-loss intelligent molded module

      AN3338

      SLLIMM™ small low-loss intelligent molded module

      AN4198

      SPIRIT1: increasing the output power

      AN2684

      STEVAL-IFP006V1: designing with VNI4140K quad high-side smart power solid-state relay ICs

      AN4781

      STEVAL-IFP028V1 evaluation board for single high-side driver IPS160H

      AN4998

      STEVAL-IFP034V1 evaluation board for the IPS161H single high side driver

      AN4999

      STSPIN32F0过电流保护

      AN5128

      STSPIN32F0/F0A - buck converter

      AN5123

      STSPIN32F0A - bootloader and USART protocol

      AN4426

      Tutorial for MEMS microphones

      AN4076

      Two or three shunt resistor based current sensing circuit design in 3-phase inverters

      AN4144

      Voltage mode control operation and parameter optimization

      AN4772

      wM-Bus (2013) firmware stack overview

    • 描述 版本 文档大小 操作
      TN1220
      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)
      1.0
      604.33 KB
      PDF
      TN0107
      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)
      4.0
      698.06 KB
      PDF
      TN0018
      LGA 封装中MEMS 传感器的表面贴装指南
      1.0
      251.2 KB
      PDF
      TN1220

      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)

      TN0107

      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)

      TN0018

      LGA 封装中MEMS 传感器的表面贴装指南

    • 描述 版本 文档大小 操作
      UM1036
      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60
      2.0
      1.58 MB
      PDF
      UM0969
      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A
      2.0
      3.07 MB
      PDF
      UM2325
      ST PowerStudio dynamic electrothermal simulation software for power devices
      2.0
      2.93 MB
      PDF
      UM1036

      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60

      UM0969

      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A

      UM2325

      ST PowerStudio dynamic electrothermal simulation software for power devices

    • 描述 版本 文档大小 操作
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.1
      1.78 MB
      PDF
      PM0257
      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南
      1.0
      1.33 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1、BlueNRG-2 BLE 栈v2.x 编程指南

演示和培训资料

    • 描述 版本 文档大小 操作
      An introduction to electric motors 1.0
      2.23 MB
      PDF
      ST PowerStudio overview 1.0
      1.81 MB
      PDF
      STSPIN configurable gate driving circuitry 1.0
      379.9 KB
      PDF
      STSPIN logic core basics 1.0
      1.22 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      An introduction to electric motors

      ST PowerStudio overview

      STSPIN configurable gate driving circuitry

      STSPIN logic core basics

      X-NUCLEO-IDB05A1 Quick start guide

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series 1.0
      516.44 KB
      PDF
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      714.73 KB
      PDF
      BlueNRG-2 新一代蓝牙低功耗片上系统 3.0
      222.22 KB
      PDF
      DC-DC converters
      557.92 KB
      PDF
      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V) 1.0
      975.08 KB
      PDF
      IPS160H/IPS161H - Ready for tomorrow’s factory automation 08.2017
      341.83 KB
      PDF
      ISO8200BQ - Leading innovation for industrial automation 08.2017
      363.54 KB
      PDF
      Integrated stepper motor driver delivers up to 10 A with superior smoothness and accurate positioning
      1.42 MB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      集成32位MCU、7x7 mm QFN 马达驱动IC 2.2017
      755.37 KB
      PDF
      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器 3.0
      824.66 KB
      PDF
      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules 1.0
      1.14 MB
      PDF
      ST Diodes Finder : the new app for Android and iOS 2.0
      1.46 MB
      PDF
      ST Thyristor Finder: SCRs and Triacs on Android and iOS 1.0
      854.07 KB
      PDF

      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 新一代蓝牙低功耗片上系统

      DC-DC converters

      Field-Effect Rectifier Diodes Advantageously replace Schottky (60V and 100V)

      IPS160H/IPS161H - Ready for tomorrow’s factory automation

      ISO8200BQ - Leading innovation for industrial automation

      Integrated stepper motor driver delivers up to 10 A with superior smoothness and accurate positioning

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      集成32位MCU、7x7 mm QFN 马达驱动IC

      s2-LP:超低功耗、高性能、Sub-1 HGz RF收发器

      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules

      ST Diodes Finder : the new app for Android and iOS

      ST Thyristor Finder: SCRs and Triacs on Android and iOS

    • 描述 版本 文档大小 操作
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      Thyristors, Triacs, AC switches and A.S.D™ selection guide 2.0
      1.51 MB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

      Thyristors, Triacs, AC switches and A.S.D™ selection guide

    • 描述 版本 文档大小 操作
      Intelligent power switches (IPS) 04.2018
      4.21 MB
      PDF
      Motor Control Reference Guide 15.10
      7.15 MB
      PDF
      Products and solutions for Smart industry 3.0
      3.32 MB
      PDF

      Intelligent power switches (IPS)

      Motor Control Reference Guide

      Products and solutions for Smart industry

    • 描述 版本 文档大小 操作
      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control 1.0
      5.54 MB
      PDF
      Smart solution for high end stepper motor driver 1.0
      264.21 KB
      PDF

      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control

      Smart solution for high end stepper motor driver

软件

    • 产品型号

      Bluetooth Low Energy software expansion for STM32Cube

      STM32 Motor Control Software Development Kit (MCSDK)

      High power stepper motor driver software expansion for STM32Cube

      Sub-1 GHz RF communication software expansion for STM32Cube

    • 产品型号

      Standard C platform-independent drivers for MEMS motion and environmental sensors

    • 产品型号

      Firmware library for L6480, L6482 stepper motor drivers

      Six-step motor driving library for STSPIN32F0 and STSPIN32F0A

    • 产品型号

      STSW-BNRG-S2LP evaluation software package based on BlueNRG-1 and S2-LP

      BlueNRG current consumption estimation tool

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Audio ICs

产品型号 描述
MP34DT05-A MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
产品型号
MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP

EMI Filtering and Signal Conditioning

产品型号 描述
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
产品型号
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter

Imaging and Photonics Solutions

产品型号 描述
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
产品型号
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

Interfaces and Transceivers

产品型号 描述
STUSB1602 USB Type-C controller (with Tx/Rx line driver and BMC)
STUSB4500 Stand-alone USB PD controller (with sink Auto-run mode)
产品型号
USB Type-C controller (with Tx/Rx line driver and BMC)
Stand-alone USB PD controller (with sink Auto-run mode)

MEMS and Sensors

产品型号 描述
IIS2DH 3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
IIS2MDC High accuracy, ultra-low-power ,3-axis digital output magnetometer
ISM330DLC iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications
LIS3MDL 3-axis MEMS magnetic field sensor, digital output, I2C, SPI, low power mode, high performance
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751 2.25 V low-voltage local digital temperature sensor
产品型号
3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
High accuracy, ultra-low-power ,3-axis digital output magnetometer
iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications
3-axis MEMS magnetic field sensor, digital output, I2C, SPI, low power mode, high performance
Analog temperature sensor, ultra-low current 2.4 V, high precision
2.25 V low-voltage local digital temperature sensor

Motor Drivers

产品型号 描述
L6472 Fully integrated microstepping motor driver with motion engine and SPI
L6482 Fully integrated microstepping motor controller with motion engine and SPI
STSPIN32F0A Advanced BLDC controller with embedded STM32 MCU
powerSTEP01 System-in-package integrating microstepping controller and 10 A power MOSFETs
产品型号
Fully integrated microstepping motor driver with motion engine and SPI
Fully integrated microstepping motor controller with motion engine and SPI
Advanced BLDC controller with embedded STM32 MCU
System-in-package integrating microstepping controller and 10 A power MOSFETs

电源管理

产品型号 描述
IPS160H Single high-side switch for safety integrity level (SIL2 and SIL3) compliant systems
IPS161H Single high-side switch for safety integrity level (SIL2 and SIL3) compliant systems
ISO8200B Galvanic isolated octal high side smart power solid state relay
ISO8200BQ Galvanic isolated octal high-side smart power solid state-relay
L6370Q 2.5 A single high-side smart power switch
L6398 High voltage high and low-side driver
L6985F 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
L6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
L7985 2A step-down switching regulator
L7986 3A step-down switching regulator
L7987 61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
L7987L 61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
ST1S14 Up to 3 A step down switching regulator
VN751PT High side driver
VNI2140J Dual high side smart power solid state relay
VNI4140K Quad high-side smart power solid-state relay
VNI8200XP Octal high side smart power solid state relay with serial/parallel selectable interface on chip
产品型号
Single high-side switch for safety integrity level (SIL2 and SIL3) compliant systems
Single high-side switch for safety integrity level (SIL2 and SIL3) compliant systems
Galvanic isolated octal high side smart power solid state relay
Galvanic isolated octal high-side smart power solid state-relay
2.5 A single high-side smart power switch