概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始

Digital Addressable Lighting Interface (DALI) is a trademark for a network-based technology used to effectively control lighting in building automation. Originally defined in IEC 60929 standards, it’s updated in IEC 62386 which includes LED device types.

We provide a range of analog and digital controllers and STM32 microcontrollers to implement the AC-DC and DC-DC power converter and run the DALI protocol.

产品型号
描述
STEVAL-ILM001V1 Plug-in hardware module for the STM8S-DISCOVERY interface for DALI communication Quick view

主要特性

  • Level translation from DALI voltage levels (-6.5 to 22.5 V) to microcontroller levels (3.3 V / 5 V logic)
  • Proper rise/fall times for the communication
  • Current consumption limit (2 mA max.)
  • Overvoltage protection for misconnection of rated mains voltage to DALI DA connectors
  • RoHS compliant

Show More

STEVAL-ILL075V1 STLUX385A evaluation board Quick view

主要特性

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

Show More

STEVAL-ILL066V2 100 W LED street lighting evaluation board using the STLUX385A digital controller Quick view

主要特性

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

Show More

STEVAL-ILL078V1 1 A, up to 60V Vin, buck LED driver board based on the LED6000 Quick view

主要特性

  • 4.5 V to 60 V input voltage
  • Step-down conversion
  • 1 A programmed LED current
  • 500 kHz switching frequency
  • Digital dimming
  • Uses ceramic output capacitors
  • 180° out-of-phase synchronization available
  • Auto-recovery overcurrent and thermal protection
  • RoHS compliant

Show More

产品型号
STEVAL-ILM001V1

Plug-in hardware module for the STM8S-DISCOVERY interface for DALI communication

主要特性

  • Level translation from DALI voltage levels (-6.5 to 22.5 V) to microcontroller levels (3.3 V / 5 V logic)
  • Proper rise/fall times for the communication
  • Current consumption limit (2 mA max.)
  • Overvoltage protection for misconnection of rated mains voltage to DALI DA connectors
  • RoHS compliant

Show More

STEVAL-ILL075V1

STLUX385A evaluation board

主要特性

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

Show More

STEVAL-ILL066V2

100 W LED street lighting evaluation board using the STLUX385A digital controller

主要特性

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

Show More

STEVAL-ILL078V1

1 A, up to 60V Vin, buck LED driver board based on the LED6000

主要特性

  • 4.5 V to 60 V input voltage
  • Step-down conversion
  • 1 A programmed LED current
  • 500 kHz switching frequency
  • Digital dimming
  • Uses ceramic output capacitors
  • 180° out-of-phase synchronization available
  • Auto-recovery overcurrent and thermal protection
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN5274
      EVALKITSTKNX user guide and performances report
      2.0
      12.79 MB
      PDF
      AN4406
      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies
      1.0
      652.78 KB
      PDF
      AN3298
      STM8S DALI slave library
      1.4
      391.05 KB
      PDF
      AN5274

      EVALKITSTKNX user guide and performances report

      AN4406

      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies

      AN3298

      STM8S DALI slave library

    • 描述 版本 文档大小 操作
      UM1032
      STEVAL-ILM001V1 hardware module for the STM8S-DISCOVERY interface for DALI communication
      1.1
      438.54 KB
      PDF
      UM1728
      STM32F1xx DALI slave interface
      1.0
      1.87 MB
      PDF
      UM1629
      STM32L1xx DALI slave interface
      1.0
      1.08 MB
      PDF
      UM1032

      STEVAL-ILM001V1 hardware module for the STM8S-DISCOVERY interface for DALI communication

      UM1728

      STM32F1xx DALI slave interface

      UM1629

      STM32L1xx DALI slave interface

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      STLUX385A 100 W LED street lighting 1.0
      2.02 MB
      PDF
      STLUX: Intelligent lighting made easy 07.2017
      280.46 KB
      PDF

      STLUX385A 100 W LED street lighting

      STLUX: Intelligent lighting made easy

    • 描述 版本 文档大小 操作
      Products and solutions for Smart industry 3.0
      3.32 MB
      PDF

      Products and solutions for Smart industry

开发工具硬件

软件

    • 产品型号

      STM8S DALI library example (AN3298)

Interfaces and Transceivers

产品型号 描述
STKNX Miniature KNX transceiver with voltage regulators
产品型号
Miniature KNX transceiver with voltage regulators

电源管理

产品型号 描述
LED6000 3 A, 61 V monolithic current source with dimming capability
STLUX285A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX325A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX385A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
产品型号
3 A, 61 V monolithic current source with dimming capability
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI

Power Transistors

产品型号 描述
STF10N60M2 N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
STF13N60M2 N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
STF7N60M2 N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in TO-220FP package
STL20DN10F7 Dual N-channel 100 V, 0.065 Ohm typ., 5 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island
STL7N10F7 N-channel 100 V, 0.027 Ohm typ., 7 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
产品型号
N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in TO-220FP package
Dual N-channel 100 V, 0.065 Ohm typ., 5 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island
N-channel 100 V, 0.027 Ohm typ., 7 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
支持中心或 提供反馈