LED路灯

搜索历史

Please log in to show your saved searches.

概述

解决方案

硬件评估工具

资源

工具和软件

主要产品

开始

快速链接

Street lighting installations have evolved from providing basic – and energy-hungry – illumination to become a central part in enabling a set of services – including presence and traffic level monitoring and incident detection surveillance not to mention optimizing of illumination levels to specific road and weather conditions – to help administrations turn a city into a Smart City.

We have a broad range of wired and wireless connectivity, power management and supply and LED driving solutions together with a range of high-performance and low-power STM32 microcontrollers together with presence, proximity, camera and environmental sensors as well as MEMS microphones to enable design advanced street lighting systems.

产品型号	描述
STEVAL-ILL070V4	35 W dimmable single string LED driver using HVLED001A and STF10LN80K5	Quick view 主要特性 Input voltage: V_IN = 90 - 305 V_rms , f: 45 - 66 Hz Output current: 700 mA (V_LED = 24 V to 48 V) Dimming: 100% to 10% Dimming interfaces: 0 - 10 V and PWM input High power factor, low THD Efficiency: > 90% @ full load Open load voltage limiting (52.4 V) Optional remote turn-off input Optional 3.3 V – 0.1 A voltage regulator Fast V_OUT discharge RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics Gerber
STEVAL-ILL074V2	60 W wide input range flyback converter using HVLED001A controller in FOT mode	Quick view 主要特性 Input voltage: V_in = 90 - 277 V_rms , f = 45-66 Hz Output voltage: 52 V / 1.2 A High power factor, low THD Full load efficiency: above 90% Short circuit protection Safety: compliant with EN60065 PCB board: 165 mm x 50 mm double-sided PCB RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ISA158V1	38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986	Quick view 主要特性 4 V to 38 V operating input voltage Low consumption mode or low noise mode 30 µA I_Q at light load (LCM V_OUT = 3.3 V) 5 µA I_Q-SHTDWN Adjustable f_SW (250 kHz - 2 MHz) Output voltage adjustable from 0.85 V to V_IN Embedded output voltage supervisor Synchronization Adjustable soft-start time Internal current limiting Overvoltage protection Output voltage sequencing Peak current mode architecture R_DS(on)HS = 180 mΩ; R_DS(on)LS = 150 mΩ Thermal shutdown RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
32F3348DISCOVERY	Discovery kit with STM32F334C8 MCU	Quick view 主要特性 STM32F334C8T6 microcontroller featuring 64 KB of Flash memory, 16 KB RAM in an LQFP48 package. On-board ST-LINK/V2-1 with selection mode switch to use the kit as a standalone ST-LINK/V2-1 (with SWD connector for programming and debugging). mbed^™ -enabled (mbed.org) USB ST-LINK with re-enumeration capability and three different interfaces: virtual com port mass storage debug port Board power supply: through USB bus or from an external 5 V supply voltage. External application power supply: 3 V and 5 V. High brightness LED dimming with buck converter. One buck / boost converter. Six LEDs: LD1 (red) for 3.3 V power on LD2 (red/green) for USB communication Four user LEDs: LD3 (red), LD4 (orange), LD5 (green) and LD6 (blue). Two pushbuttons (user and reset). Extension header for LQFP48 I/Os for a quick connection to the prototyping board and easy probing. Comprehensive free software including a variety of examples, part of STM32CubeF3 package or STSW-STM32148 for legacy Standard Library usage. Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ISA152V1	3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987	Quick view 主要特性 3.3 V output voltage 3 A DC output current 4.5 V to 60 V input voltage 500 kHz switching frequency 3.5 ms programmed soft-start VBIAS switch-over for improved efficiency at light load 180° out of phase synchronization available Open drain PGOOD available Auto recovery overcurrent and thermal protection RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ILL043V1	High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings	Quick view 主要特性 Mains voltage range V_ACmin = 165V_ac , V_ACmax = 277 V_ac Minimum mains frequency fl = 47 Hz DC output voltage V_out = 65 V Maximum output current I_out = 1.5 A Maximum 2fL output ripple ΔVO% = 1.0% Minimum switching frequency f_swmin = 40 KHz Expected efficiency: 90% RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ISA084V1	4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40	Quick view 主要特性 V_in : 4 V to 18 V Vout: 3.3 V Maximum output current: 4 A Switching frequency: 800 kHz Short-circuit: protected RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ISA095V1	Up to 3 A step-down switching regulator based on the ST1S14	Quick view 主要特性 3 A DC output current Operating input voltage from 5.5 V to 48 V 850 kHz internally fixed switching frequency Internal soft-start Internal current limiting Inhibit for zero current consumption 2 mA maximum quiescent current over-temperature range Thermal shutdown RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ILL013V1	80 W offline PFC and LED driver demonstration board with dimming based on the L6562A	Quick view 主要特性 EN55015 and EN61000-3-2 compliant EMI filter implemented Non-isolated SMPS Universal PWM input for dimming (external board required) 80 W LED driver High efficiency (~90%) 350 mA, 700 mA and 1 A LED current settings High power factor: 0.982 for 230 V/50 Hz AC Brightness regulation between 0 and 100% Wide input voltage range: 88 V to 265 VAC Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-VP013B1B	5 V / 100 mA high voltage optimized buck-converter based on VIPer013BLS	Quick view 主要特性 Buck topology Input power consumption: 20 mW at 230 V_AC in no load condition 400 mW at 230 V_AC in 250 mW load Input voltage: 60 to 300 V_AC Output voltage: 5 V Output current: 100 mA Switching frequency: 60 kHz with jittering Max ambient. temperature: 60 °C Automatic restart protections: OLP, short-circuit, VCC clamp, max duty cycle counter, thermal shutdown Pulse-skip protection to prevent flux-runaway Dimensions: 27 mm x 24 mm Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature VIPer013B 800V avalanche rugged technology and embedded protections ensure enhanced system reliability RoHS compliant Show More Product Details 下载产品简介图片
EVALSTDRIVE601	EVALSTRIVE601	Quick view 主要特性 High voltage rail up to 600V Driver supply input voltage range 9V-20V STGD6M65DF2 IGBTs power stage featuring: V_(BR)CES = 650 V V_CE(sat) = 1.55 V @ I_C = 6 A Dual footprint for IGBT/MOSFET package: DPAK PowerFlat 8x8 Selectable single or 3-shunt current sensing topology: Sensored or sensorless BEMF detection FOC or 6-Step algorithm SmartShutdown overcurrent protection Hall effect sensors connector Bus voltage sensing 450V bulk capacitor Connector for interfacing with MCU RoHS compliant Show More Product Details 下载产品简介图片
STEVAL-ILL053V2	48 V - 130 W high efficiency converter with PFC for LED street lighting applications based on L6562 and L6599	Quick view 主要特性 Extended input mains range: 85 to 305 V_AC - frequency 45 to 55 Hz Output voltage: 48 V at 2.7 A Long-life: electrolytic capacitors not used Mains harmonics in accordance with EN61000-3-2 Class C Efficiency at full load greater than 91% at 115 V_AC EMI in accordance with EN55022 Class B; EN55015 Safety: double insulation, in accordance with EN60950, SELV Dimensions: 75 x 135 mm, 30 mm maximum component height PCB: single side, 35 μm, FR-4, mixed PTH/SMT RoHS compliant WEEE compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-ILL066V2	100 W LED street lighting evaluation board using the STLUX385A digital controller	Quick view 主要特性 based on STLUX385A digital controller high efficiency (92%) primary side controlled up to 100 W (100 V at 1 A or 200 V at 0.5 A) single isolated output suitable for LED connection wide input voltage range: 90 V to 265 V AC adjustable LED current and dimming output resolution: 11-bit equivalent IDLE mode power consumption: < 250 mW real-time fault detection and protection (short-circuit or open circuit) remote control via: DALI ed.2.0 0 - 10 V UART RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-VP26K01B	15 V / 100 mA high voltage buck converter reference design based on VIPER26K	Quick view 主要特性 Ultra-wide range: 90–600 V_AC or 60–870 V_DC Frequency: 50-60 Hz Output voltage: 15 V Output current: 100 mA Very compact size Tight line and load regulation over the entire input and output range Meets IEC55022 Class B conducted EMI even with a reduced EMI filter, thanks to the frequency jittering feature RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber
STEVAL-LLL004V1	75 W digitally controlled constant current LED driver reference design	Quick view 主要特性 Wide input voltage range 85 – 265 V_AC Transition Mode PFC Two constant current outputs working in transition mode based on different topologies: Buck topology Inverse buck topology Output current: 500 mA ±2.5% Number of LEDs connected at output: 16 – 24 white LEDs (3.3 V each) PFC > 0.97 and THD < 20% at full load with input voltage 85-265 V_AC Peak Efficiency at maximum load ≅ 90% Comprehensive safety protections: Open/no-load circuit protection Short-/overload circuit protection Soft start implementation LED dimming range: 0.5% to 100% Analog dimming Digital dimming Dimming control options: Push button 0-10 V input Meets EN55022 Class B WEEE and RoHS compliant Show More Product Details 下载产品简介图片特色资源 Schematics BOM Gerber

产品型号

STEVAL-ILL070V4

35 W dimmable single string LED driver using HVLED001A and STF10LN80K5

快速查看

主要特性

Input voltage: V_IN = 90 - 305 V_rms , f: 45 - 66 Hz
Output current: 700 mA (V_LED = 24 V to 48 V)
Dimming: 100% to 10%
Dimming interfaces: 0 - 10 V and PWM input
High power factor, low THD
Efficiency: > 90% @ full load
Open load voltage limiting (52.4 V)
Optional remote turn-off input
Optional 3.3 V – 0.1 A voltage regulator
Fast V_OUT discharge
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics Gerber

STEVAL-ILL074V2

60 W wide input range flyback converter using HVLED001A controller in FOT mode

快速查看

主要特性

Input voltage: V_in = 90 - 277 V_rms , f = 45-66 Hz
Output voltage: 52 V / 1.2 A
High power factor, low THD
Full load efficiency: above 90%
Short circuit protection
Safety: compliant with EN60065
PCB board: 165 mm x 50 mm double-sided PCB
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

快速查看

主要特性

4 V to 38 V operating input voltage
Low consumption mode or low noise mode
30 µA I_Q at light load (LCM V_OUT = 3.3 V)
5 µA I_Q-SHTDWN
Adjustable f_SW (250 kHz - 2 MHz)
Output voltage adjustable from 0.85 V to V_IN
Embedded output voltage supervisor
Synchronization
Adjustable soft-start time
Internal current limiting
Overvoltage protection
Output voltage sequencing
Peak current mode architecture
R_DS(on)HS = 180 mΩ; R_DS(on)LS = 150 mΩ
Thermal shutdown
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

32F3348DISCOVERY

Discovery kit with STM32F334C8 MCU

快速查看

主要特性

STM32F334C8T6 microcontroller featuring 64 KB of Flash memory, 16 KB RAM in an LQFP48 package.
On-board ST-LINK/V2-1 with selection mode switch to use the kit as a standalone ST-LINK/V2-1 (with SWD connector for programming and debugging).
mbed^™ -enabled (mbed.org)
USB ST-LINK with re-enumeration capability and three different interfaces:
- virtual com port
- mass storage
- debug port
Board power supply: through USB bus or from an external 5 V supply voltage.
External application power supply: 3 V and 5 V.
High brightness LED dimming with buck converter.
One buck / boost converter.
Six LEDs:
- LD1 (red) for 3.3 V power on
- LD2 (red/green) for USB communication
- Four user LEDs: LD3 (red), LD4 (orange), LD5 (green) and LD6 (blue).
Two pushbuttons (user and reset).
Extension header for LQFP48 I/Os for a quick connection to the prototyping board and easy probing.
Comprehensive free software including a variety of examples, part of STM32CubeF3 package or STSW-STM32148 for legacy Standard Library usage.

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

快速查看

主要特性

3.3 V output voltage
3 A DC output current
4.5 V to 60 V input voltage
500 kHz switching frequency
3.5 ms programmed soft-start
VBIAS switch-over for improved efficiency at light load
180° out of phase synchronization available
Open drain PGOOD available
Auto recovery overcurrent and thermal protection
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ILL043V1

High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings

快速查看

主要特性

Mains voltage range V_ACmin = 165V_ac , V_ACmax = 277 V_ac
Minimum mains frequency fl = 47 Hz
DC output voltage V_out = 65 V
Maximum output current I_out = 1.5 A
Maximum 2fL output ripple ΔVO% = 1.0%
Minimum switching frequency f_swmin = 40 KHz
Expected efficiency: 90%
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ISA084V1

4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40

快速查看

STEVAL-ISA095V1

Up to 3 A step-down switching regulator based on the ST1S14

快速查看

主要特性

3 A DC output current
Operating input voltage from 5.5 V to 48 V
850 kHz internally fixed switching frequency
Internal soft-start
Internal current limiting
Inhibit for zero current consumption
2 mA maximum quiescent current over-temperature range
Thermal shutdown
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ILL013V1

80 W offline PFC and LED driver demonstration board with dimming based on the L6562A

快速查看

主要特性

EN55015 and EN61000-3-2 compliant
EMI filter implemented
Non-isolated SMPS
Universal PWM input for dimming (external board required)
80 W LED driver
High efficiency (~90%)
350 mA, 700 mA and 1 A LED current settings
High power factor: 0.982 for 230 V/50 Hz AC
Brightness regulation between 0 and 100%
Wide input voltage range: 88 V to 265 VAC

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-VP013B1B

5 V / 100 mA high voltage optimized buck-converter based on VIPer013BLS

快速查看

主要特性

Buck topology
Input power consumption:
- 20 mW at 230 V_AC in no load condition
- 400 mW at 230 V_AC in 250 mW load
Input voltage: 60 to 300 V_AC
Output voltage: 5 V
Output current: 100 mA
Switching frequency: 60 kHz with jittering
Max ambient. temperature: 60 °C
Automatic restart protections: OLP, short-circuit, VCC clamp, max duty cycle counter, thermal shutdown
Pulse-skip protection to prevent flux-runaway
Dimensions: 27 mm x 24 mm
Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
VIPer013B 800V avalanche rugged technology and embedded protections ensure enhanced system reliability
RoHS compliant

Product Details 下载产品简介

图片

EVALSTDRIVE601

EVALSTRIVE601

快速查看

主要特性

High voltage rail up to 600V
Driver supply input voltage range 9V-20V
STGD6M65DF2 IGBTs power stage featuring:
- V_(BR)CES = 650 V
- V_CE(sat) = 1.55 V @ I_C = 6 A
Dual footprint for IGBT/MOSFET package:
- DPAK
- PowerFlat 8x8
Selectable single or 3-shunt current sensing topology:
- Sensored or sensorless BEMF detection
- FOC or 6-Step algorithm
SmartShutdown overcurrent protection
Hall effect sensors connector
Bus voltage sensing
450V bulk capacitor
Connector for interfacing with MCU
RoHS compliant

Product Details 下载产品简介

图片

STEVAL-ILL053V2

48 V - 130 W high efficiency converter with PFC for LED street lighting applications based on L6562 and L6599

快速查看

主要特性

Extended input mains range: 85 to 305 V_AC - frequency 45 to 55 Hz
Output voltage: 48 V at 2.7 A
Long-life: electrolytic capacitors not used
Mains harmonics in accordance with EN61000-3-2 Class C
Efficiency at full load greater than 91% at 115 V_AC
EMI in accordance with EN55022 Class B; EN55015
Safety: double insulation, in accordance with EN60950, SELV
Dimensions: 75 x 135 mm, 30 mm maximum component height
PCB: single side, 35 μm, FR-4, mixed PTH/SMT
RoHS compliant
WEEE compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-ILL066V2

100 W LED street lighting evaluation board using the STLUX385A digital controller

快速查看

主要特性

based on STLUX385A digital controller
high efficiency (92%)
primary side controlled
up to 100 W (100 V at 1 A or 200 V at 0.5 A)
single isolated output suitable for LED connection
wide input voltage range: 90 V to 265 V AC
adjustable LED current and dimming
output resolution: 11-bit equivalent
IDLE mode power consumption: < 250 mW
real-time fault detection and protection (short-circuit or open circuit)
remote control via:
- DALI ed.2.0
- 0 - 10 V
- UART
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-VP26K01B

15 V / 100 mA high voltage buck converter reference design based on VIPER26K

快速查看

主要特性

Ultra-wide range: 90–600 V_AC or 60–870 V_DC
Frequency: 50-60 Hz
Output voltage: 15 V
Output current: 100 mA
Very compact size
Tight line and load regulation over the entire input and output range
Meets IEC55022 Class B conducted EMI even with a reduced EMI filter, thanks to the frequency jittering feature
RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

STEVAL-LLL004V1

75 W digitally controlled constant current LED driver reference design

快速查看

主要特性

Wide input voltage range 85 – 265 V_AC
Transition Mode PFC
Two constant current outputs working in transition mode based on different topologies:
- Buck topology
- Inverse buck topology
Output current: 500 mA ±2.5%
- Number of LEDs connected at output: 16 – 24 white LEDs (3.3 V each)
PFC > 0.97 and THD < 20% at full load with input voltage 85-265 V_AC
Peak Efficiency at maximum load ≅ 90%
Comprehensive safety protections:
- Open/no-load circuit protection
- Short-/overload circuit protection
Soft start implementation
LED dimming range: 0.5% to 100%
- Analog dimming
- Digital dimming
Dimming control options:
- Push button
- 0-10 V input
Meets EN55022 Class B
WEEE and RoHS compliant

Product Details 下载产品简介

图片

特色资源

Schematics BOM Gerber

00 选择要下载的文档

技术文档

应用手册

描述	版本	文档大小	操作
AN4461 100 W LED street lighting application using STLUX385A	4.0	1.81 MB	PDF
AN5316 35 W wide input range flyback converter using HVLED001B quasi resonant Flyback controller and STF10LN80K5	1.0	2.8 MB	PDF
AN5335 35W transition-mode flyback converter with ultra-low THD based on HVLED007	1.1	3.36 MB	PDF
AN3105 48 V - 130 W high efficiency converter with PFC for LED street lighting applications - European version	2.0	3.52 MB	PDF
AN3106 48 V - 130 W high-efficiency converter with PFC for LED street lighting applications	3.1	1.17 MB	PDF
AN2644 An introduction to LLC resonant half-bridge converter	2.0	1.27 MB	PDF
AN4656 Bootloading procedure for STLUX™ and STNRG™ digital controllers	2.0	635.41 KB	PDF
AN2983 Constant current inverse buck LED driver using L6562A	1.3	1.9 MB	PDF
AN5351 EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications	1.0	6.21 MB	PDF
AN2680 Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU	1.4	125.82 KB	PDF
AN4250 Fishbone diagram for power factor correction	1.1	772.32 KB	PDF
AN4539 HRTIM 指南	1.0	911.33 KB	PDF
AN4932 HVLED001A - enhanced QR high power factor flyback controller for LED drivers	2.0	3.01 MB	PDF
AN4885 High brightness LED dimming using the STM32F334 Discovery kit	1.1	594.69 KB	PDF
AN5119 How to design an application from draft with STNRG011	1.0	343.37 KB	PDF
AN2648 Increasing the resolution of analog temperature sensors	1.4	161.7 KB	PDF
AN2450 LLC resonant half-bridge converter design guideline	6.0	746.74 KB	PDF
AN4406 MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies	1.0	652.78 KB	PDF
AN5046 Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages	4.0	4.82 MB	PDF
AN5336 ST8500 host interface driver	1.0	978.47 KB	PDF
AN2946 Solar-LED streetlight controller with 25 W LED lamp driver and 85 W battery charger based on the STM32F101Rx	2.4	1.22 MB	PDF

AN4461

100 W LED street lighting application using STLUX385A

产品型号	描述
TSV911	Wide-bandwidth (8MHz) rail to rail input/output 5V CMOS Op-Amp, single
TSZ121	Very high accuracy (5 uV) zero drift 5 V CMOS Op-Amp, single, GBP=400kHz
TSZ181	Very high accuracy (25 uV) zero drift 5V CMOS Op-Amps
TSZ182	Very high accuracy (25 uV) zero drift 5V CMOS Op-Amps

产品型号	描述
LM135	Precision Temperature Sensor
LM235	Precision Temperature Sensor
LM335	Precision Temperature Sensor
STDS75	Digital temperature sensor and thermal watchdog
STLM20	Analog temperature sensor, ultra-low current 2.4 V, high precision
STLM75	High-precision digital temperature sensor and thermal watchdog
STTS2004	2.2 V memory module temperature sensor with a 4 Kb SPD EEPROM
STTS75	Digital temperature sensor and thermal watchdog, delta-sigma analog-to-digital (ADC) converter, I2C interface
STTS751	2.25 V low-voltage local digital temperature sensor

产品型号	描述
HVLED001A	Offline controller for LED lighting with constant voltage primary-sensing and high power factor
HVLED001B	High power factor flyback controller with constant voltage primary sensing and ultra low standby consumption
HVLED002	High performance current mode LED controller
HVLED805	Off-line LED driver with primary-sensing up to 5W
L6562A	Transition-mode PFC controller BCD technology
L6562AT	Transition-mode PFC controller
L6563	Advanced transition-mode PFC controller
L6563H	High voltage start-up transition-mode PFC
L6563S	Enhanced transition-mode PFC controller
L6564	10 pin transition-mode PFC controller
L6564H	High voltage start-up transition-mode PFC
L6564T	10 pin transition-mode PFC controller for outdoor applications
L6599A	Improved high-voltage resonant controller
L6599AF	Ultra-extreme temperature range improved high voltage resonant controller
L6599AT	IMPROVED HIGH-VOLTAGE RESONANT CONTROLLER
L6699	Enhanced high-voltage resonant controller
L6985F	38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986	38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
L6986F	38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
L7987	61 V 3 A asynchronous step-down switching regulator with adjustable current limitation
L7987L	61 V 2 A asynchronous step-down switching regulator with adjustable current limitation
SRK2000A	Synchronous rectifier smart driver for LLC resonant converters
SRK2001A	Adaptive synchronous rectification controller for LLC resonant converter
ST1S14	Up to 3 A step down switching regulator
ST1S40	3A DC step-down switching regulator
ST1S41	4 A step-down switching regulator
STCMB1	TM PFC with X-cap discharge and LLC resonant combo controller
STLUX285A	Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX325A	Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX385A	Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STNRG011	Digital combo multi-mode PFC and time-shift LLC resonant controller

产品型号	描述
STF13N60M2	N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
STF15N65M5	N-channel 650 V, 0.308 Ohm typ., 11 A MDmesh M5 Power MOSFET in TO-220FP package
STF16N60M2	N-channel 600 V, 0.28 Ohm typ., 12 A MDmesh M2 Power MOSFET in TO-220FP package
STF18N60M2	N-channel 600 V, 0.255 Ohm typ., 13 A MDmesh M2 Power MOSFET in TO-220FP package
STF18N65M5	N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
STL4N10F7	N-channel 100 V, 0.062 Ohm typ., 4.5 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL7N10F7	N-channel 100 V, 0.027 Ohm typ., 7 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package

Picture	产品型号	制造商	描述
	STSW-STLUXLIB02	ST	STLUX STNRG devices library source package
	STSW-STLUXSMED02	ST	SMED configuration rev. 2 for STLUX and STNRG family

搜索历史

收藏

精选 产品

技术文档

演示和培训资料

出版刊物和宣传资料

开发工具硬件

软件

eDesignSuite

Amplifiers and Comparators

MEMS and Sensors

电源管理

Power Transistors

精选产品