概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始

持续气道正压通气(CPAP)保持肺泡开放并防止肺泡在呼气阶段完全塌陷,从而帮助患者呼吸。

CPAP系统中最重要的方面是需要调节气流控制,以补偿高度、面罩移动和泄漏,以及加热、加湿、气道呼吸支持等特性。

ST的电机控制集成电路帮助实施非常精确的运动配置文件,减少了声学噪音,提高了患者的舒适性。此外,我们还提供一系列MEMS运动、压力和湿度传感器、高性能STM32微控制器、以及高精度运算放大器和低功耗调节器,帮助开发先进的CPAP呼吸机。

产品型号
描述
STEVAL-SPIN3202 STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board Quick view

Key Features

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

Show More

P-NUCLEO-IHM002 Motor Control Nucleo Pack with NUCLEO-F302R8, X-NUCLEO-IHM07M1 and power supply Quick view

Key Features

  • X-NUCLEO-IHM07M1:
    • Three-phase driver board for BLDC/PMSM motors based on L6230
    • Nominal operating voltage range from 8 V to 48 V DC
    • 2.8 A output peak current (1.4 A RMS)
    • Non-dissipative overcurrent detection and protection
    • Full compatible with ST 6-step or ST-FOC-control algorithm
    • Full support for sensorless and sensor mode
    • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
    • Hall encoder motor sensor connector and circuit
    • Potentiometer available for speed regulation
    • Compatible with STM32 Nucleo boards
    • Equipped with ST morpho connectors
  • NUCLEO-F302R8:
    • STM32F302R8 32-bit Microcontroller based on ARM® Cortex® -M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
    • Two types of extension resources: Arduino UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET
  • Three-phase motor:
    • Bull-Running model BR2804-1700 kV
    • Nominal voltage 11.1 V DC (battery up to 3 S)
    • Maximum DC current: 5 A
    • Seven pole pairs
  • DC power supply:
    • Nominal output voltage: 12 V DC
    • Maximum output current: 2 A
    • Nominal input voltage: 100-240 V AC
    • Nominal frequency: 50/60 Hz

Show More

STEVAL-ISA147V3 500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller Quick view

Key Features

  • Input AC voltage: 90 V to 264 V
  • Input AC frequency: 45 Hz to 65 Hz
  • Nominal power: 500 W
  • Output voltage: 12 V
  • Semi-Bridgeless PFC stage
  • DC-DC stage: resonant LLC with synchronous rectification
  • Peak efficiency: 94%
  • PFC switching frequency: 60 kHz
  • DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above)
  • HF transformer isolation voltage: 4 kV
  • Cooling: natural convection up to 300 W, forced cooling above 300 W
  • PFC control: managed by STM32F051K8
  • LLC control: managed by STM32F334C8
  • Input short-circuit protection
  • Input under/overvoltage protection
  • Input under/overfrequency protection
  • DC Bus under/overvoltage protection
  • Output short-circuit protection
  • Output under/overvoltage protection
  • Overtemperature protection
  • RoHS compliant

Show More

P-NUCLEO-IHM001 Motor Control Nucleo Pack with NUCLEO-F302R8 and X-NUCLEO-IHM07M1 Quick view

Key Features

  • X-NUCLEO-IHM07M1:
    • Three-phase driver board for BLDC/PMSM motors based on L6230
    • Nominal operating voltage range from 8 V to 48 V DC
    • 2.8 A output peak current (1.4 A RMS)
    • Non-dissipative overcurrent detection and protection
    • Full compatible with ST 6-step or ST-FOC-control algorithm
    • Full support for sensorless and sensor mode
    • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
    • Hall encoder motor sensor connector and circuit
    • Potentiometer available for speed regulation
    • Compatible with STM32 Nucleo boards
    • Equipped with ST morpho connectors
  • NUCLEO-F302R8:
    • STM32F302R8 32-bit Microcontroller based on ARM® Cortex® -M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
    • Two types of extension resources: Arduino UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET
  • Three-phase motor:
    • Bull-Running model BR2804-1700 kV
    • Nominal voltage 11.1 V DC (battery up to 3 S)
    • Maximum DC current: 5 A
    • Seven pole pairs
  • DC power supply:
    • Nominal output voltage: 12 V DC
    • Maximum output current: 2 A
    • Nominal input voltage: 100-240 V AC
    • Nominal frequency: 50/60 Hz

Show More

STM32303E-EVAL Evaluation board with STM32F303VE MCU Quick view

Key Features

  • STM32F303VET6 microcontroller
  • Four 5 V power supply options:
    • Power jack
    • ST-LINK/V2 USB connector
    • User USB connector
    • Daughter board
  • I2 S Audio DAC, stereo audio jack which supports headset with microphone
  • 2-GByte (or more) MicroSD card on SPI
  • I2 C compatible serial interface temperature sensor, EEPROM and RF EEPROM
  • RS-232 communication
  • IrDA transceiver
  • JTAG/SWD and ETM trace debug support,
  • ST-LINK/V2 embedded
  • 1-Mbit SPI serial Flash memory
  • 240x320 TFT color LCD connected to the SPI interface
  • Joystick with 4-direction control and selector
  • Reset, Tamper or Key button
  • 4-color user LEDs and high brightness LED
  • Humidity sensor
  • Extension connectors for daughter board or wrapping board
  • MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
  • USB FS connector
  • Touch-sensing buttons
  • RTC with backup battery
  • CAN2.0A/B compliant connection
  • Light-dependent resistor (LDR)
  • IR receiver
  • Potentiometer
  • 2 motor control connectors

Show More

产品型号
STEVAL-SPIN3202

STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board

Key Features

  • Input voltage from 7 V to 45 V
  • Output current up to 15 Arms
  • Power stage based on STD140N6F7 MOSFETs
  • Embedded 3.3 V buck regulator
  • Embedded 12 V LDO regulator
  • Single shunt current sensing
  • Digital Hall sensors and encoder input
  • Overcurrent comparator
  • Bus voltage sensing
  • Fully compatible with STM32 PMSM FOC software development kit
  • 6-step sensorless and sensored firmware supported
  • Embedded ST-LINK/V2-1
  • Easy user interface with buttons and trimmer
  • STM32 FW boot loader supported
  • RoHS compliant

Show More

P-NUCLEO-IHM002

Motor Control Nucleo Pack with NUCLEO-F302R8, X-NUCLEO-IHM07M1 and power supply

Key Features

  • X-NUCLEO-IHM07M1:
    • Three-phase driver board for BLDC/PMSM motors based on L6230
    • Nominal operating voltage range from 8 V to 48 V DC
    • 2.8 A output peak current (1.4 A RMS)
    • Non-dissipative overcurrent detection and protection
    • Full compatible with ST 6-step or ST-FOC-control algorithm
    • Full support for sensorless and sensor mode
    • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
    • Hall encoder motor sensor connector and circuit
    • Potentiometer available for speed regulation
    • Compatible with STM32 Nucleo boards
    • Equipped with ST morpho connectors
  • NUCLEO-F302R8:
    • STM32F302R8 32-bit Microcontroller based on ARM® Cortex® -M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
    • Two types of extension resources: Arduino UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET
  • Three-phase motor:
    • Bull-Running model BR2804-1700 kV
    • Nominal voltage 11.1 V DC (battery up to 3 S)
    • Maximum DC current: 5 A
    • Seven pole pairs
  • DC power supply:
    • Nominal output voltage: 12 V DC
    • Maximum output current: 2 A
    • Nominal input voltage: 100-240 V AC
    • Nominal frequency: 50/60 Hz

Show More

STEVAL-ISA147V3

500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller

Key Features

  • Input AC voltage: 90 V to 264 V
  • Input AC frequency: 45 Hz to 65 Hz
  • Nominal power: 500 W
  • Output voltage: 12 V
  • Semi-Bridgeless PFC stage
  • DC-DC stage: resonant LLC with synchronous rectification
  • Peak efficiency: 94%
  • PFC switching frequency: 60 kHz
  • DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above)
  • HF transformer isolation voltage: 4 kV
  • Cooling: natural convection up to 300 W, forced cooling above 300 W
  • PFC control: managed by STM32F051K8
  • LLC control: managed by STM32F334C8
  • Input short-circuit protection
  • Input under/overvoltage protection
  • Input under/overfrequency protection
  • DC Bus under/overvoltage protection
  • Output short-circuit protection
  • Output under/overvoltage protection
  • Overtemperature protection
  • RoHS compliant

Show More

P-NUCLEO-IHM001

Motor Control Nucleo Pack with NUCLEO-F302R8 and X-NUCLEO-IHM07M1

Key Features

  • X-NUCLEO-IHM07M1:
    • Three-phase driver board for BLDC/PMSM motors based on L6230
    • Nominal operating voltage range from 8 V to 48 V DC
    • 2.8 A output peak current (1.4 A RMS)
    • Non-dissipative overcurrent detection and protection
    • Full compatible with ST 6-step or ST-FOC-control algorithm
    • Full support for sensorless and sensor mode
    • 3-Shunt and 1-Shunt configurable jumpers for motor current sensing
    • Hall encoder motor sensor connector and circuit
    • Potentiometer available for speed regulation
    • Compatible with STM32 Nucleo boards
    • Equipped with ST morpho connectors
  • NUCLEO-F302R8:
    • STM32F302R8 32-bit Microcontroller based on ARM® Cortex® -M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
    • Two types of extension resources: Arduino UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
    • Mbed-enabled (http://mbed.org)
    • On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
    • Two push-buttons: USER and RESET
  • Three-phase motor:
    • Bull-Running model BR2804-1700 kV
    • Nominal voltage 11.1 V DC (battery up to 3 S)
    • Maximum DC current: 5 A
    • Seven pole pairs
  • DC power supply:
    • Nominal output voltage: 12 V DC
    • Maximum output current: 2 A
    • Nominal input voltage: 100-240 V AC
    • Nominal frequency: 50/60 Hz

Show More

STM32303E-EVAL

Evaluation board with STM32F303VE MCU

Key Features

  • STM32F303VET6 microcontroller
  • Four 5 V power supply options:
    • Power jack
    • ST-LINK/V2 USB connector
    • User USB connector
    • Daughter board
  • I2 S Audio DAC, stereo audio jack which supports headset with microphone
  • 2-GByte (or more) MicroSD card on SPI
  • I2 C compatible serial interface temperature sensor, EEPROM and RF EEPROM
  • RS-232 communication
  • IrDA transceiver
  • JTAG/SWD and ETM trace debug support,
  • ST-LINK/V2 embedded
  • 1-Mbit SPI serial Flash memory
  • 240x320 TFT color LCD connected to the SPI interface
  • Joystick with 4-direction control and selector
  • Reset, Tamper or Key button
  • 4-color user LEDs and high brightness LED
  • Humidity sensor
  • Extension connectors for daughter board or wrapping board
  • MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
  • USB FS connector
  • Touch-sensing buttons
  • RTC with backup battery
  • CAN2.0A/B compliant connection
  • Light-dependent resistor (LDR)
  • IR receiver
  • Potentiometer
  • 2 motor control connectors

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4930
      500 W fully digital AC-DC power supply (D-SMPS) evaluation board
      1.0
      8.73 MB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DV-I2C
      2.0
      598.03 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4391
      New P-channel trench technology from ST for low power DC-DC conversions and load switching applications
      1.0
      1.6 MB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN4930

      500 W fully digital AC-DC power supply (D-SMPS) evaluation board

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DV-I2C

      AN2972

      How to design an antenna for dynamic NFC tags

      AN4391

      New P-channel trench technology from ST for low power DC-DC conversions and load switching applications

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

演示和培训资料

    • 描述 版本 文档大小 操作
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF
      ST25TV NFC tags Product Presentation 1.0
      1.6 MB
      PDF
      STM32 Development Boards Portfolio 1.2
      2.98 MB
      PDF
      STM32 PMSM FOC SDK Getting Started 1.6
      5.16 MB
      PDF

      ST25DV-I2C product presentation

      ST25TV NFC tags Product Presentation

      STM32 Development Boards Portfolio

      STM32 PMSM FOC SDK Getting Started

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      400/650 V MDmesh™ DM2: ST’s new MOSFET series with integrated fast-recovery body diode 1.0
      342.97 KB
      PDF
      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator 04.2017
      730.72 KB
      PDF
      Industrial MEMS motion sensors 1.0
      1.36 MB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5 1.1
      265.36 KB
      PDF
      ST25TV series - Tags for Consumer Engagement flyer 1.0
      1.22 MB
      PDF

      400/650 V MDmesh™ DM2: ST’s new MOSFET series with integrated fast-recovery body diode

      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator

      Industrial MEMS motion sensors

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5

      ST25TV series - Tags for Consumer Engagement flyer

    • 描述 版本 文档大小 操作
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

    • 描述 版本 文档大小 操作
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      Operational amplifiers: performance, robust and advanced technology 1.0
      3.71 MB
      PDF
      Semiconductor solutions for healthcare applications 1.0
      665.18 KB
      PDF

      NFC solutions from ST

      Operational amplifiers: performance, robust and advanced technology

      Semiconductor solutions for healthcare applications

    • 描述 版本 文档大小 操作
      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control 1.0
      5.54 MB
      PDF

      STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control

软件

    • 产品型号

      STM32 PMSM FOC Software Development Kit - MC library (UM1052)

      STM32 Motor Control Software Development Kit (MCSDK)

MEMS and Sensors

Part number 描述
HTS221 Capacitive digital sensor for relative humidity and temperature
IIS2DH 3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
IIS2MDC High accuracy, ultra-low-power ,3-axis digital output magnetometer
LPS22HB Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
LPS33HW Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751 2.25 V low-voltage local digital temperature sensor
Part number
Capacitive digital sensor for relative humidity and temperature
3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
High accuracy, ultra-low-power ,3-axis digital output magnetometer
Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package
Analog temperature sensor, ultra-low current 2.4 V, high precision
2.25 V low-voltage local digital temperature sensor

Microcontrollers & Microprocessors

Part number 描述
STM32F302R8 Mainstream Mixed signals MCUs ARM Cortex-M4 core with DSP and FPU, 64 Kbytes Flash, 72 MHz CPU, 12-bit ADC 5 MSPS, Comparator, Op-Amp
Part number
Mainstream Mixed signals MCUs ARM Cortex-M4 core with DSP and FPU, 64 Kbytes Flash, 72 MHz CPU, 12-bit ADC 5 MSPS, Comparator, Op-Amp

Motor Drivers

Part number 描述
STSPIN32F0A Advanced BLDC controller with embedded STM32 MCU
Part number
Advanced BLDC controller with embedded STM32 MCU

Power Transistors

Part number 描述
STL100N8F7 N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL45P3LLH6 P-channel -30 V, 11 mOhm typ., -45 A STripFET H6 Power MOSFET in a PowerFLAT 5x6 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
Part number
N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
P-channel -30 V, 11 mOhm typ., -45 A STripFET H6 Power MOSFET in a PowerFLAT 5x6 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package