透析机

Key features

• STM32F303VET6 microcontroller
• Four 5 V power supply options:
  • Power jack
  • ST-LINK/V2 USB connector
  • User USB connector
  • Daughter board
• I² S Audio DAC, stereo audio jack which supports headset with microphone
• 2-GByte (or more) MicroSD card on SPI
• I² C compatible serial interface temperature sensor, EEPROM and RF EEPROM
• RS-232 communication
• IrDA transceiver
• JTAG/SWD and ETM trace debug support,
• ST-LINK/V2 embedded
• 1-Mbit SPI serial Flash memory
• 240x320 TFT color LCD connected to the SPI interface
• Joystick with 4-direction control and selector
• Reset, Tamper or Key button
• 4-color user LEDs and high brightness LED
• Humidity sensor
• Extension connectors for daughter board or wrapping board
• MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V
• USB FS connector
• Touch-sensing buttons
• RTC with backup battery
• CAN2.0A/B compliant connection
• Light-dependent resistor (LDR)
• IR receiver
• Potentiometer
• 2 motor control connectors

显示较多内容

Key features

• Input voltage: 125 - 400 V_DC
• Nominal power: up to 1200 W
• Nominal current: up to 7 A
• Input auxiliary voltage: up to 20 V DC
• Single- or three- shunt resistors for current sensing (with sensing network)
• Two options for current sensing: dedicated op-amps or through MCU
• Overcurrent hardware protection
• IPM temperature monitoring and protection
• Hall sensor or encoder input
• Uses the STGIB10CH60TS-L IGBT intelligent power module from the 2^nd series of SLLIMM™ IPMs
• Motor control connector (32-pin) to interface with ST MCU boards
• Universal conception for further evaluation with breadboard and testing pins
• Very compact size
• RoHS compliant

显示较多内容

Key features

• Input voltage: 125 - 400 V_DC
• Nominal power: up to 500 W
• Nominal current: up to 3.0 A
• Input auxiliary voltage: up to 20 V DC
• Single or three-shunt resistors for current sensing (with sensing network)
• Two options for current sensing: dedicated op-amps or through MCU
• Overcurrent hardware protection
• IPM temperature monitoring and protection
• Hall sensor or encoder input
• Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2^nd series of SLLIMM™ IPMs
• 32-pin motor control connector for interfacing with ST MCU boards
• Universal conception for further evaluation with breadboard and testing pins
• Very compact size
• RoHS compliant

显示较多内容

Key features

• Single/Dual simultaneous field-oriented control (FOC)
• Motor profiler and One-touch tuning for a fast startup of unknown motors
• Simplified firmware architecture based on the STM32Cube HAL/LL libraries
• Current reading topologies supported:
  • 1 shunt resistor
  • 3 shunt resistors
  • 2 ICS (Isolated Current Sensor)
• Speed/position sensors (Encoder and Hall) as well as sensor-less operation (state observer) supported
• On-the-fly startup for fans
• Speed and torque control
• Motor control algorithms implemented for specific applications, among them MTPA (maximum torque per ampere), Flux weakening, Feed forward and Start-on-the-fly
• Full customization and real time communication through STM32 Motor Control Workbench PC software
  • New project creation starting from the board
  • Workflow supporting the STM32CubeMX GUI configurator
  • Wide range of STM32 microcontrollers supported

显示较多内容