概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

病患监护设备为医务人员提供了一种手段,可以在很长一段时间内连续观察患者的生命体征,例如通过心电图(ECG)观察心脏的电活动。病患监护设备有各种各样的设计,包括医院使用的床旁监护仪和家庭使用的便携式设备。

ST提供齐全的MEMS传感器(包括环境传感器和运动传感器),用于评估患者的体态,姿势。为帮助开发人员设计优化的病患监护系统,我们还提供低功耗的高性能STM32微控制器、高精度运算放大器、以及各种交流-直流(AC-DC)和直流-直流(DC-DC)电源管理和供电集成电路和无线连接解决方案。

    • 产品型号 描述 状态 Core Products Price (US$)*
      Order / Download
      Teseo-LIV3F

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      Tiny GNSS module
      Active
      13.94 立即购买
      EVB-LIV3F

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO LIV3F module evaluation board
      Active
      165.38 立即购买
      TESEO-SUITE

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family
      Active
      -
      软件
      产品型号 Software Version 供货状态 供应商 下载
      TESEO-SUITE 5.2.3 Active ST
      Teseo-LIV3F

      描述 :

      Tiny GNSS module

      Price (US$)*

      13.94

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      EVB-LIV3F

      描述 :

      TESEO LIV3F module evaluation board

      Price (US$)*

      165.38

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO-SUITE

      描述 :

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

      Price (US$)*

      -
      软件

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      产品型号 Software Version 供货状态 供应商 下载
      TESEO-SUITE 5.2.3 Active ST

产品型号
描述
32L496GDISCOVERY Discovery kit with STM32L496AG MCU Quick view

主要特性

  • STM32L496AGI6 microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in an UFBGA169 package
  • 1.54 inch 240 x 240 pixel-TFT color LCD with parallel interface
  • SAI Audio CODEC, with a stereo headset jack, including analog microphone input
  • Stereo digital MEMS microphones
  • microSD™ card connector (card included)
  • Camera 8 bit-connector
  • STMod+ and PMOD connectors
  • 8 Mbit-PSRAM
  • IDD measurement
  • 64 Mbit-Quad-SPI Flash
  • 8 LEDs
  • Reset push button
  • 4 direction-joystick with selection
  • USB OTG FS with Micro-AB connector
  • Compatible Arduino™ Uno V3 connectors
  • On-board ST-LINK/V2-1 debugger
  • USB ST-LINK functions: Virtual COM port, mass storage, debug port
  • 5 source options for power supply
    • ST-LINK/V2-1 USB connector
    • User USB FS connector
    • VIN from Arduino™ connector
    • 5 V from Arduino™ connector
    • USB charger
  • 2 possible supply voltages for the MCU: 1.8 V and 3.3 V
  • Comprehensive free software including a variety of examples, part of the STM32Cube package

Show More

32L4R9IDISCOVERY Discovery kit with STM32L4R9AI MCU Quick view

主要特性

  • STM32L4R9AII6 microcontroller with 2-Mbyte Flash memory and 640-Kbyte RAM in UFBGA169 package
  • 1.2” 390x390 pixel AMOLED round display panel with 16-million colors depth, MIPI® DSI interface, and capacitive touch panel
  • USB OTG FS
  • On-board current measurement
  • SAI audio codec
  • ST-MEMS digital microphones
  • 16-Mbit asynchronous PSRAM
  • 512-Mbit Octo-SPI Flash
  • 2 user LEDs
  • 1 reset push-button
  • 4-direction joystick with selection button
  • Board connectors:
    • 8-bit camera
    • USB OTG FS with Micro-AB
    • Stereo headset jack including analog microphone input
    • microSD™ card
  • Board expansion connectors:
    • Arduino™ Uno V3
    • STMod+
    • PMOD
    • EXT_I2C
  • Flexible power-supply options:
    • ST-LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USBre-enumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package
  • Support of a wide choice of integrated development environments (IDEs), including IAR™, Keil® and GCC-based IDEs

Show More

B-L475E-IOT01A STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi Quick view

主要特性

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

产品型号
32L496GDISCOVERY

Discovery kit with STM32L496AG MCU

主要特性

  • STM32L496AGI6 microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in an UFBGA169 package
  • 1.54 inch 240 x 240 pixel-TFT color LCD with parallel interface
  • SAI Audio CODEC, with a stereo headset jack, including analog microphone input
  • Stereo digital MEMS microphones
  • microSD™ card connector (card included)
  • Camera 8 bit-connector
  • STMod+ and PMOD connectors
  • 8 Mbit-PSRAM
  • IDD measurement
  • 64 Mbit-Quad-SPI Flash
  • 8 LEDs
  • Reset push button
  • 4 direction-joystick with selection
  • USB OTG FS with Micro-AB connector
  • Compatible Arduino™ Uno V3 connectors
  • On-board ST-LINK/V2-1 debugger
  • USB ST-LINK functions: Virtual COM port, mass storage, debug port
  • 5 source options for power supply
    • ST-LINK/V2-1 USB connector
    • User USB FS connector
    • VIN from Arduino™ connector
    • 5 V from Arduino™ connector
    • USB charger
  • 2 possible supply voltages for the MCU: 1.8 V and 3.3 V
  • Comprehensive free software including a variety of examples, part of the STM32Cube package

Show More

32L4R9IDISCOVERY

Discovery kit with STM32L4R9AI MCU

主要特性

  • STM32L4R9AII6 microcontroller with 2-Mbyte Flash memory and 640-Kbyte RAM in UFBGA169 package
  • 1.2” 390x390 pixel AMOLED round display panel with 16-million colors depth, MIPI® DSI interface, and capacitive touch panel
  • USB OTG FS
  • On-board current measurement
  • SAI audio codec
  • ST-MEMS digital microphones
  • 16-Mbit asynchronous PSRAM
  • 512-Mbit Octo-SPI Flash
  • 2 user LEDs
  • 1 reset push-button
  • 4-direction joystick with selection button
  • Board connectors:
    • 8-bit camera
    • USB OTG FS with Micro-AB
    • Stereo headset jack including analog microphone input
    • microSD™ card
  • Board expansion connectors:
    • Arduino™ Uno V3
    • STMod+
    • PMOD
    • EXT_I2C
  • Flexible power-supply options:
    • ST-LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USBre-enumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package
  • Support of a wide choice of integrated development environments (IDEs), including IAR™, Keil® and GCC-based IDEs

Show More

B-L475E-IOT01A

STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

主要特性

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN2972

      How to design an antenna for dynamic NFC tags

演示和培训资料

    • 描述 版本 文档大小 操作
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF
      STM32 Development Boards Portfolio 1.0
      3.08 MB
      PDF

      ST25DV-I2C product presentation

      STM32 Development Boards Portfolio

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5 1.1
      265.36 KB
      PDF

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      ST25DV系列动态NFC/RFID标签 ISO/IEC 15693 NFC Forum Type 5

    • 描述 版本 文档大小 操作
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

    • 描述 版本 文档大小 操作
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 18.11
      3.86 MB
      PDF
      Semiconductor solutions for healthcare applications 1.0
      665.18 KB
      PDF

      NFC solutions from ST

      STM32L series - Ultra-low-power 32-bit MCUs

      Semiconductor solutions for healthcare applications

MEMS and Sensors

产品型号 描述
STTS751 2.25 V low-voltage local digital temperature sensor
产品型号
2.25 V low-voltage local digital temperature sensor

Microcontrollers & Microprocessors

产品型号 描述
STM32L496AG Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, USB OTG, LCD, DFSDM
产品型号
Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, USB OTG, LCD, DFSDM