概述
解决方案
硬件评估工具
资源
工具和软件
主要产品
开始

超声成像的原理是利用探针将声波(非可听频谱)直接应用到患者的皮肤上,并分析在遇到不同组织和器官时回声所需返回时间和产生的振幅。

这种无损技术能够创建实时图像,可以方便地用于特定情况,如超声心动图和胎儿诊断。

影响重构图像质量的关键是探针(通常使用压电式换能器)可以同时处理的像素数量,这还包括对这些波形进行时间和空间聚焦(或波束形成)的能力。

ST提供了最先进的集成式多通道高压传输脉冲发生器,用来激励压电式换能器,帮助实现精确的波束形成。

此外,我们还提供高性能STM32微控制器、功率分立器件(包括二极管和功率MOSFET)、AC-DC和DC-DC电源管理IC、以及有线和无线通信解决方案(包括蓝牙连接),以帮助构建创新型超声成像设备。

产品型号
描述
STEVAL-IME013V1 Cost effective ultrasound pulser IC evaluation board based on the STHV800 Quick view

主要特性

  • 8-channel outputs: high voltage and low voltage BNC connectors
  • Up to 4 memory locations to store user-designed waveforms
  • USB connector to download stored waveforms
  • Dedicated connectors to supply high voltage and low voltage to the STHV800 output stage
  • 4 key button to quickly select the preferred program
  • RoHS compliant

Show More

STEVAL-IME009V1 STHV800 Ultrasound Pulser IC evaluation board Quick view

主要特性

  • 8-channel outputs: high voltage and low voltage BNC connectors
  • Load simulator using signal equivalent circuits
  • Possibility to set up own load simulator
  • 16 preset waveforms
  • USB connector to connect STM32 with PC and supply power to it
  • 4 MB serial Flash memory to host FPGA code and waveforms
  • Memory expansion connector to add external serial Flash
  • Connectors to supply high voltage and low voltage to the STHV800 output stage
  • LEDs to monitor the power management stage
  • Human machine interface to select, start and stop the generation of the preset waveforms
  • 25 LEDs to monitor board behavior
  • RoHS compliant

Show More

STEVAL-IME003V1 STHV748 Ultrasound Pulser IC evaluation board Quick view

主要特性

  • 4-channel outputs: high voltage and low voltage BNC connectors
  • Load simulator using signal equivalent circuits
  • Possibility to set up own load simulator
  • 16 preset waveforms
  • USB connector to connect STM32 with PC and supply power to it
  • 4 MB serial Flash memory to host FPGA code and waveforms
  • Memory expansion connector to add external serial Flash
  • Connectors to supply high voltage and low voltage to the STHV748 output stage
  • LEDs to monitor the power management stage
  • Human machine interface to select, start and stop the generation of the preset waveforms
  • 25 LEDs to monitor board behavior
  • RoHS compliant

Show More

NUCLEO-F756ZG STM32 Nucleo-144 development board with STM32F756ZG MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-IME014V1B 16-channel high voltage pulser evaluation kit for ultrasound imaging applications Quick view

主要特性

  • Kit consists of three connected modules
  • Pulser module (STEVAL-IME014V1):
    • 16-channel high voltage outputs
    • typical load connected on high voltage outputs (100 Ω / 300 pF); can be easily removed
    • 16-channel low voltage outputs
    • no load on low voltage outputs
    • four preset programs and waveforms
    • USB interface to change programs and waveforms
    • button interface to control waveform generation
    • status LEDs
  • Power supply module (STEVAL-IME014V1D):
    • four high voltage and one low voltage supply lines
    • all other necessary low voltage supplies generated on-board
  • STM32 Nucleo microcontroller module:
    • STM32 microcontroller
  • GUI to configure the kit
  • Kits can be chained in master/slave mode

Show More

STM32H743I-EVAL Evaluation board with STM32H743XI MCU Quick view

主要特性

  • Common features
    • STM32H743XIH6 and STM32H753XIH6 Arm® Cortex® microcontrollers with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package
    • 5.7” 640×480 TFT color LCD with touchscreen
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG_HS and OTG_FS
    • I2 C compatible serial interface
    • RTC with rechargeable backup battery
    • SAI audio DAC
    • ST-MEMS digital microphones
    • 8-Gbyte (or more) SDIO3.0 interface microSD™ card
    • 8 M×32bit SDRAM, 1 M×16bit SRAM and 8 M×16bit NOR Flash memory
    • 1-Gbit Twin Quad-SPI NOR Flash memory or two 512-Mbit Quad-SPI NOR Flash memories
    • Potentiometer
    • 4 color user LEDs
    • Reset, wakeup, tamper or key buttons
    • Joystick with 4-direction control and selector
    • Board connectors:Power jack3 USB interfaces with Micro-AB connectorRS-232 communicationsEthernet RJ45FDCAN compliant connectionStereo headset jack including analog microphone input2 audio jacks for external speakersmicroSD™ cardJTAG/SWD and ETM traceExtension connectors and memory connectors for daughterboard or wire-wrap board
    • Flexible power-supply options: ST-LINK USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® , GCC-based IDEs
  • Board-specific feature
    • ST-LINK/V2-1 or STLINK-V3E version of the ST-LINK

Show More

NUCLEO-F722ZE STM32 Nucleo-144 development board with STM32F722ZE MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

NUCLEO-F767ZI STM32 Nucleo-144 development board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

NUCLEO-F746ZG STM32 Nucleo-144 development board with STM32F746ZG MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-ISA147V3 500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller Quick view

主要特性

  • Input AC voltage: 90 V to 264 V
  • Input AC frequency: 45 Hz to 65 Hz
  • Nominal power: 500 W
  • Output voltage: 12 V
  • Semi-Bridgeless PFC stage
  • DC-DC stage: resonant LLC with synchronous rectification
  • Peak efficiency: 94%
  • PFC switching frequency: 60 kHz
  • DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above)
  • HF transformer isolation voltage: 4 kV
  • Cooling: natural convection up to 300 W, forced cooling above 300 W
  • PFC control: managed by STM32F051K8
  • LLC control: managed by STM32F334C8
  • Input short-circuit protection
  • Input under/overvoltage protection
  • Input under/overfrequency protection
  • DC Bus under/overvoltage protection
  • Output short-circuit protection
  • Output under/overvoltage protection
  • Overtemperature protection
  • RoHS compliant

Show More

STEVAL-IME011V2 Evaluation board based on the STHV748S high voltage pulser Quick view

主要特性

  • 4-channel outputs: high voltage and low voltage BNC connectors
  • Up to 4 memory locations to store own designed waveforms
  • USB connector to download on the board own waveforms
  • Dedicated connectors to supply high voltage and low voltage to the STHV748 output stage
  • 4 key button to select quickly the preferred program
  • RoHS compliant

Show More

产品型号
STEVAL-IME013V1

Cost effective ultrasound pulser IC evaluation board based on the STHV800

主要特性

  • 8-channel outputs: high voltage and low voltage BNC connectors
  • Up to 4 memory locations to store user-designed waveforms
  • USB connector to download stored waveforms
  • Dedicated connectors to supply high voltage and low voltage to the STHV800 output stage
  • 4 key button to quickly select the preferred program
  • RoHS compliant

Show More

STEVAL-IME009V1

STHV800 Ultrasound Pulser IC evaluation board

主要特性

  • 8-channel outputs: high voltage and low voltage BNC connectors
  • Load simulator using signal equivalent circuits
  • Possibility to set up own load simulator
  • 16 preset waveforms
  • USB connector to connect STM32 with PC and supply power to it
  • 4 MB serial Flash memory to host FPGA code and waveforms
  • Memory expansion connector to add external serial Flash
  • Connectors to supply high voltage and low voltage to the STHV800 output stage
  • LEDs to monitor the power management stage
  • Human machine interface to select, start and stop the generation of the preset waveforms
  • 25 LEDs to monitor board behavior
  • RoHS compliant

Show More

STEVAL-IME003V1

STHV748 Ultrasound Pulser IC evaluation board

主要特性

  • 4-channel outputs: high voltage and low voltage BNC connectors
  • Load simulator using signal equivalent circuits
  • Possibility to set up own load simulator
  • 16 preset waveforms
  • USB connector to connect STM32 with PC and supply power to it
  • 4 MB serial Flash memory to host FPGA code and waveforms
  • Memory expansion connector to add external serial Flash
  • Connectors to supply high voltage and low voltage to the STHV748 output stage
  • LEDs to monitor the power management stage
  • Human machine interface to select, start and stop the generation of the preset waveforms
  • 25 LEDs to monitor board behavior
  • RoHS compliant

Show More

NUCLEO-F756ZG

STM32 Nucleo-144 development board with STM32F756ZG MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-IME014V1B

16-channel high voltage pulser evaluation kit for ultrasound imaging applications

主要特性

  • Kit consists of three connected modules
  • Pulser module (STEVAL-IME014V1):
    • 16-channel high voltage outputs
    • typical load connected on high voltage outputs (100 Ω / 300 pF); can be easily removed
    • 16-channel low voltage outputs
    • no load on low voltage outputs
    • four preset programs and waveforms
    • USB interface to change programs and waveforms
    • button interface to control waveform generation
    • status LEDs
  • Power supply module (STEVAL-IME014V1D):
    • four high voltage and one low voltage supply lines
    • all other necessary low voltage supplies generated on-board
  • STM32 Nucleo microcontroller module:
    • STM32 microcontroller
  • GUI to configure the kit
  • Kits can be chained in master/slave mode

Show More

STM32H743I-EVAL

Evaluation board with STM32H743XI MCU

主要特性

  • Common features
    • STM32H743XIH6 and STM32H753XIH6 Arm® Cortex® microcontrollers with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package
    • 5.7” 640×480 TFT color LCD with touchscreen
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG_HS and OTG_FS
    • I2 C compatible serial interface
    • RTC with rechargeable backup battery
    • SAI audio DAC
    • ST-MEMS digital microphones
    • 8-Gbyte (or more) SDIO3.0 interface microSD™ card
    • 8 M×32bit SDRAM, 1 M×16bit SRAM and 8 M×16bit NOR Flash memory
    • 1-Gbit Twin Quad-SPI NOR Flash memory or two 512-Mbit Quad-SPI NOR Flash memories
    • Potentiometer
    • 4 color user LEDs
    • Reset, wakeup, tamper or key buttons
    • Joystick with 4-direction control and selector
    • Board connectors:Power jack3 USB interfaces with Micro-AB connectorRS-232 communicationsEthernet RJ45FDCAN compliant connectionStereo headset jack including analog microphone input2 audio jacks for external speakersmicroSD™ cardJTAG/SWD and ETM traceExtension connectors and memory connectors for daughterboard or wire-wrap board
    • Flexible power-supply options: ST-LINK USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® , GCC-based IDEs
  • Board-specific feature
    • ST-LINK/V2-1 or STLINK-V3E version of the ST-LINK

Show More

NUCLEO-F722ZE

STM32 Nucleo-144 development board with STM32F722ZE MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

NUCLEO-F767ZI

STM32 Nucleo-144 development board with STM32F767ZI MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

NUCLEO-F746ZG

STM32 Nucleo-144 development board with STM32F746ZG MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-ISA147V3

500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller

主要特性

  • Input AC voltage: 90 V to 264 V
  • Input AC frequency: 45 Hz to 65 Hz
  • Nominal power: 500 W
  • Output voltage: 12 V
  • Semi-Bridgeless PFC stage
  • DC-DC stage: resonant LLC with synchronous rectification
  • Peak efficiency: 94%
  • PFC switching frequency: 60 kHz
  • DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above)
  • HF transformer isolation voltage: 4 kV
  • Cooling: natural convection up to 300 W, forced cooling above 300 W
  • PFC control: managed by STM32F051K8
  • LLC control: managed by STM32F334C8
  • Input short-circuit protection
  • Input under/overvoltage protection
  • Input under/overfrequency protection
  • DC Bus under/overvoltage protection
  • Output short-circuit protection
  • Output under/overvoltage protection
  • Overtemperature protection
  • RoHS compliant

Show More

STEVAL-IME011V2

Evaluation board based on the STHV748S high voltage pulser

主要特性

  • 4-channel outputs: high voltage and low voltage BNC connectors
  • Up to 4 memory locations to store own designed waveforms
  • USB connector to download on the board own waveforms
  • Dedicated connectors to supply high voltage and low voltage to the STHV748 output stage
  • 4 key button to select quickly the preferred program
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4930
      500 W fully digital AC-DC power supply (D-SMPS) evaluation board
      1.0
      8.73 MB
      PDF
      AN4391
      New P-channel trench technology from ST for low power DC-DC conversions and load switching applications
      1.0
      1.6 MB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN4930

      500 W fully digital AC-DC power supply (D-SMPS) evaluation board

      AN4391

      New P-channel trench technology from ST for low power DC-DC conversions and load switching applications

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      400/650 V MDmesh™ DM2: ST’s new MOSFET series with integrated fast-recovery body diode 1.0
      342.97 KB
      PDF
      600-650 V MDmesh™ M2: The ST’s new Super-junction HV MOSFET series 1.0
      755.53 KB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      Octal ultrasound pulser High-voltage, high-speed STHV800
      276.81 KB
      PDF
      STSAFE-A Optimized Secure Solution for authentication in IoT 1.0
      231.65 KB
      PDF

      400/650 V MDmesh™ DM2: ST’s new MOSFET series with integrated fast-recovery body diode

      600-650 V MDmesh™ M2: The ST’s new Super-junction HV MOSFET series

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      Octal ultrasound pulser High-voltage, high-speed STHV800

      STSAFE-A Optimized Secure Solution for authentication in IoT

    • 描述 版本 文档大小 操作
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

    • 描述 版本 文档大小 操作
      Semiconductor solutions for healthcare applications 1.0
      665.18 KB
      PDF

      Semiconductor solutions for healthcare applications

MEMS and Sensors

产品型号 描述
H3LIS331DL Low power High-g 3-axis accelerometer, SPI/I2C digital output MEMS motion sensor, user-selectable full scales of ±100g/±200g/±400g
IIS2DH 3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
IIS2MDC High accuracy, ultra-low-power ,3-axis digital output magnetometer
IIS3DHHC High-resolution, high-stability 3-axis digital inclinometer for industrial applications
ISM330DLC iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications
STTS751 2.25 V low-voltage local digital temperature sensor
产品型号
Low power High-g 3-axis accelerometer, SPI/I2C digital output MEMS motion sensor, user-selectable full scales of ±100g/±200g/±400g
3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
High accuracy, ultra-low-power ,3-axis digital output magnetometer
High-resolution, high-stability 3-axis digital inclinometer for industrial applications
iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications
2.25 V low-voltage local digital temperature sensor

Power Transistors

产品型号 描述
STL100N8F7 N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL150N3LLH6 N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL45P3LLH6 P-channel -30 V, 11 mOhm typ., -45 A STripFET H6 Power MOSFET in a PowerFLAT 5x6 package
STL50N6F7 N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
产品型号
N-channel 80 V, 5.2 mOhm typ., 100 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 30 V, 0.0016 Ohm typ., 33 A STripFET(TM) VI DeepGATE(TM) Power MOSFET in PowerFLAT(TM) 5x6 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
P-channel -30 V, 11 mOhm typ., -45 A STripFET H6 Power MOSFET in a PowerFLAT 5x6 package
N-channel 60 V, 9 mOhm typ., 60 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package

Switches and Multiplexers

产品型号 描述
STHV1600 16 channels ±100 V, ±2/4 A, 5/3-level RTZ, high-speed ultrasound pulser with integrated transmit beamformer
STHV748S Quad +/- 90 V, +/- 2 A, 3/5 level, ESD-enhanced high-speed ultrasound pulser
STHV800 Octal ±90 V, ±2 A, 3-level RTZ, high-speed ultrasound pulser
产品型号
16 channels ±100 V, ±2/4 A, 5/3-level RTZ, high-speed ultrasound pulser with integrated transmit beamformer
Quad +/- 90 V, +/- 2 A, 3/5 level, ESD-enhanced high-speed ultrasound pulser
Octal ±90 V, ±2 A, 3-level RTZ, high-speed ultrasound pulser