概观
解决方案
HW Evaluation Tools
资源
工具和软件
Key Products
开始

销售点的一个明显趋势是用执行POS移动应用程序的平板电脑和智能手机取代传统的ePOS设备,并提供所需的后端和到移动POS终端(mPOS)的连接。mPOS甚至可以提供LTE连接,让它们既可以是移动支付设备,也可以是独立设备。这些终端运行EMVCo Level 1和2接触式和非接触式软件协议栈,以及符合支付卡行业合规要求的篡改检测和加密功能。

我们的ST25R NFC读取器提供高灵敏度和天线适应性,可显著减少认证工作,从而缩短上市时间。我们还提供蓝牙低功耗连接和符合Qi标准的无线充电解决方案。

型号
描述
NUCLEO-F429ZI STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IHM13A1 Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250 Quick view

主要特性

  • Low voltage range from 1.8 V to 10 V
  • Current up to 2.6 A r.m.s.
  • Current control with adjustable off-time
  • Full overcurrent and short circuit protection
  • Thermal shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-OET004V1 USB Type-C protection and filtering demo PCB Quick view

主要特性

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT Quick view

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC05A1 NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos Quick view

主要特性

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1 Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33 Quick view

主要特性

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-POE002V1 5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design Quick view

主要特性

  • PM8805 4-pair IEEE 802.3bt compliant PD interface
  • Works with power supplied from Ethernet LAN cables or local auxiliary sources
  • Line input voltage range: 40 to 60 VDC
  • Output stage managed by configurable PM8804 controller
  • Output voltage: 5 VDC ±2.5%
  • Output current: 8 A
  • Peak-to-peak output ripple: <50 mV
  • DC-DC full load efficiency: >91%
  • Overall full load efficiency: >90%
  • Transient response ΔV pk-pk 100% to 50% load step ≈ 700 mV
  • Switching frequency ≈ 280 KHz

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-EMVCO EMVCo reference design for the ST25R3911B high performance HF reader Quick view

主要特性

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

Show More

IMAGE

Image
Image
STEVAL-ISB044V1 Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP Quick view

主要特性

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-POE003V1 5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design Quick view

主要特性

  • Features of PM8805 PoE-PD interface
    • System in package integrating a double active bridge, hot-swap MOSFET and PoE-PD interface
    • PoE-PD single-signature interface compliant with IEEE 802.3bt
    • Detection and support of high power 4-pair applications
    • 100 V N-Ch MOSFETs with 0.2 Ω total path resistance for each active bridge
    • Identifies which kind of PSE (standard or legacy) it is connected to and provides successful IEEE802.3.af/at/bt classification indication through a combination of the T0, T1 and T2 signals (open drain)
    • VFQFPN43 8x8 mm with 6 exposed pads
  • Features of PM8804 PWM controller
    • PWM peak current mode controller
    • Input operating voltage up to 75 V
    • Internal high voltage start up regulator with 20 mA capability
    • Programmable fixed frequency up to 1 MHz
    • Soft start up with settable time
    • Soft turn off (optionally disabled)
    • Dual 1Apk, low side complementary gate drivers
    • GATE2 optionally turned off for reduced consumption
    • 80% maximum duty cycle with internal slope compensation
    • VFQFPN 3.0x3.0x1.0 16L 0.5 mm pitch
  • WEEE compliant
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-F439ZI STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB045V1 2.5 W wireless charger transmitter evaluation kit Quick view

主要特性

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
型号
NUCLEO-F429ZI

STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IHM13A1

Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250

主要特性

  • Low voltage range from 1.8 V to 10 V
  • Current up to 2.6 A r.m.s.
  • Current control with adjustable off-time
  • Full overcurrent and short circuit protection
  • Thermal shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-OET004V1

USB Type-C protection and filtering demo PCB

主要特性

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC05A1

NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos

主要特性

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

主要特性

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-POE002V1

5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design

主要特性

  • PM8805 4-pair IEEE 802.3bt compliant PD interface
  • Works with power supplied from Ethernet LAN cables or local auxiliary sources
  • Line input voltage range: 40 to 60 VDC
  • Output stage managed by configurable PM8804 controller
  • Output voltage: 5 VDC ±2.5%
  • Output current: 8 A
  • Peak-to-peak output ripple: <50 mV
  • DC-DC full load efficiency: >91%
  • Overall full load efficiency: >90%
  • Transient response ΔV pk-pk 100% to 50% load step ≈ 700 mV
  • Switching frequency ≈ 280 KHz

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-EMVCO

EMVCo reference design for the ST25R3911B high performance HF reader

主要特性

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

Show More

IMAGE

Image
Image
STEVAL-ISB044V1

Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP

主要特性

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-POE003V1

5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design

主要特性

  • Features of PM8805 PoE-PD interface
    • System in package integrating a double active bridge, hot-swap MOSFET and PoE-PD interface
    • PoE-PD single-signature interface compliant with IEEE 802.3bt
    • Detection and support of high power 4-pair applications
    • 100 V N-Ch MOSFETs with 0.2 Ω total path resistance for each active bridge
    • Identifies which kind of PSE (standard or legacy) it is connected to and provides successful IEEE802.3.af/at/bt classification indication through a combination of the T0, T1 and T2 signals (open drain)
    • VFQFPN43 8x8 mm with 6 exposed pads
  • Features of PM8804 PWM controller
    • PWM peak current mode controller
    • Input operating voltage up to 75 V
    • Internal high voltage start up regulator with 20 mA capability
    • Programmable fixed frequency up to 1 MHz
    • Soft start up with settable time
    • Soft turn off (optionally disabled)
    • Dual 1Apk, low side complementary gate drivers
    • GATE2 optionally turned off for reduced consumption
    • 80% maximum duty cycle with internal slope compensation
    • VFQFPN 3.0x3.0x1.0 16L 0.5 mm pitch
  • WEEE compliant
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-F439ZI

STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB045V1

2.5 W wireless charger transmitter evaluation kit

主要特性

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

技术文档

    • 描述 版本 文档大小 Action
      AN4974
      Antenna matching for ST25R3911B/ST25R391x devices
      2.0
      3 MB
      PDF
      AN4914
      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices
      2.0
      1.9 MB
      PDF
      AN4900
      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications
      4.0
      1.1 MB
      PDF
      AN5043
      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices
      4.0
      873.78 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN4871
      USB Type-C protection and filtering
      2.1
      2.42 MB
      PDF
      AN4974

      Antenna matching for ST25R3911B/ST25R391x devices

      AN4914

      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices

      AN4900

      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications

      AN5043

      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices

      AN576

      PCB layout optimisation

      AN316

      Transil™ clamping protection mode

      AN4871

      USB Type-C protection and filtering

演示和培训资料

    • 描述 版本 文档大小 Action
      ST253911B-15 Product Presentation 1.0
      3.4 MB
      PDF

      ST253911B-15 Product Presentation

出版刊物和宣传资料

    • 描述 版本 文档大小 Action
      High performance NFC/RFID readers 1.0
      975.29 KB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      519.6 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      STM32 GUI solutions - Advanced HMI now achievable on embedded systems 17.12
      1.25 MB
      PDF
      STM32L4 Series - Ultra-low-power and performance 18.10
      437.71 KB
      PDF
      STM32L4+ Series - Ultra-low-power and more performance 18.05
      492.01 KB
      PDF
      STM32L5 Series - Excellence in ultra-low-power with more security 18.10
      240.29 KB
      PDF
      Secure Wearables - all-on-one ST53G Secure Module 1.0
      1,006.28 KB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      527.9 KB
      PDF

      High performance NFC/RFID readers

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      STM32 GUI solutions - Advanced HMI now achievable on embedded systems

      STM32L4 Series - Ultra-low-power and performance

      STM32L4+ Series - Ultra-low-power and more performance

      STM32L5 Series - Excellence in ultra-low-power with more security

      Secure Wearables - all-on-one ST53G Secure Module

      Ultra-low clamping voltage 0201 ESD diodes

    • 描述 版本 文档大小 Action
      Motor Control Reference Guide 15.10
      7.15 MB
      PDF
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 18.11
      3.86 MB
      PDF

      Motor Control Reference Guide

      NFC solutions from ST

      STM32L series - Ultra-low-power 32-bit MCUs

设计工具

    • 型号

      Transient voltage suppressor smart selection tool

开发工具硬件

软件

    • 型号

      Bluetooth Low Energy software expansion for STM32Cube

    • 型号

      Sources of STM32L4 based firmware for ST25R3911B-DISCO

      Antenna Matching Tool for ST25R NFC/HF reader family

EMI Filtering and Signal Conditioning

型号 描述
EMIF03-SIM02M8 3-line EMI filter and ESD protection for SIM card interfaces
EMIF06-MSD02N16 6-line EMI filter and ESD protection for T-Flash and micro SD card™ interfaces
EMIF08-LCD04M16 8-line L-C EMI filter and ESD protection for display interfaces
MLPF-WB55-01E3 2.4 GHz low-pass filter matched to STM32WB55
型号
3-line EMI filter and ESD protection for SIM card interfaces
6-line EMI filter and ESD protection for T-Flash and micro SD card™ interfaces
8-line L-C EMI filter and ESD protection for display interfaces
2.4 GHz low-pass filter matched to STM32WB55

Interfaces and Transceivers

型号 描述
ST8024L Smart card interface
型号
Smart card interface

NFC

型号 描述
ST25R3911B NFC / HF RFID Reader IC
ST25R3912 NFC / HF RFID Reader IC
型号
NFC / HF RFID Reader IC
NFC / HF RFID Reader IC

Protection Devices

型号 描述
ESDA6V1-5SC6 Transil™ (TVS) array for ESD protection
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
ESDAXLC18-1BF4 Ultra Low Capacitance Single Line Bidirectional ESD Protection
ESDZV5-1BF4 Ultra Low clamping single line bidirectional ESD protection
HSP053-4M5 4-line ESD protection for high-speed lines
USBLC6-2 ESD Protection for USB 2.0 High Speed
USBLC6-2SC6Y Automotive very low capacitance ESD protection
型号
Transil™ (TVS) array for ESD protection
High-power transient voltage supressor (TVS)
Ultra Low Capacitance Single Line Bidirectional ESD Protection
Ultra Low clamping single line bidirectional ESD protection
4-line ESD protection for high-speed lines
ESD Protection for USB 2.0 High Speed
Automotive very low capacitance ESD protection