概观
解决方案
HW Evaluation Tools
资源
工具和软件
Key Products
开始

NFC HF读写器用于短距离通信,其中一端的设备 — NFC标签 — 是完全被动的。这些读写器基于国际标准:ISO/IEC 14443适用于距离标签不超过10厘米的短距离通信,ISO/IEC 15693支持与1 - 2米距离内的NFC Forum Type 5标签通信。

ST是RFID和NFC技术的先驱之一,积极参与NFC论坛事务,将NFC-V技术推向市场。

ST25R39 NFC发起设备/HF读写器集成电路具有卓越的射频稳定性和灵敏度性能,而有源天线调谐电路可以确保极佳的能效,是便携式电池供电设备的关键特性。

型号
Description
NUCLEO-F429ZI STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT Quick view

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC05A1 NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos Quick view

主要特性

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-F439ZI STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
型号
NUCLEO-F429ZI

STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

主要特性

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC05A1

NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos

主要特性

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
NUCLEO-F439ZI

STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity

主要特性

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

演示和培训资料

    • Description 版本 文档大小 Action
      ST25R3911B-15 product presentation 1.0
      3.4 MB
      PDF

      ST25R3911B-15 product presentation

出版刊物和宣传资料

    • Description 版本 文档大小 Action
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      519.6 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      STM32L4 Series - Ultra-low-power and performance 18.10
      437.71 KB
      PDF
      STM32L4+ Series - Ultra-low-power and more performance 18.05
      492.01 KB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      527.9 KB
      PDF

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      STM32L4 Series - Ultra-low-power and performance

      STM32L4+ Series - Ultra-low-power and more performance

      Ultra-low clamping voltage 0201 ESD diodes

    • Description 版本 文档大小 Action
      NFC solutions from ST 1.0
      5.1 MB
      PDF

      NFC solutions from ST

设计工具

    • 型号

      Transient voltage suppressor smart selection tool

开发工具硬件

软件

    • 型号

      High performance HF reader/NFC initiator IC software expansion for STM32Cube

    • 型号

      PC software installer for ST25R3911B-DISCO

      Sources of STM32L4 based firmware for ST25R3911B-DISCO

      Antenna Matching Tool for ST25R NFC/HF reader family

      Sources of STM8 firmware for X-NUCLEO-NFC05A1 NFC/RFID HF reader expansion board

NFC

Part number Description
ST25R3911B NFC / HF RFID Reader IC
ST25R3912 NFC / HF RFID Reader IC
Part number
NFC / HF RFID Reader IC
NFC / HF RFID Reader IC

Protection Devices

Part number Description
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
Part number
High-power transient voltage supressor (TVS)