概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始

支付电子狗是最基本的mPOS设备,通常通过音频插孔或BLE连接到也提供密码键盘的移动设备。mPOS电子狗在系统中的单一微控制器上运行EMVCo Level 1和2接触式和非接触式软件协议栈,以及PCI标准要求的基本篡改检测和加密功能.

我们的ST25R NFC读取器具备较高的灵敏度并促进天线适应性,可显著减少认证工作,从而有助于缩短上市时间。我们还提供蓝牙低功耗连接和符合Qi标准的无线充电解决方案。

产品型号
描述
ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT Quick view

Key Features

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

ST25R3911B-EMVCO EMVCo reference design for the ST25R3911B high performance HF reader Quick view

Key Features

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

Show More

图片

Image
Image
NUCLEO-F439ZI STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

Key Features

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including ARDUINO® Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-ISB045V1 2.5 W wireless charger transmitter evaluation kit Quick view

Key Features

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

Show More

NUCLEO-F429ZI STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

Key Features

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including ARDUINO® Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-OET004V1 USB Type-C protection and filtering demo PCB Quick view

Key Features

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

Show More

X-NUCLEO-NFC05A1 NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos Quick view

Key Features

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

产品型号
ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

Key Features

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

Show More

ST25R3911B-EMVCO

EMVCo reference design for the ST25R3911B high performance HF reader

Key Features

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

Show More

图片

Image
Image
NUCLEO-F439ZI

STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity

Key Features

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including ARDUINO® Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-ISB045V1

2.5 W wireless charger transmitter evaluation kit

Key Features

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

Show More

NUCLEO-F429ZI

STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

Key Features

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including ARDUINO® Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

Show More

STEVAL-OET004V1

USB Type-C protection and filtering demo PCB

Key Features

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

Show More

X-NUCLEO-NFC05A1

NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos

Key Features

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN4974
      Antenna matching for ST25R3911B/ST25R391x devices
      2.0
      3 MB
      PDF
      AN4914
      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices
      2.0
      1.9 MB
      PDF
      AN4900
      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications
      4.0
      1.1 MB
      PDF
      AN5043
      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices
      4.0
      873.78 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN4871
      USB Type-C protection and filtering
      2.1
      2.42 MB
      PDF
      AN4974

      Antenna matching for ST25R3911B/ST25R391x devices

      AN4914

      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices

      AN4900

      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications

      AN5043

      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices

      AN576

      PCB layout optimisation

      AN316

      Transil™ clamping protection mode

      AN4871

      USB Type-C protection and filtering

演示和培训资料

    • 描述 版本 文档大小 操作
      ST253911B-15 Product Presentation 1.0
      3.4 MB
      PDF

      ST253911B-15 Product Presentation

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      High performance NFC/RFID readers 1.0
      975.29 KB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      519.6 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      STM32 GUI solutions - Advanced HMI now achievable on embedded systems 17.12
      1.25 MB
      PDF
      STM32L4 Series - Ultra-low-power and performance 18.10
      437.71 KB
      PDF
      STM32L4+ Series - Ultra-low-power and more performance 18.05
      492.01 KB
      PDF
      STM32L5 Series - Excellence in ultra-low-power with more security 18.10
      240.29 KB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      527.9 KB
      PDF

      High performance NFC/RFID readers

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      STM32 GUI solutions - Advanced HMI now achievable on embedded systems

      STM32L4 Series - Ultra-low-power and performance

      STM32L4+ Series - Ultra-low-power and more performance

      STM32L5 Series - Excellence in ultra-low-power with more security

      Ultra-low clamping voltage 0201 ESD diodes

    • 描述 版本 文档大小 操作
      Protection devices selection guide 1.0
      1.27 MB
      PDF

      Protection devices selection guide

    • 描述 版本 文档大小 操作
      NFC solutions from ST 1.0
      5.1 MB
      PDF
      Products and solutions for Secure Wearables 1.0
      1.01 MB
      PDF

      NFC solutions from ST

      Products and solutions for Secure Wearables

设计工具

    • 产品型号

      Transient voltage suppressor smart selection tool

开发工具硬件

软件

    • 产品型号

      Bluetooth Low Energy software expansion for STM32Cube

    • 产品型号

      Sources of STM32L4 based firmware for ST25R3911B-DISCO

      Antenna Matching Tool for ST25R NFC/HF reader family

EMI Filtering and Signal Conditioning

Part number 描述
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
EMIF03-SIM02M8 3-line EMI filter and ESD protection for SIM card interfaces
MLPF-WB55-01E3 2.4 GHz low-pass filter matched to STM32WB55
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
3-line EMI filter and ESD protection for SIM card interfaces
2.4 GHz low-pass filter matched to STM32WB55

Interfaces and Transceivers

Part number 描述
ST8024L Smart card interface
Part number
Smart card interface

NFC

Part number 描述
ST25R3911B NFC / HF RFID Reader IC
ST25R3912 NFC / HF RFID Reader IC
Part number
NFC / HF RFID Reader IC
NFC / HF RFID Reader IC

Protection Devices

Part number 描述
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
ESDAXLC18-1BF4 Ultra Low Capacitance Single Line Bidirectional ESD Protection
ESDZV5-1BF4 Ultra Low clamping single line bidirectional ESD protection
TCPP01-M12 USB type-C port protection
Part number
High-power transient voltage supressor (TVS)
Ultra Low Capacitance Single Line Bidirectional ESD Protection
Ultra Low clamping single line bidirectional ESD protection
USB type-C port protection

无线收发器、MCU、模块

Part number 描述
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
Part number
Bluetooth® low energy wireless system-on-chip