智能手机、平板电脑和电子书阅读器

搜索历史

Please log in to show your saved searches.

概述

解决方案

硬件评估工具

资源

工具和软件

主要产品

开始

快速链接

智能手机、平板电脑和电子书阅读器采用了当今业界许多最先进的电子技术，已经作为个人设备在全球范围内变得无处不在。这些装置给设计师带来了很多挑战，因为他们需要将传感器、相机、处理、通信、电池、显示、扬声器、麦克风、指纹传感器等用户界面技术融入一个功能强大、可靠、安全、超高效的电池供电设备中。

ST提供的一系列产品可以帮助设计师应对这些挑战并设计最前沿的移动设备。我们通过运动和环境传感器、MEMS麦克风、飞行时间解决方案、图像和光学传感器、音频耳机和扬声器放大器、以及具有多点触控功能的触摸传感器控制器等产品提高了用户体验。采用集成无源器件技术、静电（ESD）保护和电磁干扰（EMI）过滤产品、以及一系列模拟产品对设备进行保护。我们使用安全元件和安全近场通信（NFC）解决方案保护设备。我们通过针对电池供电设备而优化的高效电源和能量管理产品（包括触摸屏电源管理和无线充电解决方案）为设备供电。我们还运用RF产品（包括智能天线调谐和RFSOI FEM解决方案）提高连接质量。

Standard Serial EEPROM

Low Dropout (LDO) Linear Regulators

Touchscreen Ics

Low Power Amplifiers

Headphone

Analog Switch/Multiplexers

Headset

Wireless Chargers

Optical Image Stabilization

Linear Current Regulators

产品型号

描述

状态

Core Products

Price (US$)*

Order / Download

Teseo-LIV3F

Key features

Simultaneously multiconstellation
-163 dBm navigation sensitivity
1.5 m CEP accuracy positioning
16 Mbit embedded Flash for data logging and FW upgrade
2.1 V to 4.3 V supply voltage range
Tiny LCC 18 pin package (9.7x10.1)
Operating temperature (-40°, 85°C)
Free FW configuration
17 μW standby current and 75 mW tracking power consumption

Tiny GNSS module

13.94

立即购买

EVB-LIV3F

Key features

ST Teseo-LIV3F GNSS platform
Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
USB Power Supply and battery charge
Internal battery footprint for standalone usage
ON/OFF and Reset buttons available
NMEA over
- UART by USB
- I2C by connector
PPS output
Leds:
- PPS
- Power

IMAGE

FEATURED RESOURCES

schematics bill of materials gerber

TESEO LIV3F module evaluation board

165.38

立即购买

TESEO-SUITE

Key features

Multiple GNSS tracer
Multiple protocol support
GNSS firmware configuration tool
GNSS flashing tool
Dead reckoning panel
NMEA diagnostic tool
Satellites signal monitoring viewer
Map viewer
Log viewer

PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

软件

产品型号	Software Version	供货状态	供应商	下载
TESEO-SUITE	5.2.3	Active	ST	获取软件

Teseo-LIV3F

描述 :

Tiny GNSS module

Quick view

Price (US$)*

13.94

Key features

Simultaneously multiconstellation
-163 dBm navigation sensitivity
1.5 m CEP accuracy positioning
16 Mbit embedded Flash for data logging and FW upgrade
2.1 V to 4.3 V supply voltage range
Tiny LCC 18 pin package (9.7x10.1)
Operating temperature (-40°, 85°C)
Free FW configuration
17 μW standby current and 75 mW tracking power consumption

EVB-LIV3F

描述 :

TESEO LIV3F module evaluation board

Quick view

Price (US$)*

165.38

Key features

ST Teseo-LIV3F GNSS platform
Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
USB Power Supply and battery charge
Internal battery footprint for standalone usage
ON/OFF and Reset buttons available
NMEA over
- UART by USB
- I2C by connector
PPS output
Leds:
- PPS
- Power

IMAGE

FEATURED RESOURCES

schematics bill of materials gerber

TESEO-SUITE

描述 :

PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

Quick view

Price (US$)*

软件

Key features

Multiple GNSS tracer
Multiple protocol support
GNSS firmware configuration tool
GNSS flashing tool
Dead reckoning panel
NMEA diagnostic tool
Satellites signal monitoring viewer
Map viewer
Log viewer

产品型号	Software Version	供货状态	供应商	下载
TESEO-SUITE	5.2.3	Active	ST	获取软件

产品型号	描述
STEVAL-STLCS02V1	SensorTile connectable sensor node: solder only	Quick view 主要特性 Very compact module for motion, audio, environmental sensing and Bluetooth^® low energy connectivity with a complete set of firmware examples Mobile connectivity via the STBLESensor app, available for iOS™ and Android™ Main components: STM32L476JG – 32-bit ultra-low-power MCU with Cortex^® M4F LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer MP34DT05-A – 64 dB SNR digital MEMS microphone BlueNRG-MS – Bluetooth low energy network processor BALF-NRG-02D3 – 50 Ω balun with integrated harmonic filter LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V 2 V - 5.5 V power supply range External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, DFSDM, USB OTG, ADC, GPIOs Solderable only interface (no connector on back side) SWD interface for debugging and programming capability CE certified RoHS and China RoHS compliant WEEE compliant FCC certified IC certified TYPE certified Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES BOM Gerber
ST25DV-DISCOVERY	Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability	Quick view 主要特性 Two ready-to-use printed circuit boards (PCB): ST25DV_Discovery_Mboard: STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM. LCD color screen (320 x 200 pixels) Touch screen driver Different color LEDs (power, user, ST link) User push button Joystick for menu selection Reset button On board ST link for microcontroller firmware upgrade and debug ST link mini USB User micro USB USB micro or mini connector for board powering Demonstration use cases stored in memory Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector ST25DV_Discovery_ANT_C5: 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB ST25DV04K Dynamic NFC / RFID tag I² C interface connector Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-BCNKT01V1	BlueCoin Starter kit	Quick view 主要特性 Contains FCC ID: S9NBCOIN01 Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img The development kit package includes: BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR CoinStation (STEVAL-BCNST01V1) board BlueCoin Cradle (STEVAL-BCNCR01V1) 130 mAh Li-Po battery Plastic box for housing the BlueCoin cradle and the battery SWD programming cable Software libraries and tools: STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube STBLESensor: iOS™ and Android™ demo apps BlueST-SDK: iOS and Android software development kit Compatible with STM32 ecosystem through STM32Cube support Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-BLUEMIC-1	Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module	Quick view 主要特性 Bluetooth^® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding: an ultra-low power ARM^® Cortex^® -M0 32-bit core architecture programmable embedded 160 KB Flash 24 KB embedded RAM with data retention On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps) Voltage supply: 1V8 or 3V3 Battery or USB powered 100 mAh Li-Ion battery On-board STBC08 linear Li-Ion battery charger SWD connector Included in the development kit package: STEVAL-BLUEMIC-1 Plastic box for housing STEVAL-BLUEMIC-1 100 mAh Li-Ion battery SWD programming cable SW development kit for audio and inertial MEMS data streaming over BLE ST BlueMS: Android and iOS demo App available in the respective stores CE certified RoHS and China RoHS compliant Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISB042V1	Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33	Quick view 主要特性 STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207) Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power) Total system efficiency up to 80% Configurable GPIOs for status indication I²C interface for communication with the host system Foreign object detection (FOD) Complete kit (IC, firmware) RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-SMARTAG1	NFC Dynamic Tag sensor node evaluation board	Quick view 主要特性 ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa HTS221 capacitive digital sensor for relative humidity and temperature STLQ015 low drop linear regulator power management CR2032 Battery powered (not included) STM32Cube function pack (FP-SNS-SMARTAG1) Android (Google Play) and iOS demo apps (ST SmarTag) Suitable for the following applications: Internet of Things Supply Chain and Cold-Chain Management Smart building, home and city Retail and apparel Smart packaging Medical and pharmaceutical Batteryless sensing Smart agriculture (soil control, animal tracking, etc.) Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
M24SR-DISCOVERY	Discovery kit for the M24SR series - Dynamic NFC/RFID tag	Quick view 主要特性 Ready-to-use printed circuit board (PCB) including: M24SR64-Y Dynamic NFC/RFID tag 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory LCD Color Screen (320*200 pixels) Different color LEDs USB microB connector for board powering JTAG connector for microcontroller firmware upgrade and debug Joystick for menu selection M24SR-DISCO-PREM specific features: Bluetooth module with audio outputs connected to Jack 3.5 Headset Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-NFC01A1	Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo	Quick view 主要特性 M24SR64-Y Dynamic NFC/RFID tag IC NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Powered through the Arduino UNO R3 connectors 3 color LEDs for general purpose Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-IKS01A1	Motion MEMS and environmental sensor expansion board for STM32 Nucleo	Quick view 主要特性 LSM6DS0: MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps) LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss) LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer HTS221: capacitive digital relative humidity and temperature DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index) Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-IDI003V2	Multi-sensor RF platform sensors board	Quick view 主要特性 Contains the following ST sensors: Pressure sensor LPS25HB Humidity sensor HTS221 Accelerometer LIS3DH Microphone MP34DT01 AFE for processing the MP34DT01 microphone signal based on TSV522 low power, low offset op-amp Android app available RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-CCA02M1	Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.	Quick view 主要特性 2 on-board MP34DT01-M digital MEMS microphones 6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx Synchronized acquisition and streaming of up to 4 microphones Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware Compatible with STM32 Nucleo boards Equipped with ST morpho connector (upwards and downwards) Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-MKI109V3	Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters	Quick view 主要特性 Compatible with all available ST MEMS adapter boards Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V Includes a DIL24 socket for easy MEMS adapter connection Adjustable MEMS DIL24 power supply DFU-compatible for USB microprocessor firmware update USB 2.0 full-speed compliant Embedded power monitoring circuitry on sensor supply voltage and current Debugging connector for SWD/JTAG Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-STLKT01V1	SensorTile development kit	Quick view 主要特性 Included in the development kit package: SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector 100 mAh Li-Ion battery Plastic box SWD programming cable Software libraries and tools STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming. FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs STBLESensor: iOS and Android demo Apps BlueST-SDK: iOS and Android Software Development Kit CE certified RoHS and China RoHS compliant WEEE compliant FCC (ID: S9NSTILE01) certified IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img TYPE certified (006-000482) Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-STLCS01V1	SensorTile connectable sensor node: plug or solder	Quick view 主要特性 Very compact module for motion, audio, environmental sensing and Bluetooth^® low energy connectivity with a complete set of firmware examples Mobile connectivity via the STBLESensor app, available for iOS™ and Android™ Main components: STM32L476JG – 32-bit ultra-low-power MCU with Cortex^® M4F LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer MP34DT05-A – 64 dB SNR digital MEMS microphone BlueNRG-MS – Bluetooth low energy network processor BALF-NRG-02D3 – 50 Ω balun with integrated harmonics filter LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V 2 V - 5.5 V power supply range External interfaces: UART, SPI, SAI (serial audio interface), I²C, DFSDM, USB OTG, ADC, GPIOs Pluggable or solderable interface SWD interface for debugging and programming capability CE certified RoHS and China RoHS compliant WEEE compliant FCC certified IC certified TYPE certified Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-IKS01A2	Motion MEMS and environmental sensor expansion board for STM32 Nucleo	Quick view 主要特性 LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps) LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss) LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer HTS221: capacitive digital relative humidity and temperature DIL24 socket for additional MEMS adapters and other sensors Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware I²C sensor hub features on LSM6DSL available Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-NFC04A1	Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo	Quick view 主要特性 Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo Up to 4-Kbit memory with NDEF support 54 mm diameter, single layer circular antenna Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connector Self-powered or powered through the Arduino™ UNO R3 connectors Three general purpose LEDs Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware FCC and IC verified RoHS compliant Show More Product Details 下载产品简介 IMAGE FEATURED RESOURCES Schematics BOM Gerber

产品型号

STEVAL-STLCS02V1

SensorTile connectable sensor node: solder only

Quick view

主要特性

Very compact module for motion, audio, environmental sensing and Bluetooth^® low energy connectivity with a complete set of firmware examples
Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
Main components:
- STM32L476JG – 32-bit ultra-low-power MCU with Cortex^® M4F
- LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
- LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
- LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
- MP34DT05-A – 64 dB SNR digital MEMS microphone
- BlueNRG-MS – Bluetooth low energy network processor
- BALF-NRG-02D3 – 50 Ω balun with integrated harmonic filter
- LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
2 V - 5.5 V power supply range
External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, DFSDM, USB OTG, ADC, GPIOs
Solderable only interface (no connector on back side)
SWD interface for debugging and programming capability
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC certified
IC certified
TYPE certified

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

BOM Gerber

ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Quick view

主要特性

Two ready-to-use printed circuit boards (PCB):
- ST25DV_Discovery_Mboard:
- STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
- LCD color screen (320 x 200 pixels)
- Touch screen driver
- Different color LEDs (power, user, ST link)
- User push button
- Joystick for menu selection
- Reset button
- On board ST link for microcontroller firmware upgrade and debug
- ST link mini USB
- User micro USB
- USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
ST25DV_Discovery_ANT_C5:
- 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
- ST25DV04K Dynamic NFC / RFID tag
- I² C interface connector
- Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-BCNKT01V1

BlueCoin Starter kit

Quick view

主要特性

Contains FCC ID: S9NBCOIN01
Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
The development kit package includes:
- BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
- CoinStation (STEVAL-BCNST01V1) board
- BlueCoin Cradle (STEVAL-BCNCR01V1)
- 130 mAh Li-Po battery
- Plastic box for housing the BlueCoin cradle and the battery
- SWD programming cable
Software libraries and tools:
- STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
- FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
- FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
- FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
- STBLESensor: iOS™ and Android™ demo apps
- BlueST-SDK: iOS and Android software development kit
- Compatible with STM32 ecosystem through STM32Cube support

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

Quick view

主要特性

Bluetooth^® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
- an ultra-low power ARM^® Cortex^® -M0 32-bit core architecture
- programmable embedded 160 KB Flash
- 24 KB embedded RAM with data retention
On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
Voltage supply: 1V8 or 3V3
Battery or USB powered
100 mAh Li-Ion battery
On-board STBC08 linear Li-Ion battery charger
SWD connector
Included in the development kit package:
- STEVAL-BLUEMIC-1
- Plastic box for housing STEVAL-BLUEMIC-1
- 100 mAh Li-Ion battery
- SWD programming cable
SW development kit for audio and inertial MEMS data streaming over BLE
ST BlueMS: Android and iOS demo App available in the respective stores
CE certified
RoHS and China RoHS compliant
Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

Quick view

主要特性

STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
Total system efficiency up to 80%
Configurable GPIOs for status indication
I²C interface for communication with the host system
Foreign object detection (FOD)
Complete kit (IC, firmware)
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-SMARTAG1

NFC Dynamic Tag sensor node evaluation board

Quick view

主要特性

ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
HTS221 capacitive digital sensor for relative humidity and temperature
STLQ015 low drop linear regulator power management
CR2032 Battery powered (not included)
STM32Cube function pack (FP-SNS-SMARTAG1)
Android (Google Play) and iOS demo apps (ST SmarTag)
Suitable for the following applications:
- Internet of Things
- Supply Chain and Cold-Chain Management
- Smart building, home and city
- Retail and apparel
- Smart packaging
- Medical and pharmaceutical
- Batteryless sensing
- Smart agriculture (soil control, animal tracking, etc.)

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

Quick view

主要特性

Ready-to-use printed circuit board (PCB) including:
- M24SR64-Y Dynamic NFC/RFID tag
- 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
- STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
- LCD Color Screen (320*200 pixels)
- Different color LEDs
- USB microB connector for board powering
- JTAG connector for microcontroller firmware upgrade and debug
- Joystick for menu selection
M24SR-DISCO-PREM specific features:
- Bluetooth module with audio outputs connected to Jack 3.5
- Headset

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Quick view

主要特性

M24SR64-Y Dynamic NFC/RFID tag IC
NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
Powered through the Arduino UNO R3 connectors
3 color LEDs for general purpose

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-IKS01A1

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

Quick view

主要特性

LSM6DS0: MEMS 3D accelerometer (±2/±4/±8 g) + 3D gyroscope (±245/±500/±2000 dps)
LIS3MDL: MEMS 3D magnetometer (±4/ ±8/ ±12/ 16 gauss)
LPS25HB*: MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
HTS221: capacitive digital relative humidity and temperature
DIL 24-pin socket available for additional MEMS adapters and other sensors (UV index)
Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-IDI003V2

Multi-sensor RF platform sensors board

Quick view

主要特性

Contains the following ST sensors:
- Pressure sensor LPS25HB
- Humidity sensor HTS221
- Accelerometer LIS3DH
- Microphone MP34DT01
AFE for processing the MP34DT01 microphone signal based on TSV522 low power, low offset op-amp
Android app available
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-CCA02M1

Digital MEMS microphones expansion board based on MP34DT01-M for STM32 Nucleo.

Quick view

主要特性

2 on-board MP34DT01-M digital MEMS microphones
6 slots to plug in digital microphone coupon boards such as STEVAL-MKI129Vx and STEVAL-MKI155Vx
Synchronized acquisition and streaming of up to 4 microphones
Free comprehensive development firmware library and audio capture plus USB streaming sample application which is compatible with STM32Cube firmware
Compatible with STM32 Nucleo boards
Equipped with ST morpho connector (upwards and downwards)
Equipped with Arduino UNO R3 connector (upwards) to allow multiple boards
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

Quick view

主要特性

Compatible with all available ST MEMS adapter boards
Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
Includes a DIL24 socket for easy MEMS adapter connection
Adjustable MEMS DIL24 power supply
DFU-compatible for USB microprocessor firmware update
USB 2.0 full-speed compliant
Embedded power monitoring circuitry on sensor supply voltage and current
Debugging connector for SWD/JTAG
Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-STLKT01V1

SensorTile development kit

Quick view

主要特性

Included in the development kit package:
- SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
- SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
- SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
- 100 mAh Li-Ion battery
- Plastic box
- SWD programming cable
Software libraries and tools
- STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
- FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
- STBLESensor: iOS and Android demo Apps
- BlueST-SDK: iOS and Android Software Development Kit
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
TYPE certified (006-000482)

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-STLCS01V1

SensorTile connectable sensor node: plug or solder

Quick view

主要特性

Very compact module for motion, audio, environmental sensing and Bluetooth^® low energy connectivity with a complete set of firmware examples
Mobile connectivity via the STBLESensor app, available for iOS™ and Android™
Main components:
- STM32L476JG – 32-bit ultra-low-power MCU with Cortex^® M4F
- LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
- LSM303AGR – Ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer
- LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer
- MP34DT05-A – 64 dB SNR digital MEMS microphone
- BlueNRG-MS – Bluetooth low energy network processor
- BALF-NRG-02D3 – 50 Ω balun with integrated harmonics filter
- LD39115J18R – 150 mA low quiescent current low noise LDO 1.8 V
2 V - 5.5 V power supply range
External interfaces: UART, SPI, SAI (serial audio interface), I²C, DFSDM, USB OTG, ADC, GPIOs
Pluggable or solderable interface
SWD interface for debugging and programming capability
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC certified
IC certified
TYPE certified

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-IKS01A2

Motion MEMS and environmental sensor expansion board for STM32 Nucleo

Quick view

主要特性

LSM6DSL MEMS 3D accelerometer (±2/±4/±8/±16 g) and 3D gyroscope (±125/±245/±500/±1000/±2000 dps)
LSM303AGR MEMS 3D accelerometer (±2/±4/±8/±16 g) and MEMS3D magnetometer (±50 gauss)
LPS22HB MEMS pressure sensor, 260-1260 hPa absolute digital output barometer
HTS221: capacitive digital relative humidity and temperature
DIL24 socket for additional MEMS adapters and other sensors
Free comprehensive development firmware library and example for all sensors compatible with STM32Cube firmware
I²C sensor hub features on LSM6DSL available
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Quick view

主要特性

Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
Up to 4-Kbit memory with NDEF support
54 mm diameter, single layer circular antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino™ UNO R3 connector
Self-powered or powered through the Arduino™ UNO R3 connectors
Three general purpose LEDs
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
FCC and IC verified
RoHS compliant

Product Details 下载产品简介

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

00 选择要下载的文档

技术文档

产品规格

描述	版本	文档大小	操作
DB2379 300 mA triple DC-DC converter for powering AMOLED displays	2.0	247.59 KB	PDF
DS12218 Multi-mode Qi/AirFuel inductive wireless power receiver for 15 W applications with transmitter functions	2.0	2.47 MB	PDF
DB3196 Multi-mode Qi/AirFuel inductive wireless power receiver with transmitter function	1.0	458.09 KB	PDF
DB2656 Ultra low-power capacitive multi-touch screen controller for 2” to 13” screens	1.0	189.25 KB	PDF

DB2379

300 mA triple DC-DC converter for powering AMOLED displays

产品型号	描述
TS488	Pop-free 120mW stereo headphone amplifier
TS4962M	3 W filter-free class D audio power amplifier

产品型号	描述
BALF-CC26-05D3	50 Ω / conjugate match to CC2610, CC2620, CC2630, CC2640 and CC2650
BALF-NRG-02D3	50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI2-01D3	50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
BALF-SPI2-02D3	50 Ω nominal input / conjugate match balun to S2-LP, 433 - 470 MHz with integrated harmonic filter
ECMF4-20A42N10	Common mode filter with ESD protection
ECMF4-2450A17M10	Common-mode filter with ESD protection for high-speed serial interfaces
STHVDAC-256MTG	Antenna tuning circuit with TURBO & GLIDE
STPTIC-27L2	Parascan™ tunable integrated capacitor
STPTIC-39G2	3p9 Tunable capacitor
STPTIC-82G2	8p2 Tunable capacitor

产品型号	描述
L20G20IS	2-axis gyroscope for optical image stabilization (OIS)
LIS2DS12	3-axis MEMS accelerometer, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, ultra-low-power, high-performance acceleration sensor
LPS22HB	Ultra-compact piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, full-mold, holed LGA package (HLGA)
LSM6DSL	iNEMO 6DoF inertial measurement unit (IMU), for smart phones and battery operated IoT, Gaming, Wearable and Consumer Electronics. Ultra-low power and high accuracy
LSM6DSM	iNEMO 6DoF inertial measurement unit (IMU), for smart phones with OIS / EIS and AR/VR systems. Ultra-low power, high accuracy and stability

产品型号	描述
LD56050	500mA ultra low dropout linear regulator with bias supply
LD56100	1A very low dropout fast transient ultra-low noise linear regulator
LD59030	300 mA very low dropout current linear regulator IC
LDLN025	250 mA ultra-low noise LDO
STC3117	Gas gauge IC with battery charger control for handheld applications

产品型号	描述
ESDA22P150-1U3M	High Power Transient Voltage Suppressor
ESDA7P120-1U1M	High-power transient voltage supressor (TVS)
ESDZV5-1BU2	Ultra Low clamping single line bidirectional ESD protection

产品型号	描述
STM6519	Single push-button Smart Reset
STM6520	Dual push-button smart reset with push-button controlled output delay

产品型号	描述
ST21NFCD	NFC Controller supporting Active Load Modulation booster
ST33J2M0	32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
ST54H	SIP (ST21NFCD controller & ST33J2M0 Secure Element)

描述	版本	文档大小	操作
AN5085 Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process	2.0	306.83 KB	PDF
AN4653 Cycling endurance and data retention of high density EEPROM based on CMOS F8H process	1.0	267.34 KB	PDF
AN4910 Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx	1.0	585.2 KB	PDF
AN2862 Demonstration board user guidelines for the TS2007FC 3 W filter-free class D audio amplifier with 6-12 dB fixed gain select	1.2	147.45 KB	PDF
AN3261 Dual push-button Smart Reset™ devices with user-adjustable setup delays	1.1	630.21 KB	PDF
AN4913 Energy harvesting delivery impact on ST25DVxxx behavior during RF communication	1.0	1.05 MB	PDF
AN4503 环境传感器：用于Android 的硬件抽象层	1.0	430.49 KB	PDF
AN4722 HTS221数字湿度传感器：系统硬件集成指南	1.0	1,003.95 KB	PDF
AN2866 How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags	3.0	615.85 KB	PDF
AN2972 How to design an antenna for dynamic NFC tags	9.0	1.59 MB	PDF
AN2648 Increasing the resolution of analog temperature sensors	1.4	161.7 KB	PDF
AN4506 L3GD20H：3轴数字输出陀螺仪	1.0	1.54 MB	PDF
AN4748 LIS2DS12: always-on 3D accelerometer	5.0	817.27 KB	PDF
AN5038 LIS2DW12：始终开启的3D 加速度计	1.0	3 MB	PDF
AN5069 LIS2MDL：超低功耗、高性能3D磁力计	1.0	493.75 KB	PDF
AN4672 LPS22HB/LPS25HB数字压力传感器：系统硬件集成指南	1.0	1.24 MB	PDF
AN5063 LPS33HW digital pressure sensor: guidelines for system integration	1.0	681.3 KB	PDF
AN5040 LSM6DSL: always-on 3D accelerometer and 3D gyroscope	3.0	1.5 MB	PDF
AN4987 LSM6DSM: always-on 3D accelerometer and 3D gyroscope	5.0	1.73 MB	PDF
AN5113 MEMS motion sensor: L20G20IS ultra-compact two-axis gyroscope for optical image stabilization	1.0	397.22 KB	PDF
AN4833 Measuring pressure data from ST's LPS22HB digital pressure sensor	2.0	923.98 KB	PDF
AN1957 Microprocessor supervisor functions	2.0	577.14 KB	PDF
AN4911 NDEF management with ST25DVxxx and ST25TVxxx products	4.0	460.67 KB	PDF
AN4508 Parameters and calibration of a low-g 3-axis accelerometer	1.0	303.76 KB	PDF
AN1336 Power-fail comparator for NVRAM supervisory devices	2.0	127.81 KB	PDF
AN4598 Pre-amplifying the analog output of a MEMS microphone	1.0	325.46 KB	PDF
AN1012 预测NVRAM 和串行RTC 的电池寿命和数据保存期限	1.0	813.03 KB	PDF
AN1000 Reduced footprint ZEROPOWER® and TIMEKEEPER® supervisor surface-mount solution	2.0	62.06 KB	PDF
AN4870 STC3117 system integration	1.0	1.44 MB	PDF
AN2526 STMAV340 evaluation board and PCB layout recommendation	1.3	179.39 KB	PDF
AN4433 将数据存入M24SR 的NDEF 存储器	1.0	523.66 KB	PDF
AN2621 TS488/9 low power stereo headphone amplifier evaluation board user guidelines	1.2	67.97 KB	PDF
AN2622 TS4909 low power stereo headphone amplifier evaluation board user guidelines	1.2	105.14 KB	PDF
AN2406 TS4962IQ class D audio amplifier evaluation board user guidelines	2.3	135.67 KB	PDF
AN1766 TS4990 low voltage audio power amplifier evaluation board user guidelines	3.2	104.79 KB	PDF
AN2474 TS4995 1.2W fully differential audio power amplifier with selectable standby and 6db fixed gain - evaluation board user guidelines	1.4	127.69 KB	PDF
AN4509 Tilt measurement using a low-g 3-axis accelerometer	1.1	248.93 KB	PDF
AN4825 Ultra-compact high-performance eCompass module based on the LSM303AGR	1.0	1.67 MB	PDF
AN2240 Using the demonstration board for the TS472 low noise microphone preamplifier with 2 V bias	4.2	236.53 KB	PDF
AN2483 Video signal standards	1.2	42.72 KB	PDF

描述	版本	文档大小	操作
DT0053 6-point tumble sensor calibration	1.0	464.9 KB	PDF
DT0076 Compensating for accelerometer installation error: zeroing pitch and roll for a reference orientation	1.0	490.58 KB	PDF
DT0058 计算倾斜测量和倾斜补偿电子罗盘	1.0	155.47 KB	PDF
DT0059 用于传感器校准的椭球或球体拟合	1.0	204.1 KB	PDF
DT0060 利用陀螺仪更新倾斜测量和电子罗盘	1.0	155.73 KB	PDF
DT0096 LPS33HW digital pressure sensor: hardware guidelines for system integration	1.0	233.85 KB	PDF
DT0097 Setting up 6D orientation detection with ST's MEMS accelerometers	1.0	550.71 KB	PDF
DT0100 Setting up free-fall recognition with ST's MEMS accelerometers	1.0	375.78 KB	PDF
DT0101 Setting up single-tap and double-tap recognition with ST's MEMS accelerometers	1.0	440.6 KB	PDF
DT0098 Setting up wake-up recognition and absolute/relative references with ST's MEMS accelerometers	1.0	687.53 KB	PDF

描述	版本	文档大小	操作
EEPROM in WLCSP July 2016	1.4	281.42 KB	PDF
I2C EEPROM in DFN5 small package	1.0	555.19 KB	PDF
M24SR Product Presentation	2.1	1.27 MB	PDF
ST25DV-I2C product presentation	2.2	2.1 MB	PDF

产品型号	制造商	描述
AlgoBuilder	ST	Application for the graphical design of algorithms
AndroidHAL-IIO	ST	Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)
AndroidHALInput	ST	Android sensor HAL for MEMS motion and environmental sensors (Input framework)
C-Driver-MEMS	ST	Standard C platform-independent drivers for MEMS motion and environmental sensors
LinuxDriverIIO	ST	Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)
LinuxDriverInput	ST	Linux device drivers for MEMS motion and environmental sensors (Input framework)

搜索历史

收藏

智能手机、平板电脑和电子书阅读器

精选 视频

SL-IOTSMI-B001

技术文档

演示和培训资料

出版刊物和宣传资料

软件

Audio ICs

EMI Filtering and Signal Conditioning

MEMS and Sensors

NFC

电源管理

Protection Devices

Reset and Supervisor ICs

Secure MCUs

Touch and Display Controllers

精选视频