固件无线服务（FOTA）

主要特性

• SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
• Integrated programmer - debugger.
• JTAG interface (Standard 7x2 male 100mil).
• 2 ISO CAN FD port (DB9 connector).
• 1 Ethernet port.
• 1 FlexRay, 1 LIN (with transceiver).
• 1 USB virtual COM Port.
• Connectors Arduino UNO R3-compatible.
• 3 Push buttons, 3 LEDs for user purpose.
• 2 potentiometers for ADC quick evaluation.
• Reset push button.
• All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
• 12MHz crystal.
• Board Supply: 12 VDC (external power
• supply).
• Board size 150 x 101 mm.

显示较多内容

主要特性

• SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture^® Technology CPU, 1MB Code Flash in eQFP64 package.
• On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
• USB Virtual Communication port.
• Two types of extension resources:
  • Arduino Uno Revision 3 connectivity
  • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
• Flexible board power supply:
  • USB port (mini B - 5V)
  • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
• Two push buttons: USER and RESET
• Eight LEDs
  • 3 Integrated Programmer/Debugger
  • 3 LEDs User
  • 1 Reset
  • 1 Power LED: +5V
• 40MHz Crystal

显示较多内容

主要特性

• DC-DC1 working at 1.2 V, 2 MHz
• DC-DC2 working at 5 V, 250 kHz
• Input connector to sync a different working frequency up to 2MHz
• Oscillator on board to change working frequency up to 2MHz
• DC-DC1 and DC-DC2 working up to 3A
• LDO working at 3.3 V, 250 mA
• Possibility to change output voltages
• Jumpers to enable or disable DC-DC
• Jumpers to enable or disable LDO
• Pins to independently supply DC-DC1 and DC-DC2 together with LDO
• Output connectors to check output voltages

显示较多内容

主要特性

• Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
• 2 Ethernet ports
• 1 CAN FD port (DB9 connector)
• JTAG interface (14 pin - 2x7 connector)
• 2 Push buttons, 4 LEDs for user purposes, reset push button
• Board Supply: 12 VDC (external power supply)
• Connector suitable for TFT LCD module
• Board size 145 x 105 mm

显示较多内容

主要特性

• Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
• The kit includes
  • 10 samples

显示较多内容

主要特性

• Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
• Supports SPC5x MCUs
• Supports Multicore, eTPU and GTM debugging
• Includes FLASH programming capability
• Support service provided through STMicroelectronics

显示较多内容

主要特性

• 4 V to 38 V operating input voltage
• Low consumption mode or low noise mode
• 30 µA I_Q at light load (LCM V_OUT = 3.3 V)
• 5 µA I_Q-SHTDWN
• Adjustable f_SW (250 kHz - 2 MHz)
• Output voltage adjustable from 0.85 V to V_IN
• Embedded output voltage supervisor
• Synchronization
• Adjustable soft-start time
• Internal current limiting
• Overvoltage protection
• Output voltage sequencing
• Peak current mode architecture
• R_DS(on)HS = 180 mΩ; R_DS(on)LS = 150 mΩ
• Thermal shutdown
• RoHS compliant

显示较多内容

主要特性

• DC-DC1 working at 1.2 V, 2 MHz
• DC-DC2 working at 5 V, 250 kHz
• Input connector to sync a different working frequency up to 2MHz
• Oscillator on board to change working frequency up to 2MHz
• DC-DC1 and DC-DC2 working up to 3A
• LDO working at 3.3 V, 250 mA
• Possibility to change output voltages
• Jumpers to enable or disable DC-DC
• Jumpers to enable or disable LDO
• Pins to independently supply DC-DC1 and DC-DC2 together with LDO
• Output connectors to check output voltages

显示较多内容