概述
解决方案
硬件评估工具
资源
Tools and Software
主要产品
开始

车辆对车辆(V2V)和车辆对基站(V2I)的通信统称为车联网(V2X)无线技术,旨在实现车辆与其周围环境之间的数据交换。

V2X技术基于5.9 GHz专用近程通信,这是一种专为快速移动物体定义的Wi-Fi衍生产品,即使在非视距条件下也能建立可靠的无线电链路。

V2X系统将数据(例如位置和速度)与周围的车辆和基站共享,可帮助驾驶员意识到即将发生的潜在危险,显著增强防撞效果,从而大大降低死亡率和人身伤害严重程度。此外,该技术还能够对即将到来的交通拥堵发出警告,提出替代路线,并借助自适应巡航系统和更加智能化的运输管理减少二氧化碳排放,确保环保驾驶,进而提高交通效率。

ST与V2X芯片组市场领导者Autotalks建立了长期合作伙伴关系,致力于共同开发符合汽车行业质量标准的、面向公开市场进行优化的V2X芯片组。

产品型号
描述
STEVAL-MKI110V1 AIS328DQ adapter board for standard DIL24 socket Quick view

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI109V2 eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

STEVAL-ISA100V1 3 A step-down switching demonstration board based on the L7986A in HSOP8 package Quick view

主要特性

  • 3 A DC output current
  • 4.5 V to 38 V input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency, programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-MKI125V1 A3G4250D adapter board for standard DIL 24 socket Quick view

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-ISA160V1 3 A / 2.3 MHz step-down synchronous switching regulator based on the AST1S31HF in a DFN 3x3 package Quick view

主要特性

  • AECQ100 qualification
  • 3 A DC output current
  • 2.8 V to 4 V input voltage
  • Output voltage adjustable from 0.8 V
  • 2.3 MHz switching frequency
  • Internal soft-start and enable
  • Integrated 70 mΩ and 55 mΩ power MOSFETs
  • All ceramic capacitor
  • Power good (POR)
  • Cycle by cycle current limiting
  • Current fold back short circuit protection
  • VFDFPN 3x3 - 8L package
  • RoHS compliant

Show More

STEVAL-MKI158V1 AIS3624DQ adapter board for a standard DIL24 socket Quick view

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

EVAL-L5963 L5963 Evaluation board Quick view

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-OET002V1 MDI BRR board for EMIF02-01OABRY or EMIF02-02OABRY Quick view

主要特性

  • Includes the EMIF02-01OABRY highly integrated solution designed to suppress EMI noise and protect against ESD
  • Attenuation profile compliant with BroadR Reach™ requirements, from - 40 °C to 125 °C
  • Compliant with ISO10605, ISO7637-3 standards
  • RoHS compliant

Show More

STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection Quick view

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

EVAL-L5963Q L5963Q evaluation board Quick view

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

EVB-T3 TESEO III evaluation board Quick view

主要特性

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

STEVAL-IDB007V2 STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1 Quick view

主要特性

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

产品型号
STEVAL-MKI110V1

AIS328DQ adapter board for standard DIL24 socket

主要特性

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

图片

Image
Image
STEVAL-MKI109V2

eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

STEVAL-ISA100V1

3 A step-down switching demonstration board based on the L7986A in HSOP8 package

主要特性

  • 3 A DC output current
  • 4.5 V to 38 V input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency, programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

STEVAL-MKI125V1

A3G4250D adapter board for standard DIL 24 socket

主要特性

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主要特性

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-ISA160V1

3 A / 2.3 MHz step-down synchronous switching regulator based on the AST1S31HF in a DFN 3x3 package

主要特性

  • AECQ100 qualification
  • 3 A DC output current
  • 2.8 V to 4 V input voltage
  • Output voltage adjustable from 0.8 V
  • 2.3 MHz switching frequency
  • Internal soft-start and enable
  • Integrated 70 mΩ and 55 mΩ power MOSFETs
  • All ceramic capacitor
  • Power good (POR)
  • Cycle by cycle current limiting
  • Current fold back short circuit protection
  • VFDFPN 3x3 - 8L package
  • RoHS compliant

Show More

STEVAL-MKI158V1

AIS3624DQ adapter board for a standard DIL24 socket

主要特性

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

EVAL-L5963

L5963 Evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-OET002V1

MDI BRR board for EMIF02-01OABRY or EMIF02-02OABRY

主要特性

  • Includes the EMIF02-01OABRY highly integrated solution designed to suppress EMI noise and protect against ESD
  • Attenuation profile compliant with BroadR Reach™ requirements, from - 40 °C to 125 °C
  • Compliant with ISO10605, ISO7637-3 standards
  • RoHS compliant

Show More

STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

主要特性

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

主要特性

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

EVAL-L5963Q

L5963Q evaluation board

主要特性

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

EVB-T3

TESEO III evaluation board

主要特性

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

STEVAL-IDB007V2

STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1

主要特性

  • Bluetooth® SMART board based on the BlueNRG-1 Bluetooth low energy system on chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® low energy compliant, supports master, slave and simultaneous master-and-slave roles
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      AN5092
      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications
      2.0
      521.09 KB
      PDF
      AN4872
      BlueNRG-1 and BlueNRG-2 UART bootloader protocol
      3.0
      4.7 MB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN4869
      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade
      5.1
      1.02 MB
      PDF
      AN4392
      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band
      3.3
      540.17 KB
      PDF
      AN5092

      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications

      AN4872

      BlueNRG-1 and BlueNRG-2 UART bootloader protocol

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN4869

      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade

      AN4392

      Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band

    • 描述 版本 文档大小 操作
      TN1189
      A3G4250D: supplementary data related to the 3-axis digital output gyroscope
      1.0
      160.14 KB
      PDF
      TN0897
      ST SPI protocol
      2.3
      421.19 KB
      PDF
      TN0018
      LGA 封装中MEMS 传感器的表面贴装指南
      1.0
      251.2 KB
      PDF
      TN1189

      A3G4250D: supplementary data related to the 3-axis digital output gyroscope

      TN0897

      ST SPI protocol

      TN0018

      LGA 封装中MEMS 传感器的表面贴装指南

    • 描述 版本 文档大小 操作
      DT0063
      Bluetooth low-energy network: time-stamping and sample-rate-conversion
      2.0
      281.1 KB
      PDF
      DT0063

      Bluetooth low-energy network: time-stamping and sample-rate-conversion

演示和培训资料

    • 描述 版本 文档大小 操作
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      AST1S3x family Power optimization for postregulated automotive systems 1.0
      896.44 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      Creating Value through Partnership - Global V2X Solution 1.0
      4.92 MB
      PDF
      MEMS automotive sensors - Making our cars safer and more comfortable 1.0
      773.66 KB
      PDF
      Processor for Telematics and Connectivity 1.0
      5.69 MB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      TESEO-DRAW Dead Reckoning Automotive Way 1.0
      2.3 MB
      PDF
      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver 1.0
      754.65 KB
      PDF
      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity 1.0
      712.64 KB
      PDF

      A798x, A597x switching regulators for car power management

      AST1S3x family Power optimization for postregulated automotive systems

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      Creating Value through Partnership - Global V2X Solution

      MEMS automotive sensors - Making our cars safer and more comfortable

      Processor for Telematics and Connectivity

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      TESEO-DRAW Dead Reckoning Automotive Way

      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver

      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity

    • 描述 版本 文档大小 操作
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      Linear and Switching Voltage Regulators Selection Guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • 描述 版本 文档大小 操作
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      SPC58 C-line 1.0
      933.22 KB
      PDF

      Driving smart power in automotive

      SPC58 C-line

设计工具

    • 产品型号

      Smart Selector for Micro 32bit Power Architecture products

开发工具硬件

    • 产品型号

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

软件

    • 产品型号

      Dead Reckoning Automotive Way - Sensor fusion firmware for Teseo Family (STA80)

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

    • 产品型号

      Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)

      Android sensor HAL for MEMS motion and environmental sensors (Input framework)

      Standard C platform-independent drivers for MEMS motion and environmental sensors

      Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

      Linux device drivers for MEMS motion and environmental sensors (Input framework)

eDesignSuite

转换器

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

二极管(功率肖特基和场效应整流)产品选择器

TVS产品选择器

Automotive Analog and Power

产品型号 描述
L5963 Dual monolithic switching regulator with LDO and HSD
L9616 High Speed Can Bus Transceiver
产品型号
Dual monolithic switching regulator with LDO and HSD
High Speed Can Bus Transceiver

Automotive Infotainment and Telematics

产品型号 描述
STA1385 Telemaco3P automotive family of telematics and connectivity microprocessor
STA8090GAT Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver
产品型号
Telemaco3P automotive family of telematics and connectivity microprocessor
Automotive Grade GPS/Galileo/Glonass/Beidou/QZSS receiver

EMI Filtering and Signal Conditioning

产品型号 描述
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
产品型号
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter

MEMS and Sensors

产品型号 描述
A3G4250D 3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
AIS328DQ Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
AIS3624DQ 3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
ASM330LHH Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope
产品型号
3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope

电源管理

产品型号 描述
A7985A 2 A step-down switching regulator for automotive applications
A7986A 3 A step-down switching regulator for automotive applications
A7987 61 V 3A asynchronous step-down switching regulator with adjustable current limitation for automotive
AST1S31HF Up to 4 V, 3 A step-down 2.3 MHz switching regulator for automotive applications
产品型号
2 A step-down switching regulator for automotive applications
3 A step-down switching regulator for automotive applications
61 V 3A asynchronous step-down switching regulator with adjustable current limitation for automotive
Up to 4 V, 3 A step-down 2.3 MHz switching regulator for automotive applications

Protection Devices

产品型号 描述
EMIF02-02OABRY IPAD™ automotive-grade integrated protected low-pass filter for BroadR-Reach® interfaces
ESDAXLC6-1BT2Y Automotive single-line bidirectional ESD protection for high speed interface
产品型号
IPAD™ automotive-grade integrated protected low-pass filter for BroadR-Reach® interfaces
Automotive single-line bidirectional ESD protection for high speed interface

Secure MCUs

产品型号 描述
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
产品型号
32bit ARM® SecurCore® SC300 optimized for M2M for car

无线收发器、MCU、模块

产品型号 描述
BlueNRG-1 Bluetooth Low Energy System On Chip
产品型号
Bluetooth Low Energy System On Chip
支持中心或 提供反馈