产品概述
描述
The TS4962M is a differential Class-D BTL power amplifier. It is able to drive up to 2.3 W into a 4 Ω load and 1.4 W into a 8 Ω load at 5 V. It achieves outstanding efficiency (88 % typ.) compared to classical Class-AB audio amps. The gain of the device can be controlled via two external gain-setting resistors. Pop and click reduction circuitry provides low on/off switch noise while allowing the device to start within 5 ms. A standby function (active low) allows the reduction of current consumption to 10 nA typ.-
所有功能
- Operating from VCC = 2.4 V to 5.5 V
- Standby mode active low
- Output power: 3 W into 4 Ω and 1.75 W into 8 Ω with 10 % THD+N max. and 5 V power supply
- Output power: 2.3 W @5 V or 0.75 W @ 3.0 V into 4 Ω with 1 % THD+N max.
- Output power: 1.4 W @5 V or 0.45 W @ 3.0 V into 8 Ω with 1 % THD+N max.
- Adjustable gain via external resistors
- Low current consumption 2 mA @ 3 V
- Efficiency: 88 % typ.
- Signal to noise ratio: 85 dB typ.
- PSRR: 63 dB typ. @217 Hz with 6 dB gain
- PWM base frequency: 250 kHz
- Low pop and click noise
- Available in Flip Chip 9 x 300 μm (Pb-free)
电路原理图
EDA符号、封装和3D模型
STMicroelectronics - TS4962M
为您的应用下载所有EDA符号、封装和3D模型，加快您的设计速度。您可以从大量CAD格式中进行选择，以匹配您的设计工具链。
符号
封装
3D模型
质量与可靠性
| 产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| TS4962MEIJT |
批量生产
|
CSP P 0.5 mm | 工业 | Ecopack3 | |
| TS4962MEIKJT |
批量生产
|
CSP P 0.5 mm | 工业 | Ecopack3 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
样片和购买
| 产品型号 | 从分销商订购 | 从ST订购 | 供货状态 | ECCN (US) | ECCN (EU) | 包装类型 | 封装 | 温度（ºC） | Country of Origin | Budgetary Price (US$)*/Qty | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||
| TS4962MEIJT | 1 distributors |
批量生产
|
EAR99 | NEC | Tape And Reel | CSP P 0.5 mm | -40 | 85 | CHINA | 0.2109 / 1k | ||
| TS4962MEIKJT | 1 distributors | Buy Direct |
批量生产
|
EAR99 | NEC | Tape And Reel | CSP P 0.5 mm | - | - | CHINA | ||
供货状态
批量生产ECCN (US)
EAR99Budgetary Price (US$)*/Qty
0.2109 / 1k