-
L5965 is a multiple voltage regulator composed by two battery compatible BUCK pre-regulators (one of which is a controller), two BUCK post regulators with internal compensation, one BOOST, one LDO and a precise voltage reference regulator. All the regulators, except the BUCK1 pre-regulator, have internal power switches.
OTP (One Time Programmable) cells are used for the main device parameters programming (output voltages and currents, switching frequencies) and to configure power up sequence.
An SPI interface can be used to enable or disable the single voltage regulators, for diagnostic information and to program internal blocks parameters (monitor and Power Good thresholds, slew rate, etc.).
The device offers a set of features to support applications that need to fulfill functional safety requirements as defined by Automotive Safety Integrity Level (ASIL) A-B-C-D.Key Features
- AEC-Q100 qualified
- Pre SMPS BUCK1 regulator controller, adjustable via OTP to 0.8 V, 1.0 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 3.8 V, 5.0 V @ 0.4 MHz
- Pre SMPS BUCK2 regulator, adjustable via OTP to 1.0 V, 1.1 V, 1.2 V, 1.35 V, 1.5 V, 3.3 V, 3.6 V, 5.0 V @ 1.35/2.6 A min peak current limit, 0.4/2.4 MHz
- Post SMPS BUCK3 regulator, adjustable via OTP to 1.0 V, 1.2 V, 1.35 V, 1.8 V, 2.0 V, 2.3 V, 2.5 V, 3.3 V @ 1.4 A min peak current limit, 2.4 MHz
- Post SMPS BUCK4 regulator, adjustable via OTP to 1.1 V, 1.12 V, 1.2 V, 1.25 V, 1.3 V, 1.35 V, 1.8 V, 3.3 V @ 1 A min peak current limit, 2.4 MHz
- Post SMPS BOOST regulator, adjustable via OTP to 5.0 V@0.3 A max load current, 7.0 V @ 0.2 A max load current, 2.4 MHz
- Post Linear regulator LDO, adjustable via OTP to 1.2 V, 1.25 V, 1.3 V, 1.8 V, 2.5 V, 2.8 V, 3.3 V, 5.0 V @ 300/600 mA max load current
- Precise Voltage reference, adjustable via OTP to 1.8 V, 2.5 V, 3.3 V, 4.1 V @ 20 mA max load current
- SPI interface with CRC
- Programmable slew rate/soft start
- Voltage supervisors
- Spread frequency spectrum
- Reset and reset activation list
- Adjustable window watchdog supervisors
- Power up phase programmable via OTP
- Short circuit protected outputs and Fault detection pin to Microcontroller
- Low external components number
- Thermal shutdown junction temperature 175 °C
样片和购买
| 产品型号 | 封装 | 包装类型 | 温度（ºC） | 供货状态 | 预算价格(US$) | 数量 | ECCN (US) | Country of Origin | More info | 从分销商订购 | 从ST订购 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| min | max | |||||||||||
| L5965SQ-V0Y | VFQFPN 48 7x7x1.0 | Tray | -40 | 105 |
批量生产
|
5 | 1000 | EAR99 | - | 没有经销商，请联系我们的销售办事处 | ||
| L5965SQ-V0T | VFQFPN 48 7x7x1.0 | Tape And Reel | -40 | 105 |
批量生产
|
5.0 | 1000 | EAR99 | - | 查看供货情况 | 立即购买 | |
L5965SQ-V0Y
封装
VFQFPN 48 7x7x1.0包装类型
Tray单价(US$)
5.0*
评估工具
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | Material Declaration** |
|---|---|---|---|---|---|
| L5965SQ-V0T |
批量生产
|
VFQFPN 48 7x7x1.0 | 汽车 | Ecopack2 | |
| L5965SQ-V0Y |
批量生产
|
VFQFPN 48 7x7x1.0 | 汽车 | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
