产品概述
描述
The L9954 and L9954XP are microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and three grounded resistive loads can be driven with three half bridges and three highside drivers.
The integrated standard serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance). All diagnostic informations are available via SPI.
-
所有功能
- Overload diagnostic for all outputs
- Open load diagnostic for all outputs
- Charge pump output for reverse polarity protection
- PWM control of all outputs
- Current monitor output for highside OUT1, OUT4, OUT5 and OUT6
- All outputs short circuit protected
- Three half bridges for 1.5A load (Ron=800m
) - Two highside drivers for 1.5A load (Ron=800m
) - One highside driver for 6A load (Ron=100m
) - Very low current consumption in standby mode (IS < 6μA typ; Tj ≤ 85 °C)
- All outputs over temperature protected
- Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A)
电路原理图
EDA符号、封装和3D模型
质量与可靠性
产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
---|---|---|---|---|---|
L9954XP | NRND | PowerSSO 36 | 汽车应用 | Ecopack2 | |
L9954XPTR | NRND | PowerSSO 36 | 汽车应用 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持。
样片和购买
产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 封装 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度(ºC) | Operating Temperature (°C) (min) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
最小值 | 最大值 | |||||||||||||
L9954XP | | | distributors 无法联系到经销商,请联系我们的销售办事处 | PowerSSO 36 | Tube | MALAYSIA | EAR99 | NEC | - | - | - | |||
L9954XPTR | | | distributors 无法联系到经销商,请联系我们的销售办事处 | PowerSSO 36 | Tape and Reel | MALAYSIA | EAR99 | NEC | - | - | - |
L9954XP NRND
L9954XPTR NRND