产品概述
描述
The L99DZ80EP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers. Four external MOS transistors in bridge configuration can be driven. An electrochromic mirror glass can be controlled using the integrated SPI-driven module in conjunction with an external MOS transistor. The mirror glass can also be discharged through a negative supply. The integrated SPI controls all operating modes (forward, reverse, brake and high impedance). All diagnostic information is available via SPI read.
-
所有功能
- AEC-Q100 qualified
- One full bridge for 6 A load (RON= 150 mΩ)
- Two half bridges for 3 A load (RON= 300 mΩ)
- Two half bridges for 0.5 A load (RON= 1600 mΩ)
- One high-side driver for 5 A load (RON= 100 mΩ)
- One configurable high-side driver for up to 1.5 A (RON= 500 mΩ) or 0.35 A (RON= 1600 mΩ) load
- One configurable high-side driver for 0.7 A (RON= 800 mΩ) or 0.35 A (RON= 1600 mΩ) load
- Two high-side drivers for 0.5 A load (RON= 1600 mΩ)
- Programmable softstart function to drive loads with higher inrush currents as current limitation value
- Very low VScurrent consumption in standby mode (IS< 6 μA typ; Tj≤ 85 °C)
- Current monitor output for all high-side drivers
- Central two-stage charge pump
- Motor bridge driver with full Rdsondown to 6 V
- Device contains temperature warning and protection
- Open-load detection for all outputs
- Overcurrent protection for all outputs
- Separated half bridges for door lock motor
- Programmable PWM control of all outputs
- STM standard serial peripheral interface (ST-SPI 3.1)
- Control block for electrochromic element
- Electrochromic element can be negatively discharged
- Prepared for additional fail-safe path for H-bridge
特别推荐
EDA符号、封装和3D模型
STMicroelectronics - L99DZ80EP
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型
质量与可靠性
| 产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| L99DZ80EP | 批量生产 | TQFP 64 10x10x1.0 | 汽车应用 | Ecopack2 | |
| L99DZ80EPTR | 批量生产 | TQFP 64 10x10x1.0 | 汽车应用 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
样片和购买
| 产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 封装 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度（ºC） | Operating Temperature (°C) (min) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||||
| L99DZ80EPTR | | | distributors 无法联系到经销商，请联系我们的销售办事处 | TQFP 64 10x10x1.0 | Tape and Reel | MALAYSIA | EAR99 | NEC | -40 | 150 | -40 | |||
| L99DZ80EP | | | distributors 无法联系到经销商，请联系我们的销售办事处 | TQFP 64 10x10x1.0 | Tray | MALAYSIA | EAR99 | NEC | -40 | 150 | -40 | |||
L99DZ80EPTR 批量生产
L99DZ80EP 批量生产