产品概述
描述
The L99LDLH32 is a monolithic 32-channel linear current regulator specifically designed for automotive exterior O/LED rear lighting applications. Thanks to the high side configuration of the output channels, the L99LDLH32 is suitable to drive OLED panel with common cathode. It guarantees up to 35 V output driving capability - to cover the OLED forward voltage wide spread - and features 32 regulated current sources able to provide from 1 mA up to 15 mA individually programmable current to drive each pixel of the OLED panel independently. As the other device in the family (L99LDLL16), the L99LDLH32 integrates a robust purely automotive CAN FD Light compatible communication interface which allows a high rate data transmission (up to 1 Mbit/s) and uses CAN FD structure for long frames. Besides the CAN FD Light compatible physical layer, the device also integrates the protocol handler, so no additional external devices are needed to facilitate communication with Commander ECU. The L99LDLH32 can operate in bus mode using CAN FD Light compatible interface or in stand-alone/fail-safe mode using internal Few Time Programmable (FTP) memory registers.-
所有功能
- AEC-Q100 qualified
- General
- CAN FD Light compatible Serial Interface, Protocol Handler, Draft Specification Proposal (DSP) available from CAN in Automation (CiA)
- High precision oscillator integrated, no external quartz required
- QFN48L 7x7 with exposed pad
- Timeout watchdog with Limp Home
- Low standby current
- Stand Alone/Fail Safe and Bus mode operation
- Direct drive (1 Direct Input), for 1 function group supporting ASIL requirements
- Widest configurability by embedded non-volatile and volatile memories
- Operating supply voltage range5.5 V – 40 V
- Linear Regulators section
- Operating temperature range- 40°C – 150°C
- 32 constant current output channels, high side configuration
- Output current from 1 mA to 15 mA, parallelable outputs
- Output voltage up to 35 V
- Feedback voltage to external pre-regulator, to optimize the regulation voltage minimizing overall power dissipation
- Current setting per channel by 8-bit DAC
- Analogue dimming, 8-bit PWM channel individual exponential brightness control and 8-bit global PWM dimming
- Programmable PWM frequency
- Slow turn on/off time, gradual outputs delay and dithered clock, for better EMC performances
- Protection and diagnostic
- Integrated 8-bit ADC, for full and flexible diagnostic
- 1 dedicated line for fault bus
- Temperature warning (1 threshold)
- Over-temperature shutdown
- Short circuit and open load detection and protection
- Automatic LED current derating, through external NTC measurement and device junction temperature (TJ)
特别推荐
EDA符号、封装和3D模型
样片和购买
产品型号 | Order from distributors | 从ST订购 | 供货状态 | ECCN (US) | ECCN (EU) | 包装类型 | 封装 | 温度(ºC) | Country of Origin | Budgetary Price (US$)*/Qty | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
最小值 | 最大值 | |||||||||||
L99LDLH32TR | 无法联系到经销商,请联系我们的销售办事处 | 批量生产 | EAR99 | NEC | Tape and Reel | VFQFPN 48 7x7x1.0 mm | 150 | -40 | THAILAND | |
无法联系到经销商,请联系我们的销售办事处