产品概述
描述
The device is a single channel high-side driver manufactured using ST proprietary VIPower® M0-7 technology and housed in PowerSSO-36 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics. The device integrates advanced protective functions such as load current limitation and overload management by ΔTJ and over-temperature shut-down with latch-off.A toggling on the INPUT pin unlatches the output in case of fault.
A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCC and OFF-state open-load.
A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.
A R_mode pin allows to switch low respectively high RDSon operating mode, so to adapt current sense precision and current limitation accordingly to the selected load.
-
所有功能
- AEC-Q100 qualified
- Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
- General
- Single channel smart high-side driver
- Very low standby current
- Compatible with 3 V and 5 V CMOS outputs
- MultiSense diagnostic functions
- Multiplexed analog feedback of: load current, VCC supply voltage and TCHIP device temperature
- Overload and short to ground indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to VCC detection
- Sense enable/disable
- Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Latch-off on over-temperature (ΔTJ_SD or TSD)
- Loss of ground and loss of VCC
- Reverse battery with self switch of the PowerMOS
- Electrostatic discharge protection
您可能还会喜欢...
精选 视频
Electro-thermal simulator for devices in ViPower technology
特别推荐
All tools & software
EDA符号、封装和3D模型
STMicroelectronics - VN7000AY
为您的应用下载所有EDA符号、封装和3D模型，加快您的设计速度。您可以从大量CAD格式中进行选择，以匹配您的设计工具链。
符号
封装
3D模型
全部资源
| Resource title | 版本 | Latest update |
|---|
CAD Symbol & Footprint models (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| ZIP | 6.4 | 11 Nov 2020 | 11 Nov 2020 |
样片和购买
Don't show this again
| 产品型号 | Order from distributors | 从ST订购 | 供货状态 | ECCN (US) | ECCN (EU) | 包装类型 | 封装 | 温度（ºC） | Country of Origin | Budgetary Price (US$)*/Qty | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||
| VN7000AYTR | 无法联系到经销商，请联系我们的销售办事处 | 批量生产 | EAR99 | NEC | Tape and Reel | PWSSO 36 | - | - | MALAYSIA | | ||
无法联系到经销商，请联系我们的销售办事处
Buy Direct at ST Don't show this again