VNQ6040S-E

NRND
Design Win

四通道高侧驱动器

下载数据手册

产品概述

描述

The VNQ6040S-E is a device made using STMicroelectronics®VIPower®technology. It is intended for driving resistive or inductive loads directly connected to ground. The device is protected against voltage transient on VCCpin.

Programming, control and diagnostics are implemented via the SPI bus.

An analog current feedback for each channel is connected to the CURRENT-SENSE pin via a multiplexer. A CS_SYNC pin delivers a synchronous signal for sampling the current sense while the corresponding output is on.

The device detects open-load for both on-state and off-state conditions.

Real time diagnostic is available through the SPI bus (open-load, output short to VCC, overtemperature, communication error).

Output current limitation protects the device in an overload condition. The device can limit the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown can be configured as latched off or with automatic restart.

The device enters a limp home mode in case of loss of digital supply (VDD), reset of digital memory or CSN monitoring time-out event. In this mode states of channel 0, 1, 2 or 3 are respectively controlled by four dedicated pins IN0, IN1, IN2 and IN3. Each channel can be programmed in BULB/LED mode.

  • 所有功能

    • General
      • 16 bit ST-SPI for full and diagnostic
      • Programmable BULB/LED mode
      • Integrated PWM and phase shift generation unit
      • 160 Hz internal PWM fallback frequency
      • Advanced limp home functionalities for robust fail-safe system
      • Very low standby current
      • Optimized electromagnetic emissions
      • Very low electromagnetic susceptibility
      • In compliance with the 2002/95/EC
    • Diagnostic
      • Multiplex proportional load current sense
      • Synchronous diagnostic of overload and short to GND, output shorted to VCC, ON-state and OFF-state open-load
      • Programmable case overtemperature warning
    • Protections
      • Load current limitation
      • Self limiting of fast thermal transients
      • Power limitation and overtemperature shutdown (latching off or autorestart)
      • Undervoltage shutdown
      • Overvoltage clamp
      • Reverse battery protected through power outputs self turn-on (no external components)
      • Load dump protected
      • Protection against loss of ground

EDA符号、封装和3D模型

STMicroelectronics - VNQ6040S-E

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

符号

Footprints

封装

3D model

3D模型

质量与可靠性

产品型号 Marketing Status 等级规格 符合RoHS级别 材料声明**
VNQ6040STR-E
NRND
PWSSO 36 汽车应用 Ecopack2

VNQ6040STR-E

Package:

PWSSO 36

Material Declaration**:

PDF XML

Marketing Status

NRND

Package

PWSSO 36

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持

样片和购买

Swipe or click the button to explore more details Don't show this again
产品型号
供货状态
Budgetary Price (US$)*/Qty
从ST订购
Order from distributors
包装类型
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Operating Temperature (°C) (min)
VNQ6040STR-E
Available at distributors

经销商的可用性 VNQ6040STR-E

代理商名称
地区 库存 最小订购量 第三方链接

代理商库存报告日期:

无法联系到经销商,请联系我们的销售办事处

VNQ6040STR-E NRND

Budgetary Price (US$)*/Qty:
-
包:
包装类型:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

产品型号:

VNQ6040STR-E

Operating Temperature (°C) (min):

-40

代理商名称

代理商库存报告日期:

Swipe or click the button to explore more details Don't show this again

(*) 建议转售单价(美元)仅用于预算用途。如需以当地货币计价的报价,请联系您当地的 ST销售办事处 或我们的 经销商