-
This 32-bit system-on-chip (SoC) automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications—specifically, electrical hydraulic power steering (EHPS) and electric power steering (EPS)—as well as airbag applications.
主要特性
- 64 MHz, single issue, 32-bit CPU core complex (e200z0h)
- Compliant with Power Architecture®embedded category
- Variable Length Encoding (VLE)
- Memory organization
- Up to 512 KB on-chip code flash memory with ECC and erase/program controller
- Additional 64 (4 × 16) KB on-chip data flash memory with ECC for EEPROM emulation
- Up to 40 KB on-chip SRAM with ECC
- Fail safe protection
- Programmable watchdog timer
- Non-maskable interrupt
- Fault collection unit
- Nexus L2+ interface
- Interrupts
- 16-channel eDMA controller
- 16 priority level controller
- General purpose I/Os individually programmable as input, output or special function
- 2 general purpose eTimer units
- 6 timers each with up/down count capabilities
- 16-bit resolution, cascadable counters
- Quadrature decode with rotation direction flag
- Double buffer input capture and output compare
- Communications interfaces
- 2 LINFlex channels (LIN 2.1)
- 4 DSPI channels with automatic chip select generation
- 1 FlexCAN interface (2.0B Active) with 32 message objects
- 1 safety port based on FlexCAN with 32 message objects and up to 7.5 Mbit/s capability; usable as second CAN when not used as safety port
- 1 FlexRay™ module (V2.1) with selectable dual or single channel support, 32 message objects and up to 10 Mbit/s (512 KB device only)
- Two 10-bit analog-to-digital converters (ADC)
- 2 × 11 input channels, + 4 shared channels
- Conversion time < 1 μs including sampling time at full precision
- Programmable ADC Cross Triggering Unit (CTU)
- 4 analog watchdogs with interrupt capability
- On-chip CAN/UART bootstrap loader with Boot Assist Module (BAM)
- 1 FlexPWM unit: 8 complementary or independent outputs with ADC synchronization signals
- 64 MHz, single issue, 32-bit CPU core complex (e200z0h)
下载
样片和购买
| 产品型号 | 供货状态 | 包装类型 | CPU Clock Frequency (MHz) (max) | Flash Size (kB) (Data) | Features set | 温度（ºC） | 预算价格(US$) | 数量 | ECCN (US) | Country of Origin | 更多信息 | 从分销商订购 | 从ST订购 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| min | max | |||||||||||||
| SPC560P50L5CEFAY |
批量生产
|
Tray | 64 | 64 | - | -40 | 125 | 4.9 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5BEAAY |
批量生产
|
Tray | 64 | 64 | - | -40 | 105 | 4.5 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5CEFAR |
批量生产
|
Tape And Reel | 64 | 64 | - | -40 | 125 | 4.9 | 1000 | 3A991A2 | MALTA | 查看供货情况 | 立即购买 | |
| SPC560P50L5BEABR |
批量生产
|
Tape And Reel | 64 | 64 | - | -40 | 105 | 4.5 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5BEABY |
批量生产
|
Tray | 64 | 64 | - | -40 | 105 | 4.5 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5BEFAR |
批量生产
|
Tape And Reel | 64 | 64 | - | -40 | 105 | 4.7 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5BEAAR |
批量生产
|
Tape And Reel | 64 | 64 | - | -40 | 105 | 4.5 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
| SPC560P50L5BEFAY |
批量生产
|
Tray | 64 | 64 | - | -40 | 105 | 4.7 | 1000 | 3A991A2 | MALTA | 没有经销商，请联系我们的销售办事处 | ||
SPC560P50L5CEFAY
供货状态
批量生产包装类型
Tray单价(US$)
4.9*SPC560P50L5BEAAY
供货状态
批量生产包装类型
Tray单价(US$)
4.5*SPC560P50L5BEABR
供货状态
批量生产包装类型
Tape And Reel单价(US$)
4.5*SPC560P50L5BEABY
供货状态
批量生产包装类型
Tray单价(US$)
4.5*SPC560P50L5BEFAR
供货状态
批量生产包装类型
Tape And Reel单价(US$)
4.7*SPC560P50L5BEAAR
供货状态
批量生产包装类型
Tape And Reel单价(US$)
4.5*SPC560P50L5BEFAY
供货状态
批量生产包装类型
Tray单价(US$)
4.7*精选 视频
First Automotive MCUs introducing Phase Change Memory (PCM)
设计工具
开发工具硬件
-
-
Picture 产品型号 制造商 描述 CYCLONE P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. CYCLONE FX P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. DCI-GSI2 dSPACE dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming. Multilink Universal P&E Microcomputer Systems Debug Probe for ARM and other devices. Multilink Universal FX for SPC5 P&E Microcomputer Systems High-Speed Debug Probe for ARM and other devices. PowerDebug JTAG Debugger Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. 
SPC5-CONNECT ST Programmable interface for PC communication to automotive target systems. 
SPC5-UDESTK ST USB/JTAG debugger for SPC5 MCUs with software license included (by PLS) TRACE32 PowerTools Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. UDE/UAD2next for SPC5 PLS UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD2pro for SPC5 PLS UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD3+ for SPC5 PLS UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. XETK calibration interface ETAS The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface. iC5000 On-chip Analyzer iSYSTEM iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing. iC5700 On-chip Analyzer iSYSTEM iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development. iC6000 On-chip Analyzer with Aurora protocol support iSYSTEM iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface. 产品型号Automated, Stand-Alone Production Programmer, Debug & Test.
Automated, Stand-Alone Production Programmer, Debug & Test.
dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.
Debug Probe for ARM and other devices.
High-Speed Debug Probe for ARM and other devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Programmable interface for PC communication to automotive target systems.
USB/JTAG debugger for SPC5 MCUs with software license included (by PLS)
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface.
iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing.
iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development.
iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface.
-
-
-
Picture 产品型号 制造商 描述 ASH/ETEC Ash Ware ETEC C Compiler Toolkit ASH/ETPU Ash Ware ETPU/ETPU2 Development Kit Arctic Studio - Development Tools ARCCORE AUTOSAR and embedded SW configuration. BYTE/eTPU Byte Craft eTPU_C Code Development System Diab Compiler Wind River The Proven Development Tool for Automotive Safety. EB tresos Studio - Development Tools Elektrobit AUTOSAR and embedded SW configuration. ECU Interface Software dSPACE dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing. ICDPPCNEXUS P&E Microcomputer Systems In-circuit debug software for SPC5 and similar devices. MULTI Integrated Development Environment Green Hills Software MULTI Integrated Development Environment MULTISPC56 Green Hills Software MULTI IDE PROGPPCNEXUS P&E Microcomputer Systems Flash programming software for SPC5 and similar devices. PowerView Debugger IDE Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. SPC5-STUDIO ST Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs SPC5-UDEDEBG ST PLS JTAG debugger software full license or license renewal TargetLink dSPACE The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®. UNITPPCNEXUS P&E Microcomputer Systems Interface library for SPC5-compatible PEmicro interfaces. WIND-WORKBENCH Wind River Wind River Workbench WinIDEASPC56 iSYSTEM winIDEA IDE isystem.connect iSYSTEM Automate your testing or other embedded debugging activitites with iSYSTEM's SDK. testIDEA iSYSTEM iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers. winIDEA Open iSYSTEM iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers. 产品型号ETEC C Compiler Toolkit
ETPU/ETPU2 Development Kit
AUTOSAR and embedded SW configuration.
eTPU_C Code Development System
The Proven Development Tool for Automotive Safety.
AUTOSAR and embedded SW configuration.
dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing.
In-circuit debug software for SPC5 and similar devices.
MULTI Integrated Development Environment
MULTI IDE
Flash programming software for SPC5 and similar devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs
PLS JTAG debugger software full license or license renewal
The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®.
Interface library for SPC5-compatible PEmicro interfaces.
Wind River Workbench
winIDEA IDE
Automate your testing or other embedded debugging activitites with iSYSTEM's SDK.
iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers.
iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers.
-
软件
评估工具
-
-
Picture 产品型号 制造商 描述 SPC560PADPT144S ST Daughter/adapter board for SPC560 series 512KB/1MB devices in QFP144 package 
SPC56P-Discovery ST Discovery Kit for SPC56 P line - with SPC560P50L5 MCU 产品型号Daughter/adapter board for SPC560 series 512KB/1MB devices in QFP144 package
Discovery Kit for SPC56 P line - with SPC560P50L5 MCU
-
支持和应用
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| SPC560P50L5BEAAR |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5BEAAY |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5BEABR |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5BEABY |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5BEFAR |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5BEFAY |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5CEFAR |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 | |
| SPC560P50L5CEFAY |
批量生产
|
LQFP 144 20x20x1.4 | 汽车 | Ecopack2 |
SPC560P50L5BEAAR
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5BEAAY
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5BEABR
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5BEABY
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5BEFAR
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5BEFAY
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5CEFAR
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDFSPC560P50L5CEFAY
Package:
LQFP 144 20x20x1.4Material Declaration**:
PDF(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.