产品概述
Recommended replacement product: STLINK-V3MINIE
描述
The STLINK-V3MINI is a stand-alone debugging and programming mini probe for STM32 microcontrollers.
The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.
The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.
The STLINK-V3MINI is a portable version, easy-to-use debugger//programmer including STDC14 interface with its flat cable.
-
所有功能
- Stand-alone probe
- Approximately 15 x 30 mm high-density integration PCB
- Delivered with 1.27 mm pitch STDC14 debug connector and STDC14 to STDC14 flat cable
- Self-powered through a USB connector (Micro-B)
- USB 2.0 high-speed compatible interface
- Direct firmware update support (DFU)
- JTAG / serial wire debugging (SWD) specific features:
- 3 V to 3.6 V application voltage support and 5 V tolerant inputs
- JTAG communication support
- SWD and serial wire viewer (SWV) communication support
- Virtual COM port (VCP) specific features:
- 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
- VCP frequency up to 15 MHz
- Drag-and-drop Flash programming
- Two color LEDs: communication, power
- Includes STDC14 signals protection
全部资源
| 资源标题 | 版本 | 更新时间 |
|---|
产品规格 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 28 Mar 2019 | 28 Mar 2019 |
技术文档 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 5.0 | 07 Mar 2023 | 07 Mar 2023 |
用户手册 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 2.0 | 15 Dec 2021 | 15 Dec 2021 |
Evaluation Board Terms of Use (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.7 | 29 May 2023 | 29 May 2023 |
全部资源
| 资源标题 | 版本 | 更新时间 |
|---|
Board Manufacturing Specifications (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| ZIP | 1.0 | 11 Feb 2022 | 11 Feb 2022 |