产品概述
描述
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
The STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing for instance the programming of the target through the bootloader.
The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop flash programming).
The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.
-
所有功能
- Stand-alone probe with modular extensions
- Self-powered through a USB connector (Micro-B)
- USB 2.0 high-speed compatible interface
- Direct firmware update support (DFU)
- JTAG / serial wire debugging (SWD) specific features:
- 3 to 3.6 V application voltage support and 5 V tolerant inputs
- Flat cables STDC14 to MIPI10 / STDC14 / MIPI20 (connectors with 1.27 mm pitch)
- JTAG communication support
- SWD and serial wire viewer (SWV) communication support
- SWIM specific features (only available with adapter board MB1440):
- 1.65 to 5.5 V application voltage support
- SWIM header (2.54 mm pitch)
- SWIM low-speed and high-speed modes support
- Virtual COM port (VCP) specific features:
- 3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
- VCP frequency up to 15 MHz
- Available on STDC14 debug connector (not available on MIPI10)
- Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
- 3 to 3.6 V application voltage support and 5 V tolerant inputs
- Signals available on adapter board only (MB1440)
- Drag-and-drop flash programming of binary files
- Two-color LEDs: communication, power
您可能还会喜欢...
精选 视频
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. The modular architecture of STLINK-V3SET enables to extend its main features through additional modules such as the adapter board.
Recommended Tools & Software
All tools & software
全部资源
| Resource title | 版本 | Latest update |
|---|
产品规格 (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| 2.0 | 18 Nov 2019 | 18 Nov 2019 |
技术文档 (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| 3.0 | 21 Nov 2019 | 21 Nov 2019 |
用户手册 (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| 1.0 | 05 Feb 2021 | 05 Feb 2021 |
宣传册 (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| 1.1 | 20 May 2020 | 20 May 2020 |
Evaluation Board Terms of Use (1)
| Resource title | 版本 | Latest update | ||
|---|---|---|---|---|
| 1.7 | 28 Apr 2021 | 28 Apr 2021 |
质量与可靠性
| 产品型号 | Marketing Status | 符合RoHS级别 | 材料声明** |
|---|---|---|---|
| STLINK-V3SET | 批量生产 | Ecopack1 | |
STLINK-V3SET
Package:
Ecopack1Material Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。
样片和购买
| 产品型号 | 从分销商订购 | 从ST订购 | 核心产品 | 供货状态 | 供应商 | ECCN (US) | ECCN (EU) | Budgetary Price (US$)*/Qty | |
|---|---|---|---|---|---|---|---|---|---|
| STLINK-V3SET | 5 distributors | Buy Direct | - | 批量生产 | ST | 3A991A2 | NEC | 35.0 / 1 |
