搜索历史

Please log in to show your saved searches.

X-CUBE-CLD-GEN

储存到myST

STM32Cube的通用IoT云软件扩展

获取软件

概述

样片和购买

解决方案

Documentation

工具与软件

质量与可靠性

eDesignSuite

开始

Partner products

Sales Briefcase

The X-CUBE-CLD-GEN Expansion Package consists of a set of libraries and application examples for STM32L4 Series, STM32F4 Series, and STM32F7 Series microcontrollers acting as end devices.

X-CUBE-CLD-GEN runs on five platforms. The B-L475E-IOT01A and 32F413HDISCOVERY support Wi-Fi^® connectivity with an on-board Inventek ISM43362 module. The 32F769IDISCOVERY board provides a native Ethernet interface. The P-L496G-CELL01 and P-L496G-CELL02 packs, with the 2G/3G Quectel UG96 and LTE Quectel BG96 cellular modem daughterboards respectively, support cellular connectivity.
For the five platforms, the sample applications configure the network connectivity parameters, and illustrate the various ways for a device to interact with the cloud.
An application shows how an MQTT client can connect to an MQTT broker in order to publish data and receive parameter updates or commands from the cloud.
Device authentication through MQTT login and password is supported. TLS encryption, server authentication and device authentication are supported.
The MQTT broker can be a self-administrated server like Eclipse Mosquitto™, or the Ubidots cloud platform.
Other applications also demonstrate how a simple HTTP client can connect to either Exosite, Grovestreams or Ubidots cloud platforms using the HTTP or HTTPS protocol.
The B-L475E-IOT01A board reports telemetry data such as measurement of humidity, temperature, 3-axis magnetic, acceleration, and gyroscope data, atmospheric pressure and distance.

主要特性
- Ready-to-run firmware examples with Wi-Fi^®, Ethernet, or cellular connectivity to support quick evaluation and development of IoT cloud applications using MQTT and HTTP protocols
- Connectivity to several IoT cloud platforms:
  
  MQTT protocol: Eclipse Mosquitto™, Ubidots
  
  HTTP protocol: Exosite, Grovestreams, Ubidots
- Cloud communication protocols kept as generic as possible, allowing easy migration of applications to different cloud providers
- TLS encryption
- Cellular, Ethernet and Wi-Fi^® connectivity
- Telemetry data reporting
- LED remote control
阅读更多阅读较少信息

获取软件

产品型号	一般描述	Software Version	供应商	下载
X-CUBE-CLD-GEN	Generic IoT cloud software expansion for STM32Cube	1.0.0	ST	x Warning Please note, that cookies should be enabled for successful downloading the software. x 获取软件服务器请求出错。请稍后重试。如果您在my.st.com上有帐户，即可直接登录并下载软件。如果您现在不想现在登录，只需要在下面的表单中提供您的姓名和电子邮件地址，就可以下载软件。这允许我们保持跟你联系，并通知您有关于此软件的更新。对于后续继续下载，大多数的软件都不再需要此步骤。名: 姓: E-mail address: 请输入有效的电子邮件地址 I have read and understood the Sales Terms & Conditions, Terms of Use and Privacy Policy 要进行下一步，请先同意相关规则。 ST (as data controller according to the Privacy Policy) will keep a record of my navigation history and use that information as well as the personal data that I have communicated to ST for marketing purposes relevant to my interests. My personal data will be provided to ST affiliates and distributors of ST in countries located in the European Union and outside of the European Union for the same marketing purposes --------- I understand that I can withdraw my consent at any time through opt-out links embedded in communication I receive or by managing my account settings. I can also exercise other user’s rights at any time as described in the Privacy Policy. ST will retain your browsing history and use details of the products and services that you have previously accessed, purchased or downloaded to make suggestions to you for other products and services which ST believe you will also be interested in. ST uses the personal data that you provide directly to it and through your activity on ST websites in accordance with the Privacy Policy, to send you (directly or via ST local affiliates or distributors) newsletters, advertisements or other specific and targeted marketing material about ST products and services. Your personal data will be provided to ST local affiliates and distributors in countries located in the European Union and outside of the European Union. You can consult the list of ST local affiliates and distributors in our website’s Privacy Policy. To send you specific and targeted marketing material, the information that you provide directly to ST and/or through your activity on ST websites may also be combined with other information that ST obtains from you in another context (e.g. if you enter into a business relationship with ST, its local affiliates or distributors). Please keep me informed about future updates for this software or new software in the same category To validate your e-mail and start the download, please click on the link inside the e-mail that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the e-mail. x E-mail not yet validated The e-mail address that you have entered during the download attempt has not yet been validated. Please check your inbox for the e-mail with the download link. In case you did not receive the e-mail, or you entered a wrong e-mail address, you can start-over the process. x About Requesting Software For security / validation purposes, all software download requests must originate from a valid email address. ST.com users may login at this time to begin download. Non-ST.com users may either create an account at this time or enter an email address to receive a download link to the software. x 许可协议接受 Please indicate your acceptance or NON-acceptance by selecting “I ACCEPT” or “I DO NOT ACCEPT” as indicated below in the media. BY INSTALLING COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THIS SOFTWARE PACKAGE OR ANY PART THEREOF (AND THE RELATED DOCUMENTATION) FROM STMICROELECTRONICS INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED COMPANIES (STMICROELECTRONICS), THE RECIPIENT, ON BEHALF OF HIMSELF OR HERSELF, OR ON BEHALF OF ANY ENTITY BY WHICH SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES TO BE BOUND BY THIS SOFTWARE PACKAGE LICENSE AGREEMENT. Under STMicroelectronics’ intellectual property rights and subject to applicable licensing terms for any third-party software incorporated in this software package and applicable Open Source Terms (as defined here below), the redistribution, reproduction and use in source and binary forms of the software package or any part thereof, with or without modification, are permitted provided that the following conditions are met: Redistribution of source code (modified or not) must retain any copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form, except as embedded into microcontroller or microprocessor device manufactured by or for STMicroelectronics or a software update for such device, must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of STMicroelectronics nor the names of other contributors to this software package may be used to endorse or promote products derived from this software package or part thereof without specific written permission. This software package or any part thereof, including modifications and/or derivative works of this software package, must be used and execute solely and exclusively on or in combination with a microcontroller or a microprocessor devices manufactured by or for STMicroelectronics. No use, reproduction or redistribution of this software package partially or totally may be done in any manner that would subject this software package to any Open Source Terms (as defined below). Some portion of the software package may contain software subject to Open Source Terms (as defined below) applicable for each such portion (“Open Source Software”), as further specified in the software package. Such Open Source Software is supplied under the applicable Open Source Terms and is not subject to the terms and conditions of license hereunder. “Open Source Terms” shall mean any open source license which requires as part of distribution of software that the source code of such software is distributed therewith or otherwise made available, or open source license that substantially complies with the Open Source definition specified at www.opensource.org and any other comparable open source license such as for example GNU General Public License (GPL), Eclipse Public License (EPL), Apache Software License, BSD license and MIT license. This software package may also include third party software as expressly specified in the software package subject to specific license terms from such third parties. Such third party software is supplied under such specific license terms and is not subject to the terms and conditions of license hereunder. By installing copying, downloading, accessing or otherwise using this software package, the recipient agrees to be bound by such license terms with regard to such third party software. STMicroelectronics has no obligation to provide any maintenance, support or updates for the software package. The software package is and will remain the exclusive property of STMicroelectronics and its licensors. The recipient will not take any action that jeopardizes STMicroelectronics and its licensors' proprietary rights or acquire any rights in the software package, except the limited rights specified hereunder. The recipient shall comply with all applicable laws and regulations affecting the use of the software package or any part thereof including any applicable export control law or regulation. Redistribution and use of this software package partially or any part thereof other than as permitted under this license is void and will automatically terminate your rights under this license. THIS SOFTWARE PACKAGE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER AND SUBJECT TO THE APPLICABLE LICENSING TERMS FOR ANY THIRD-PARTY SOFTWARE INCORPORATED IN THE SOFTWARE PACKAGE AND OPEN SOURCE TERMS AS APPLICABLE, NO LICENSE OR OTHER RIGHTS, WHETHER EXPRESS OR IMPLIED, ARE GRANTED UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF STMICROELECTRONICS OR ANY THIRD PARTY. Save as PDF 拒绝接受

ST最新信息

电子邮件: *

我想订阅ST最新新闻的电子报

我同意ST（作为根据隐私政策的数据管理者）将记录我的浏览历史，并使用该信息以及我传达给ST的个人数据用于与我的兴趣相关的营销目的。我的个人数据将被提供给位于欧盟和欧盟以外国家的意法半导体分公司和分销商，用于相同的营销目的阅读更多

---------
我了解我可以随时通过我收到的通信中的退订链接或管理我的帐户更改我的设置，我也可以按照隐私政策中的规定随时行使其他作为用户的权利

我已阅读并接受使用条款和隐私策略 *

All resources

产品规格 (1)

	Resource title		Latest update
PDF	DB3501 IoT cloud generic software expansion for STM32Cube 1.0		27 Mar 2018	27 Mar 2018 DB3501 IoT cloud generic software expansion for STM32Cube 1.0

用户手册 (4)

	Resource title	Latest update
PDF	UM2312 STM32Cube扩展包开发清单 1.0	06 Sep 2019	06 Sep 2019 UM2312 STM32Cube扩展包开发清单 1.0
PDF	UM2285 STM32Cube扩展包开发指南 1.0	10 Sep 2020	10 Sep 2020 UM2285 STM32Cube扩展包开发指南 1.0
PDF	UM2388 Development guidelines for STM32Cube firmware Packs 1.0	27 Jul 2020	27 Jul 2020 UM2388 Development guidelines for STM32Cube firmware Packs 1.0
PDF	UM2347 Getting started with X-CUBE-CLD-GEN IoT cloud generic software expansion for STM32Cube 2.0	13 Sep 2018	13 Sep 2018 UM2347 Getting started with X-CUBE-CLD-GEN IoT cloud generic software expansion for STM32Cube 2.0

简报 (4)

	Resource title	Latest update
PDF	IoT: Cloud Connectivity Expansion Packages for STM32Cube 2.0	26 Mar 2020	26 Mar 2020 IoT: Cloud Connectivity Expansion Packages for STM32Cube 2.0
PDF	STM32 and STM8 embedded software solutions 8.0	14 Apr 2020	14 Apr 2020 STM32 and STM8 embedded software solutions 8.0
PDF	STM32Cube and Azure RTOS overview 1.0	09 Dec 2020	09 Dec 2020 STM32Cube and Azure RTOS overview 1.0
PDF	STM32Cube ecosystem overview - Making STM32 development easier 1.2	11 Aug 2020	11 Aug 2020 STM32Cube ecosystem overview - Making STM32 development easier 1.2

手册 (2)

	Resource title		Latest update
PDF	STM32 Open Development Environment Brochure 17.09		11 Sep 2018	11 Sep 2018 STM32 Open Development Environment Brochure 17.09
PDF	Sensor & motion algorithm software pack for STM32Cube 1.0		29 Oct 2018	29 Oct 2018 Sensor & motion algorithm software pack for STM32Cube 1.0

许可协议 (1)

	Resource title		Latest update
PDF	SLA0048 Mix Ultimate Liberty+OSS+3rd-party V1 - SOFTWARE LICENSE AGREEMENT 6.10		09 Dec 2020	09 Dec 2020 SLA0048 Mix Ultimate Liberty+OSS+3rd-party V1 - SOFTWARE LICENSE AGREEMENT 6.10

搜索历史

收藏

X-CUBE-CLD-GEN

获取软件

特别推荐

ST最新信息

All resources

产品规格 (1)

用户手册 (4)

简报 (4)

手册 (2)

许可协议 (1)

搜索历史

收藏

X-CUBE-CLD-GEN

服务器请求出错。请稍后重试。

项目标题：

项目描述:

应用:

最终应用：

业务性质：

军事相关：

Country/Region where the Software will be used

注释：

软件请求已成功提交。审批过程可能需要48小时。获批后，你会通过电子邮件收到所请求软件的链接。

获取软件

Please note, that cookies should be enabled for successful downloading the software.

服务器请求出错。请稍后重试。

名:

姓:

E-mail address:

To validate your e-mail and start the download, please click on the link inside the e-mail that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the e-mail.

许可协议

精选 视频

特别推荐

ST最新信息

To validate your subscription, please click on the link inside the email that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the email.

All resources

产品规格 (1)

用户手册 (4)

简报 (4)

手册 (2)

许可协议 (1)

精选视频