-
The EVAL-L9177A is an Evaluation Board designed to evaluate L9177A, a smart power device designed by STMicroelectronics in advanced BCD technology.
L9177A is able to drive all the relevant loads used in one/two cylinder powertrain applications (Injectors, Relay, stepper motor, tachometer, etc.), to interface with Variable Reluctance Sensors and Hall sensors, to monitor diagnostic functionalities and to interact with the main networks present in powertrain environment (K-Line).
All channels are protected against short circuit and over-temperature condition.
The board can be connected to the SPC563M-DISP, the Discovery+ board developed for the SPC563M64L.主要特性
- Voltage min/max: 3.9 V to 30 V.
- No. channels:
- 2 injector driver
- 1 Lambda sensor heater
- 3 relay driver
- 1 LED/Lamp driver
- Tachometer driver
- Stepper motor driver
- 1 Protected High side dirver
- Device registers setting and the full diagnostic are available through SPI.
- Communication protocols: SPI, Kline.
- Access to all relevant pins by test points.
- Input signal connector compatible with the SPC563M-DISP (SPC563M64L Discovery+ evaluation board).
- Possibility to connect a generic microcontroller boards by using a simple adapter.
- Package: TQFP-64
软件
-
-
Combining the SPC56M-Discovery board and EVAL-L9177A evaluation board with related Graphical User Interface (GUI) STSW-L9177A, you can easily evaluate your Small EMS for 2- and 3-wheeled wheeled road vehicles (up to 2 cylinders). These solutions can also be used for non-road equipment such as power generators, lawn mowers and snow blowers. Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllEVAL-L9177A 主要特性
- Voltage min/max: 3.9 V to 30 V.
- No. channels:
- 2 injector driver
- 1 Lambda sensor heater
- 3 relay driver
- 1 LED/Lamp driver
- Tachometer driver
- Stepper motor driver
- 1 Protected High side dirver
- Device registers setting and the full diagnostic are available through SPI.
- Communication protocols: SPI, Kline.
- Access to all relevant pins by test points.
- Input signal connector compatible with the SPC563M-DISP (SPC563M64L Discovery+ evaluation board).
- Possibility to connect a generic microcontroller boards by using a simple adapter.
- Package: TQFP-64
Evaluation board for L9177A 批量生产L97177A 104.13 Buy now SPC56M-Discovery 主要特性
- SPC563M64L7 32-bit Power Architecture® Book E compliant e200z335 CPU core, 1.5Mbyte on-chip in an LQFP176 package.
- Board Supply: Single 5VDC external power supply input.
- All GPIOs and DSPI/uSB signals accessible by a 4x36 100mil pin grid array allowing connection of an additional boards for dedicated applications.
- JTAG interface (7x2 male 100mil)
- 2 high speed CAN interface (DB9 male)
- 2 eSCI interface (DB9 female) or 1
- SCI interface + 1 K-LINE interface.
- 2 deserial serial peripheral interface (DSPI) modules (compatible with Microsecond Bus)
- 1 Optional high speed Nexus interface
- 4 LEDs: LE3 for 5 V power on,LE4 for Reset, LE1 and LE2 for GPIO99 and GPIO98 (for user)
- 12MHz crystal.
- 2 potentiometers for ADC quick evaluation
- Reset push button.
- Board size 145 x 97.5mm
Discovery Plus Kit for SPC56 M line - with SPC563M64L7 MCU 批量生产93.10 Buy now STSW-L9177A EVAL-L9177A Graphical User Interface 批量生产- 产品型号 供应商 下载 STSW-L9177A ST STSW-L9177ADescription:
EVAL-L9177A Graphical User InterfacePrice (US$)*
-产品型号 供应商 下载 STSW-L9177A ST
-
| 产品型号 | 供货状态 | 符合RoHS级别 | WEEE Compliant | 材料声明** |
|---|---|---|---|---|
| EVAL-L9177A | 批量生产 | Not compliant | - | |
EVAL-L9177A
Package:
Not compliantMaterial Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。
