概述
样片和购买
解决方案
资源
工具与软件
质量与可靠性
eDesignSuite
开始
Partner products
Sales Briefcase
  • The EVAL-SPBTLE-1S evaluation platform is based on the SPBTLE-1S very low power application processor module compliant to Bluetooth® Low Energy v4.2 specifications and supporting master, slave and simultaneous master-and-slave roles.

    The EVAL-SPBTLE-1S is compatible with the ST Morpho and Arduino UNO R3 connector layout (the user can mount the ST Morpho connectors, if required), allowing the expansion of every board including those connector layouts.
    The SPBTLE-1S module is FCC certified (FCC ID: S9NSPBTLE1S), IC certified (IC: 8976C-SPBTLE1S), SRRC certified (SRRC CMIIT ID: 2017DJ5956), TYPE certified (Certification number 006-000535), CE/RED certified, and Bluetooth SIG End Product certified (Declaration ID D034470, Qualified design ID 92838).

    主要特性

    • Expansion board based on the SPBTLE-1S very low power application processor module for Bluetooth® Low Energy v4.2
      • Supports master and slave modes
      • Multiple roles supported simultaneously
    • Embedded BlueNRG-1 BLE SoC
      • High performance, ultra-low power Cortex-M0 32-bit based core
      • Programmable embedded 160 kB Flash
      • 24 kB embedded RAM with data retention
      • AES security co-processor
    • Configurable as a network coprocessor via dedicated firmware supporting commands over SPI interface
    • Embedded BALF-NRG-01D3 integrated matched balun with harmonic filter, and high efficiency chip antenna
    • Up to +4 dBm available output power
    • Equipped with 1 x UART, 1 x I2C, 1xSPI and 1x PDM interfaces, 14 x GPIO, watchdog, RTC, and DMA controller
    • Complemented with Bluetooth low energy protocol stack library (GAP, GATT, SM, L2CAP, LL)
    • Compatible with ST Morpho connectors
    • Equipped with Arduino UNO R3 connectors
    • SWD programming and debugging connector
    • SPBTLE-1S certification
      • CE qualified
      • FCC, IC modular approval certified
      • TYPE qualified
      • BQE qualified
    • Pre-programmed UART bootloader
    • Operating supply voltage: from 1.7 to 3.6 V
    • RoHS compliant

适合您的资源

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      DB3901
      Evaluation platform based on very low power module for Bluetooth® low energy v4.2
      1.0
      246.92 KB
      PDF
      DB3901

      Evaluation platform based on very low power module for Bluetooth® low energy v4.2

法律

    • 描述 版本 文档大小 操作
      Terms of use 1.7
      57.54 KB
      PDF

      Terms of use

质量与可靠性

产品型号 Marketing Status 封装 等级规格 符合RoHS级别 WEEE Compliant 材料声明**
EVAL-SPBTLE-1S
建议
- 工业 - -

EVAL-SPBTLE-1S

Package:

-

Material Declaration**:

Marketing Status

建议

Package

-

Grade

Industrial

RoHS Compliance Grade

-

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持

样片和购买

产品型号
从分销商订购
从ST订购
核心产品
供货状态
ECCN (US)
Country of Origin
Budgetary Price (US$)*/Qty
EVAL-SPBTLE-1S 没有经销商,请联系我们的销售办事处 SPBTLE-1S
建议
- -

EVAL-SPBTLE-1S

核心产品

SPBTLE-1S

供货状态

建议

Budgetary Price (US$)*/Qty

Budgetary Price (US$)* / Qty

ECCN (US)

-

Country of Origin

-

(*) 建议转售单价(美元)仅用于预算用途。如需以当地货币计价的报价,请联系您当地的 ST销售办事处 或我们的 经销商